return "(unknown)";
}
-void intel_dsi_vbt_exec_sequence(struct intel_dsi *intel_dsi,
- enum mipi_seq seq_id)
+static void intel_dsi_vbt_exec(struct intel_dsi *intel_dsi,
+ enum mipi_seq seq_id)
{
struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev);
const u8 *data;
}
}
+void intel_dsi_vbt_exec_sequence(struct intel_dsi *intel_dsi,
+ enum mipi_seq seq_id)
+{
+ if (seq_id == MIPI_SEQ_POWER_ON && intel_dsi->gpio_panel)
+ gpiod_set_value_cansleep(intel_dsi->gpio_panel, 1);
+
+ intel_dsi_vbt_exec(intel_dsi, seq_id);
+
+ if (seq_id == MIPI_SEQ_POWER_OFF && intel_dsi->gpio_panel)
+ gpiod_set_value_cansleep(intel_dsi->gpio_panel, 0);
+}
+
void intel_dsi_msleep(struct intel_dsi *intel_dsi, int msec)
{
struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev);
return true;
}
+
+/*
+ * On some BYT/CHT devs some sequences are incomplete and we need to manually
+ * control some GPIOs.
+ */
+void intel_dsi_vbt_gpio_init(struct intel_dsi *intel_dsi)
+{
+ struct drm_device *dev = intel_dsi->base.base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
+
+ if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
+ mipi_config->pwm_blc == PPS_BLC_PMIC) {
+ intel_dsi->gpio_panel =
+ gpiod_get(dev->dev, "panel", GPIOD_OUT_HIGH);
+
+ if (IS_ERR(intel_dsi->gpio_panel)) {
+ DRM_ERROR("Failed to own gpio for panel control\n");
+ intel_dsi->gpio_panel = NULL;
+ }
+ }
+}
+
+void intel_dsi_vbt_gpio_cleanup(struct intel_dsi *intel_dsi)
+{
+ if (intel_dsi->gpio_panel) {
+ gpiod_put(intel_dsi->gpio_panel);
+ intel_dsi->gpio_panel = NULL;
+ }
+}
* Author: Jani Nikula <jani.nikula@intel.com>
*/
-#include <linux/gpio/consumer.h>
#include <linux/slab.h>
#include <drm/drm_atomic_helper.h>
if (!IS_GEMINILAKE(dev_priv))
intel_dsi_prepare(encoder, pipe_config);
- /* Power on, try both CRC pmic gpio and VBT */
- if (intel_dsi->gpio_panel)
- gpiod_set_value_cansleep(intel_dsi->gpio_panel, 1);
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_POWER_ON);
intel_dsi_msleep(intel_dsi, intel_dsi->panel_on_delay);
/* Assert reset */
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_ASSERT_RESET);
- /* Power off, try both CRC pmic gpio and VBT */
intel_dsi_msleep(intel_dsi, intel_dsi->panel_off_delay);
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_POWER_OFF);
- if (intel_dsi->gpio_panel)
- gpiod_set_value_cansleep(intel_dsi->gpio_panel, 0);
/*
* FIXME As we do with eDP, just make a note of the time here
{
struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
- /* dispose of the gpios */
- if (intel_dsi->gpio_panel)
- gpiod_put(intel_dsi->gpio_panel);
-
+ intel_dsi_vbt_gpio_cleanup(intel_dsi);
intel_encoder_destroy(encoder);
}
vlv_dphy_param_init(intel_dsi);
- /*
- * In case of BYT with CRC PMIC, we need to use GPIO for
- * Panel control.
- */
- if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
- (dev_priv->vbt.dsi.config->pwm_blc == PPS_BLC_PMIC)) {
- intel_dsi->gpio_panel =
- gpiod_get(dev->dev, "panel", GPIOD_OUT_HIGH);
-
- if (IS_ERR(intel_dsi->gpio_panel)) {
- DRM_ERROR("Failed to own gpio for panel control\n");
- intel_dsi->gpio_panel = NULL;
- }
- }
+ intel_dsi_vbt_gpio_init(intel_dsi);
drm_connector_init(dev, connector, &intel_dsi_connector_funcs,
DRM_MODE_CONNECTOR_DSI);