ARM: dts: imx25: mbimxsd25: native-mode is part of display-timings

Move the native-mode property inside the display-timings node.

According to
Documentation/devicetree/bindings/display/panel/display-timing.txt.
native-mode is a property of the display-timings node.

If it's located outside of display-timings, the native-mode setting is
ignored and the first display timing is used (which is a problem only if
someone adds another display timing).

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
index d60d8f464ca955e56e412a8de40ef847bdbf8751..24027a1fb46d11e12c65b8c5307a3e3563943d8e 100644 (file)
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
@@ -14,8 +14,8 @@ dvi_vga: display {
                bits-per-pixel = <16>;
                fsl,pcr = <0xfa208b80>;
                bus-width = <18>;
-               native-mode = <&dvi_vga_timings>;
                display-timings {
+                       native-mode = <&dvi_vga_timings>;
                        dvi_vga_timings: 640x480 {
                                clock-frequency = <31250000>;
                                hactive = <640>;