--- /dev/null
+======================================
+Component Helper for Aggregate Drivers
+======================================
+
+.. kernel-doc:: drivers/base/component.c
+ :doc: overview
+
+
+API
+===
+
+.. kernel-doc:: include/linux/component.h
+ :internal:
+
+.. kernel-doc:: drivers/base/component.c
+ :export:
+
.. |struct dev_pm_domain| replace:: :c:type:`struct dev_pm_domain <dev_pm_domain>`
.. |struct generic_pm_domain| replace:: :c:type:`struct generic_pm_domain <generic_pm_domain>`
+
+.. _device_link:
+
============
Device links
============
device_connection
dma-buf
device_link
+ component
message-based
sound
frame-buffer
#include <linux/slab.h>
#include <linux/debugfs.h>
+/**
+ * DOC: overview
+ *
+ * The component helper allows drivers to collect a pile of sub-devices,
+ * including their bound drivers, into an aggregate driver. Various subsystems
+ * already provide functions to get hold of such components, e.g.
+ * of_clk_get_by_name(). The component helper can be used when such a
+ * subsystem-specific way to find a device is not available: The component
+ * helper fills the niche of aggregate drivers for specific hardware, where
+ * further standardization into a subsystem would not be practical. The common
+ * example is when a logical device (e.g. a DRM display driver) is spread around
+ * the SoC on various component (scanout engines, blending blocks, transcoders
+ * for various outputs and so on).
+ *
+ * The component helper also doesn't solve runtime dependencies, e.g. for system
+ * suspend and resume operations. See also :ref:`device links<device_link>`.
+ *
+ * Components are registered using component_add() and unregistered with
+ * component_del(), usually from the driver's probe and disconnect functions.
+ *
+ * Aggregate drivers first assemble a component match list of what they need
+ * using component_match_add(). This is then registered as an aggregate driver
+ * using component_master_add_with_match(), and unregistered using
+ * component_master_del().
+ */
+
struct component;
struct component_match_array {
void *data;
int (*compare)(struct device *, void *);
+ int (*compare_typed)(struct device *, int, void *);
void (*release)(struct device *, void *);
struct component *component;
bool duplicate;
bool bound;
const struct component_ops *ops;
+ int subcomponent;
struct device *dev;
};
}
static struct component *find_component(struct master *master,
- int (*compare)(struct device *, void *), void *compare_data)
+ struct component_match_array *mc)
{
struct component *c;
if (c->master && c->master != master)
continue;
- if (compare(c->dev, compare_data))
+ if (mc->compare && mc->compare(c->dev, mc->data))
+ return c;
+
+ if (mc->compare_typed &&
+ mc->compare_typed(c->dev, c->subcomponent, mc->data))
return c;
}
if (match->compare[i].component)
continue;
- c = find_component(master, mc->compare, mc->data);
+ c = find_component(master, mc);
if (!c) {
ret = -ENXIO;
break;
return 0;
}
-/*
- * Add a component to be matched, with a release function.
- *
- * The match array is first created or extended if necessary.
- */
-void component_match_add_release(struct device *master,
+static void __component_match_add(struct device *master,
struct component_match **matchptr,
void (*release)(struct device *, void *),
- int (*compare)(struct device *, void *), void *compare_data)
+ int (*compare)(struct device *, void *),
+ int (*compare_typed)(struct device *, int, void *),
+ void *compare_data)
{
struct component_match *match = *matchptr;
}
match->compare[match->num].compare = compare;
+ match->compare[match->num].compare_typed = compare_typed;
match->compare[match->num].release = release;
match->compare[match->num].data = compare_data;
match->compare[match->num].component = NULL;
match->num++;
}
+
+/**
+ * component_match_add_release - add a component match with release callback
+ * @master: device with the aggregate driver
+ * @matchptr: pointer to the list of component matches
+ * @release: release function for @compare_data
+ * @compare: compare function to match against all components
+ * @compare_data: opaque pointer passed to the @compare function
+ *
+ * Adds a new component match to the list stored in @matchptr, which the @master
+ * aggregate driver needs to function. The list of component matches pointed to
+ * by @matchptr must be initialized to NULL before adding the first match. This
+ * only matches against components added with component_add().
+ *
+ * The allocated match list in @matchptr is automatically released using devm
+ * actions, where upon @release will be called to free any references held by
+ * @compare_data, e.g. when @compare_data is a &device_node that must be
+ * released with of_node_put().
+ *
+ * See also component_match_add() and component_match_add_typed().
+ */
+void component_match_add_release(struct device *master,
+ struct component_match **matchptr,
+ void (*release)(struct device *, void *),
+ int (*compare)(struct device *, void *), void *compare_data)
+{
+ __component_match_add(master, matchptr, release, compare, NULL,
+ compare_data);
+}
EXPORT_SYMBOL(component_match_add_release);
+/**
+ * component_match_add_typed - add a compent match for a typed component
+ * @master: device with the aggregate driver
+ * @matchptr: pointer to the list of component matches
+ * @compare_typed: compare function to match against all typed components
+ * @compare_data: opaque pointer passed to the @compare function
+ *
+ * Adds a new component match to the list stored in @matchptr, which the @master
+ * aggregate driver needs to function. The list of component matches pointed to
+ * by @matchptr must be initialized to NULL before adding the first match. This
+ * only matches against components added with component_add_typed().
+ *
+ * The allocated match list in @matchptr is automatically released using devm
+ * actions.
+ *
+ * See also component_match_add_release() and component_match_add_typed().
+ */
+void component_match_add_typed(struct device *master,
+ struct component_match **matchptr,
+ int (*compare_typed)(struct device *, int, void *), void *compare_data)
+{
+ __component_match_add(master, matchptr, NULL, NULL, compare_typed,
+ compare_data);
+}
+EXPORT_SYMBOL(component_match_add_typed);
+
static void free_master(struct master *master)
{
struct component_match *match = master->match;
kfree(master);
}
+/**
+ * component_master_add_with_match - register an aggregate driver
+ * @dev: device with the aggregate driver
+ * @ops: callbacks for the aggregate driver
+ * @match: component match list for the aggregate driver
+ *
+ * Registers a new aggregate driver consisting of the components added to @match
+ * by calling one of the component_match_add() functions. Once all components in
+ * @match are available, it will be assembled by calling
+ * &component_master_ops.bind from @ops. Must be unregistered by calling
+ * component_master_del().
+ */
int component_master_add_with_match(struct device *dev,
const struct component_master_ops *ops,
struct component_match *match)
}
EXPORT_SYMBOL_GPL(component_master_add_with_match);
+/**
+ * component_master_del - unregister an aggregate driver
+ * @dev: device with the aggregate driver
+ * @ops: callbacks for the aggregate driver
+ *
+ * Unregisters an aggregate driver registered with
+ * component_master_add_with_match(). If necessary the aggregate driver is first
+ * disassembled by calling &component_master_ops.unbind from @ops.
+ */
void component_master_del(struct device *dev,
const struct component_master_ops *ops)
{
devres_release_group(component->dev, component);
}
+/**
+ * component_unbind_all - unbind all component to an aggregate driver
+ * @master_dev: device with the aggregate driver
+ * @data: opaque pointer, passed to all components
+ *
+ * Unbinds all components to the aggregate @dev by passing @data to their
+ * &component_ops.unbind functions. Should be called from
+ * &component_master_ops.unbind.
+ */
void component_unbind_all(struct device *master_dev, void *data)
{
struct master *master;
return ret;
}
+/**
+ * component_bind_all - bind all component to an aggregate driver
+ * @master_dev: device with the aggregate driver
+ * @data: opaque pointer, passed to all components
+ *
+ * Binds all components to the aggregate @dev by passing @data to their
+ * &component_ops.bind functions. Should be called from
+ * &component_master_ops.bind.
+ */
int component_bind_all(struct device *master_dev, void *data)
{
struct master *master;
}
EXPORT_SYMBOL_GPL(component_bind_all);
-int component_add(struct device *dev, const struct component_ops *ops)
+static int __component_add(struct device *dev, const struct component_ops *ops,
+ int subcomponent)
{
struct component *component;
int ret;
component->ops = ops;
component->dev = dev;
+ component->subcomponent = subcomponent;
dev_dbg(dev, "adding component (ops %ps)\n", ops);
return ret < 0 ? ret : 0;
}
+
+/**
+ * component_add_typed - register a component
+ * @dev: component device
+ * @ops: component callbacks
+ * @subcomponent: nonzero identifier for subcomponents
+ *
+ * Register a new component for @dev. Functions in @ops will be call when the
+ * aggregate driver is ready to bind the overall driver by calling
+ * component_bind_all(). See also &struct component_ops.
+ *
+ * @subcomponent must be nonzero and is used to differentiate between multiple
+ * components registerd on the same device @dev. These components are match
+ * using component_match_add_typed().
+ *
+ * The component needs to be unregistered at driver unload/disconnect by
+ * calling component_del().
+ *
+ * See also component_add().
+ */
+int component_add_typed(struct device *dev, const struct component_ops *ops,
+ int subcomponent)
+{
+ if (WARN_ON(subcomponent == 0))
+ return -EINVAL;
+
+ return __component_add(dev, ops, subcomponent);
+}
+EXPORT_SYMBOL_GPL(component_add_typed);
+
+/**
+ * component_add - register a component
+ * @dev: component device
+ * @ops: component callbacks
+ *
+ * Register a new component for @dev. Functions in @ops will be called when the
+ * aggregate driver is ready to bind the overall driver by calling
+ * component_bind_all(). See also &struct component_ops.
+ *
+ * The component needs to be unregistered at driver unload/disconnect by
+ * calling component_del().
+ *
+ * See also component_add_typed() for a variant that allows multipled different
+ * components on the same device.
+ */
+int component_add(struct device *dev, const struct component_ops *ops)
+{
+ return __component_add(dev, ops, 0);
+}
EXPORT_SYMBOL_GPL(component_add);
+/**
+ * component_del - unregister a component
+ * @dev: component device
+ * @ops: component callbacks
+ *
+ * Unregister a component added with component_add(). If the component is bound
+ * into an aggregate driver, this will force the entire aggregate driver, including
+ * all its components, to be unbound.
+ */
void component_del(struct device *dev, const struct component_ops *ops)
{
struct component *c, *component = NULL;
{
int ret;
- ret = component_add(dev_priv->drm.dev, &i915_audio_component_bind_ops);
+ ret = component_add_typed(dev_priv->drm.dev,
+ &i915_audio_component_bind_ops,
+ I915_COMPONENT_AUDIO);
if (ret < 0) {
DRM_ERROR("failed to add audio component (%d)\n", ret);
/* continue with reduced functionality */
#define _INTEL_DISPLAY_H_
#include <drm/drm_util.h>
+#include <drm/i915_drm.h>
enum i915_gpio {
GPIOA,
for ((__p) = PLANE_PRIMARY; (__p) < I915_MAX_PLANES; (__p)++) \
for_each_if((__crtc)->plane_ids_mask & BIT(__p))
-enum port {
- PORT_NONE = -1,
-
- PORT_A = 0,
- PORT_B,
- PORT_C,
- PORT_D,
- PORT_E,
- PORT_F,
-
- I915_MAX_PORTS
-};
-
-#define port_name(p) ((p) + 'A')
-
/*
* Ports identifier referenced from other drivers.
* Expected to remain stable over time
Supported SoCs:
Intel Bay Trail
+
+config INTEL_MEI_HDCP
+ tristate "Intel HDCP2.2 services of ME Interface"
+ select INTEL_MEI_ME
+ depends on DRM_I915
+ help
+ MEI Support for HDCP2.2 Services on Intel platforms.
+
+ Enables the ME FW services required for HDCP2.2 support through
+ I915 display driver of Intel.
mei-$(CONFIG_EVENT_TRACING) += mei-trace.o
CFLAGS_mei-trace.o = -I$(src)
+
+obj-$(CONFIG_INTEL_MEI_HDCP) += hdcp/
#define MEI_UUID_MKHIF_FIX UUID_LE(0x55213584, 0x9a29, 0x4916, \
0xba, 0xdf, 0xf, 0xb7, 0xed, 0x68, 0x2a, 0xeb)
+#define MEI_UUID_HDCP UUID_LE(0xB638AB7E, 0x94E2, 0x4EA2, \
+ 0xA5, 0x52, 0xD1, 0xC5, 0x4B, 0x62, 0x7F, 0x04)
+
#define MEI_UUID_ANY NULL_UUID_LE
/**
cldev->do_match = 0;
}
+/**
+ * whitelist - forcefully whitelist client
+ *
+ * @cldev: me clients device
+ */
+static void whitelist(struct mei_cl_device *cldev)
+{
+ dev_dbg(&cldev->dev, "running hook %s\n", __func__);
+
+ cldev->do_match = 1;
+}
+
#define OSTYPE_LINUX 2
struct mei_os_ver {
__le16 build;
MEI_FIXUP(MEI_UUID_NFC_HCI, mei_nfc),
MEI_FIXUP(MEI_UUID_WD, mei_wd),
MEI_FIXUP(MEI_UUID_MKHIF_FIX, mei_mkhi_fix),
+ MEI_FIXUP(MEI_UUID_HDCP, whitelist),
};
/**
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2019, Intel Corporation.
+#
+# Makefile - HDCP client driver for Intel MEI Bus Driver.
+
+obj-$(CONFIG_INTEL_MEI_HDCP) += mei_hdcp.o
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Copyright © 2019 Intel Corporation
+ *
+ * Mei_hdcp.c: HDCP client driver for mei bus
+ *
+ * Author:
+ * Ramalingam C <ramalingam.c@intel.com>
+ */
+
+/**
+ * DOC: MEI_HDCP Client Driver
+ *
+ * This is a client driver to the mei_bus to make the HDCP2.2 services of
+ * ME FW available for the interested consumers like I915.
+ *
+ * This module will act as a translation layer between HDCP protocol
+ * implementor(I915) and ME FW by translating HDCP2.2 authentication
+ * messages to ME FW command payloads and vice versa.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/uuid.h>
+#include <linux/mei_cl_bus.h>
+#include <linux/component.h>
+#include <drm/drm_connector.h>
+#include <drm/i915_component.h>
+#include <drm/i915_mei_hdcp_interface.h>
+
+#include "mei_hdcp.h"
+
+static inline u8 mei_get_ddi_index(enum port port)
+{
+ switch (port) {
+ case PORT_A:
+ return MEI_DDI_A;
+ case PORT_B ... PORT_F:
+ return (u8)port;
+ default:
+ return MEI_DDI_INVALID_PORT;
+ }
+}
+
+/**
+ * mei_hdcp_initiate_session() - Initiate a Wired HDCP2.2 Tx Session in ME FW
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @ake_data: AKE_Init msg output.
+ *
+ * Return: 0 on Success, <0 on Failure.
+ */
+static int
+mei_hdcp_initiate_session(struct device *dev, struct hdcp_port_data *data,
+ struct hdcp2_ake_init *ake_data)
+{
+ struct wired_cmd_initiate_hdcp2_session_in session_init_in = { { 0 } };
+ struct wired_cmd_initiate_hdcp2_session_out
+ session_init_out = { { 0 } };
+ struct mei_cl_device *cldev;
+ ssize_t byte;
+
+ if (!dev || !data || !ake_data)
+ return -EINVAL;
+
+ cldev = to_mei_cl_device(dev);
+
+ session_init_in.header.api_version = HDCP_API_VERSION;
+ session_init_in.header.command_id = WIRED_INITIATE_HDCP2_SESSION;
+ session_init_in.header.status = ME_HDCP_STATUS_SUCCESS;
+ session_init_in.header.buffer_len =
+ WIRED_CMD_BUF_LEN_INITIATE_HDCP2_SESSION_IN;
+
+ session_init_in.port.integrated_port_type = data->port_type;
+ session_init_in.port.physical_port = mei_get_ddi_index(data->port);
+ session_init_in.protocol = data->protocol;
+
+ byte = mei_cldev_send(cldev, (u8 *)&session_init_in,
+ sizeof(session_init_in));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+ return byte;
+ }
+
+ byte = mei_cldev_recv(cldev, (u8 *)&session_init_out,
+ sizeof(session_init_out));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+ return byte;
+ }
+
+ if (session_init_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+ dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n",
+ WIRED_INITIATE_HDCP2_SESSION,
+ session_init_out.header.status);
+ return -EIO;
+ }
+
+ ake_data->msg_id = HDCP_2_2_AKE_INIT;
+ ake_data->tx_caps = session_init_out.tx_caps;
+ memcpy(ake_data->r_tx, session_init_out.r_tx, HDCP_2_2_RTX_LEN);
+
+ return 0;
+}
+
+/**
+ * mei_hdcp_verify_receiver_cert_prepare_km() - Verify the Receiver Certificate
+ * AKE_Send_Cert and prepare AKE_Stored_Km/AKE_No_Stored_Km
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @rx_cert: AKE_Send_Cert for verification
+ * @km_stored: Pairing status flag output
+ * @ek_pub_km: AKE_Stored_Km/AKE_No_Stored_Km output msg
+ * @msg_sz : size of AKE_XXXXX_Km output msg
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int
+mei_hdcp_verify_receiver_cert_prepare_km(struct device *dev,
+ struct hdcp_port_data *data,
+ struct hdcp2_ake_send_cert *rx_cert,
+ bool *km_stored,
+ struct hdcp2_ake_no_stored_km
+ *ek_pub_km,
+ size_t *msg_sz)
+{
+ struct wired_cmd_verify_receiver_cert_in verify_rxcert_in = { { 0 } };
+ struct wired_cmd_verify_receiver_cert_out verify_rxcert_out = { { 0 } };
+ struct mei_cl_device *cldev;
+ ssize_t byte;
+
+ if (!dev || !data || !rx_cert || !km_stored || !ek_pub_km || !msg_sz)
+ return -EINVAL;
+
+ cldev = to_mei_cl_device(dev);
+
+ verify_rxcert_in.header.api_version = HDCP_API_VERSION;
+ verify_rxcert_in.header.command_id = WIRED_VERIFY_RECEIVER_CERT;
+ verify_rxcert_in.header.status = ME_HDCP_STATUS_SUCCESS;
+ verify_rxcert_in.header.buffer_len =
+ WIRED_CMD_BUF_LEN_VERIFY_RECEIVER_CERT_IN;
+
+ verify_rxcert_in.port.integrated_port_type = data->port_type;
+ verify_rxcert_in.port.physical_port = mei_get_ddi_index(data->port);
+
+ verify_rxcert_in.cert_rx = rx_cert->cert_rx;
+ memcpy(verify_rxcert_in.r_rx, &rx_cert->r_rx, HDCP_2_2_RRX_LEN);
+ memcpy(verify_rxcert_in.rx_caps, rx_cert->rx_caps, HDCP_2_2_RXCAPS_LEN);
+
+ byte = mei_cldev_send(cldev, (u8 *)&verify_rxcert_in,
+ sizeof(verify_rxcert_in));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_send failed: %zd\n", byte);
+ return byte;
+ }
+
+ byte = mei_cldev_recv(cldev, (u8 *)&verify_rxcert_out,
+ sizeof(verify_rxcert_out));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_recv failed: %zd\n", byte);
+ return byte;
+ }
+
+ if (verify_rxcert_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+ dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n",
+ WIRED_VERIFY_RECEIVER_CERT,
+ verify_rxcert_out.header.status);
+ return -EIO;
+ }
+
+ *km_stored = !!verify_rxcert_out.km_stored;
+ if (verify_rxcert_out.km_stored) {
+ ek_pub_km->msg_id = HDCP_2_2_AKE_STORED_KM;
+ *msg_sz = sizeof(struct hdcp2_ake_stored_km);
+ } else {
+ ek_pub_km->msg_id = HDCP_2_2_AKE_NO_STORED_KM;
+ *msg_sz = sizeof(struct hdcp2_ake_no_stored_km);
+ }
+
+ memcpy(ek_pub_km->e_kpub_km, &verify_rxcert_out.ekm_buff,
+ sizeof(verify_rxcert_out.ekm_buff));
+
+ return 0;
+}
+
+/**
+ * mei_hdcp_verify_hprime() - Verify AKE_Send_H_prime at ME FW.
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @rx_hprime: AKE_Send_H_prime msg for ME FW verification
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int
+mei_hdcp_verify_hprime(struct device *dev, struct hdcp_port_data *data,
+ struct hdcp2_ake_send_hprime *rx_hprime)
+{
+ struct wired_cmd_ake_send_hprime_in send_hprime_in = { { 0 } };
+ struct wired_cmd_ake_send_hprime_out send_hprime_out = { { 0 } };
+ struct mei_cl_device *cldev;
+ ssize_t byte;
+
+ if (!dev || !data || !rx_hprime)
+ return -EINVAL;
+
+ cldev = to_mei_cl_device(dev);
+
+ send_hprime_in.header.api_version = HDCP_API_VERSION;
+ send_hprime_in.header.command_id = WIRED_AKE_SEND_HPRIME;
+ send_hprime_in.header.status = ME_HDCP_STATUS_SUCCESS;
+ send_hprime_in.header.buffer_len = WIRED_CMD_BUF_LEN_AKE_SEND_HPRIME_IN;
+
+ send_hprime_in.port.integrated_port_type = data->port_type;
+ send_hprime_in.port.physical_port = mei_get_ddi_index(data->port);
+
+ memcpy(send_hprime_in.h_prime, rx_hprime->h_prime,
+ HDCP_2_2_H_PRIME_LEN);
+
+ byte = mei_cldev_send(cldev, (u8 *)&send_hprime_in,
+ sizeof(send_hprime_in));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+ return byte;
+ }
+
+ byte = mei_cldev_recv(cldev, (u8 *)&send_hprime_out,
+ sizeof(send_hprime_out));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+ return byte;
+ }
+
+ if (send_hprime_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+ dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n",
+ WIRED_AKE_SEND_HPRIME, send_hprime_out.header.status);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * mei_hdcp_store_pairing_info() - Store pairing info received at ME FW
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @pairing_info: AKE_Send_Pairing_Info msg input to ME FW
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int
+mei_hdcp_store_pairing_info(struct device *dev, struct hdcp_port_data *data,
+ struct hdcp2_ake_send_pairing_info *pairing_info)
+{
+ struct wired_cmd_ake_send_pairing_info_in pairing_info_in = { { 0 } };
+ struct wired_cmd_ake_send_pairing_info_out pairing_info_out = { { 0 } };
+ struct mei_cl_device *cldev;
+ ssize_t byte;
+
+ if (!dev || !data || !pairing_info)
+ return -EINVAL;
+
+ cldev = to_mei_cl_device(dev);
+
+ pairing_info_in.header.api_version = HDCP_API_VERSION;
+ pairing_info_in.header.command_id = WIRED_AKE_SEND_PAIRING_INFO;
+ pairing_info_in.header.status = ME_HDCP_STATUS_SUCCESS;
+ pairing_info_in.header.buffer_len =
+ WIRED_CMD_BUF_LEN_SEND_PAIRING_INFO_IN;
+
+ pairing_info_in.port.integrated_port_type = data->port_type;
+ pairing_info_in.port.physical_port = mei_get_ddi_index(data->port);
+
+ memcpy(pairing_info_in.e_kh_km, pairing_info->e_kh_km,
+ HDCP_2_2_E_KH_KM_LEN);
+
+ byte = mei_cldev_send(cldev, (u8 *)&pairing_info_in,
+ sizeof(pairing_info_in));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+ return byte;
+ }
+
+ byte = mei_cldev_recv(cldev, (u8 *)&pairing_info_out,
+ sizeof(pairing_info_out));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+ return byte;
+ }
+
+ if (pairing_info_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+ dev_dbg(dev, "ME cmd 0x%08X failed. Status: 0x%X\n",
+ WIRED_AKE_SEND_PAIRING_INFO,
+ pairing_info_out.header.status);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * mei_hdcp_initiate_locality_check() - Prepare LC_Init
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @lc_init_data: LC_Init msg output
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int
+mei_hdcp_initiate_locality_check(struct device *dev,
+ struct hdcp_port_data *data,
+ struct hdcp2_lc_init *lc_init_data)
+{
+ struct wired_cmd_init_locality_check_in lc_init_in = { { 0 } };
+ struct wired_cmd_init_locality_check_out lc_init_out = { { 0 } };
+ struct mei_cl_device *cldev;
+ ssize_t byte;
+
+ if (!dev || !data || !lc_init_data)
+ return -EINVAL;
+
+ cldev = to_mei_cl_device(dev);
+
+ lc_init_in.header.api_version = HDCP_API_VERSION;
+ lc_init_in.header.command_id = WIRED_INIT_LOCALITY_CHECK;
+ lc_init_in.header.status = ME_HDCP_STATUS_SUCCESS;
+ lc_init_in.header.buffer_len = WIRED_CMD_BUF_LEN_INIT_LOCALITY_CHECK_IN;
+
+ lc_init_in.port.integrated_port_type = data->port_type;
+ lc_init_in.port.physical_port = mei_get_ddi_index(data->port);
+
+ byte = mei_cldev_send(cldev, (u8 *)&lc_init_in, sizeof(lc_init_in));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+ return byte;
+ }
+
+ byte = mei_cldev_recv(cldev, (u8 *)&lc_init_out, sizeof(lc_init_out));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+ return byte;
+ }
+
+ if (lc_init_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+ dev_dbg(dev, "ME cmd 0x%08X Failed. status: 0x%X\n",
+ WIRED_INIT_LOCALITY_CHECK, lc_init_out.header.status);
+ return -EIO;
+ }
+
+ lc_init_data->msg_id = HDCP_2_2_LC_INIT;
+ memcpy(lc_init_data->r_n, lc_init_out.r_n, HDCP_2_2_RN_LEN);
+
+ return 0;
+}
+
+/**
+ * mei_hdcp_verify_lprime() - Verify lprime.
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @rx_lprime: LC_Send_L_prime msg for ME FW verification
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int
+mei_hdcp_verify_lprime(struct device *dev, struct hdcp_port_data *data,
+ struct hdcp2_lc_send_lprime *rx_lprime)
+{
+ struct wired_cmd_validate_locality_in verify_lprime_in = { { 0 } };
+ struct wired_cmd_validate_locality_out verify_lprime_out = { { 0 } };
+ struct mei_cl_device *cldev;
+ ssize_t byte;
+
+ if (!dev || !data || !rx_lprime)
+ return -EINVAL;
+
+ cldev = to_mei_cl_device(dev);
+
+ verify_lprime_in.header.api_version = HDCP_API_VERSION;
+ verify_lprime_in.header.command_id = WIRED_VALIDATE_LOCALITY;
+ verify_lprime_in.header.status = ME_HDCP_STATUS_SUCCESS;
+ verify_lprime_in.header.buffer_len =
+ WIRED_CMD_BUF_LEN_VALIDATE_LOCALITY_IN;
+
+ verify_lprime_in.port.integrated_port_type = data->port_type;
+ verify_lprime_in.port.physical_port = mei_get_ddi_index(data->port);
+
+ memcpy(verify_lprime_in.l_prime, rx_lprime->l_prime,
+ HDCP_2_2_L_PRIME_LEN);
+
+ byte = mei_cldev_send(cldev, (u8 *)&verify_lprime_in,
+ sizeof(verify_lprime_in));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+ return byte;
+ }
+
+ byte = mei_cldev_recv(cldev, (u8 *)&verify_lprime_out,
+ sizeof(verify_lprime_out));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+ return byte;
+ }
+
+ if (verify_lprime_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+ dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n",
+ WIRED_VALIDATE_LOCALITY,
+ verify_lprime_out.header.status);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * mei_hdcp_get_session_key() - Prepare SKE_Send_Eks.
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @ske_data: SKE_Send_Eks msg output from ME FW.
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int mei_hdcp_get_session_key(struct device *dev,
+ struct hdcp_port_data *data,
+ struct hdcp2_ske_send_eks *ske_data)
+{
+ struct wired_cmd_get_session_key_in get_skey_in = { { 0 } };
+ struct wired_cmd_get_session_key_out get_skey_out = { { 0 } };
+ struct mei_cl_device *cldev;
+ ssize_t byte;
+
+ if (!dev || !data || !ske_data)
+ return -EINVAL;
+
+ cldev = to_mei_cl_device(dev);
+
+ get_skey_in.header.api_version = HDCP_API_VERSION;
+ get_skey_in.header.command_id = WIRED_GET_SESSION_KEY;
+ get_skey_in.header.status = ME_HDCP_STATUS_SUCCESS;
+ get_skey_in.header.buffer_len = WIRED_CMD_BUF_LEN_GET_SESSION_KEY_IN;
+
+ get_skey_in.port.integrated_port_type = data->port_type;
+ get_skey_in.port.physical_port = mei_get_ddi_index(data->port);
+
+ byte = mei_cldev_send(cldev, (u8 *)&get_skey_in, sizeof(get_skey_in));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+ return byte;
+ }
+
+ byte = mei_cldev_recv(cldev, (u8 *)&get_skey_out, sizeof(get_skey_out));
+
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+ return byte;
+ }
+
+ if (get_skey_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+ dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n",
+ WIRED_GET_SESSION_KEY, get_skey_out.header.status);
+ return -EIO;
+ }
+
+ ske_data->msg_id = HDCP_2_2_SKE_SEND_EKS;
+ memcpy(ske_data->e_dkey_ks, get_skey_out.e_dkey_ks,
+ HDCP_2_2_E_DKEY_KS_LEN);
+ memcpy(ske_data->riv, get_skey_out.r_iv, HDCP_2_2_RIV_LEN);
+
+ return 0;
+}
+
+/**
+ * mei_hdcp_repeater_check_flow_prepare_ack() - Validate the Downstream topology
+ * and prepare rep_ack.
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @rep_topology: Receiver ID List to be validated
+ * @rep_send_ack : repeater ack from ME FW.
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int
+mei_hdcp_repeater_check_flow_prepare_ack(struct device *dev,
+ struct hdcp_port_data *data,
+ struct hdcp2_rep_send_receiverid_list
+ *rep_topology,
+ struct hdcp2_rep_send_ack
+ *rep_send_ack)
+{
+ struct wired_cmd_verify_repeater_in verify_repeater_in = { { 0 } };
+ struct wired_cmd_verify_repeater_out verify_repeater_out = { { 0 } };
+ struct mei_cl_device *cldev;
+ ssize_t byte;
+
+ if (!dev || !rep_topology || !rep_send_ack || !data)
+ return -EINVAL;
+
+ cldev = to_mei_cl_device(dev);
+
+ verify_repeater_in.header.api_version = HDCP_API_VERSION;
+ verify_repeater_in.header.command_id = WIRED_VERIFY_REPEATER;
+ verify_repeater_in.header.status = ME_HDCP_STATUS_SUCCESS;
+ verify_repeater_in.header.buffer_len =
+ WIRED_CMD_BUF_LEN_VERIFY_REPEATER_IN;
+
+ verify_repeater_in.port.integrated_port_type = data->port_type;
+ verify_repeater_in.port.physical_port = mei_get_ddi_index(data->port);
+
+ memcpy(verify_repeater_in.rx_info, rep_topology->rx_info,
+ HDCP_2_2_RXINFO_LEN);
+ memcpy(verify_repeater_in.seq_num_v, rep_topology->seq_num_v,
+ HDCP_2_2_SEQ_NUM_LEN);
+ memcpy(verify_repeater_in.v_prime, rep_topology->v_prime,
+ HDCP_2_2_V_PRIME_HALF_LEN);
+ memcpy(verify_repeater_in.receiver_ids, rep_topology->receiver_ids,
+ HDCP_2_2_RECEIVER_IDS_MAX_LEN);
+
+ byte = mei_cldev_send(cldev, (u8 *)&verify_repeater_in,
+ sizeof(verify_repeater_in));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+ return byte;
+ }
+
+ byte = mei_cldev_recv(cldev, (u8 *)&verify_repeater_out,
+ sizeof(verify_repeater_out));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+ return byte;
+ }
+
+ if (verify_repeater_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+ dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n",
+ WIRED_VERIFY_REPEATER,
+ verify_repeater_out.header.status);
+ return -EIO;
+ }
+
+ memcpy(rep_send_ack->v, verify_repeater_out.v,
+ HDCP_2_2_V_PRIME_HALF_LEN);
+ rep_send_ack->msg_id = HDCP_2_2_REP_SEND_ACK;
+
+ return 0;
+}
+
+/**
+ * mei_hdcp_verify_mprime() - Verify mprime.
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @stream_ready: RepeaterAuth_Stream_Ready msg for ME FW verification.
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int mei_hdcp_verify_mprime(struct device *dev,
+ struct hdcp_port_data *data,
+ struct hdcp2_rep_stream_ready *stream_ready)
+{
+ struct wired_cmd_repeater_auth_stream_req_in
+ verify_mprime_in = { { 0 } };
+ struct wired_cmd_repeater_auth_stream_req_out
+ verify_mprime_out = { { 0 } };
+ struct mei_cl_device *cldev;
+ ssize_t byte;
+
+ if (!dev || !stream_ready || !data)
+ return -EINVAL;
+
+ cldev = to_mei_cl_device(dev);
+
+ verify_mprime_in.header.api_version = HDCP_API_VERSION;
+ verify_mprime_in.header.command_id = WIRED_REPEATER_AUTH_STREAM_REQ;
+ verify_mprime_in.header.status = ME_HDCP_STATUS_SUCCESS;
+ verify_mprime_in.header.buffer_len =
+ WIRED_CMD_BUF_LEN_REPEATER_AUTH_STREAM_REQ_MIN_IN;
+
+ verify_mprime_in.port.integrated_port_type = data->port_type;
+ verify_mprime_in.port.physical_port = mei_get_ddi_index(data->port);
+
+ memcpy(verify_mprime_in.m_prime, stream_ready->m_prime,
+ HDCP_2_2_MPRIME_LEN);
+ drm_hdcp2_u32_to_seq_num(verify_mprime_in.seq_num_m, data->seq_num_m);
+ memcpy(verify_mprime_in.streams, data->streams,
+ (data->k * sizeof(struct hdcp2_streamid_type)));
+
+ verify_mprime_in.k = cpu_to_be16(data->k);
+
+ byte = mei_cldev_send(cldev, (u8 *)&verify_mprime_in,
+ sizeof(verify_mprime_in));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+ return byte;
+ }
+
+ byte = mei_cldev_recv(cldev, (u8 *)&verify_mprime_out,
+ sizeof(verify_mprime_out));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+ return byte;
+ }
+
+ if (verify_mprime_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+ dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n",
+ WIRED_REPEATER_AUTH_STREAM_REQ,
+ verify_mprime_out.header.status);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * mei_hdcp_enable_authentication() - Mark a port as authenticated
+ * through ME FW
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int mei_hdcp_enable_authentication(struct device *dev,
+ struct hdcp_port_data *data)
+{
+ struct wired_cmd_enable_auth_in enable_auth_in = { { 0 } };
+ struct wired_cmd_enable_auth_out enable_auth_out = { { 0 } };
+ struct mei_cl_device *cldev;
+ ssize_t byte;
+
+ if (!dev || !data)
+ return -EINVAL;
+
+ cldev = to_mei_cl_device(dev);
+
+ enable_auth_in.header.api_version = HDCP_API_VERSION;
+ enable_auth_in.header.command_id = WIRED_ENABLE_AUTH;
+ enable_auth_in.header.status = ME_HDCP_STATUS_SUCCESS;
+ enable_auth_in.header.buffer_len = WIRED_CMD_BUF_LEN_ENABLE_AUTH_IN;
+
+ enable_auth_in.port.integrated_port_type = data->port_type;
+ enable_auth_in.port.physical_port = mei_get_ddi_index(data->port);
+ enable_auth_in.stream_type = data->streams[0].stream_type;
+
+ byte = mei_cldev_send(cldev, (u8 *)&enable_auth_in,
+ sizeof(enable_auth_in));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+ return byte;
+ }
+
+ byte = mei_cldev_recv(cldev, (u8 *)&enable_auth_out,
+ sizeof(enable_auth_out));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+ return byte;
+ }
+
+ if (enable_auth_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+ dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n",
+ WIRED_ENABLE_AUTH, enable_auth_out.header.status);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * mei_hdcp_close_session() - Close the Wired HDCP Tx session of ME FW per port.
+ * This also disables the authenticated state of the port.
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int
+mei_hdcp_close_session(struct device *dev, struct hdcp_port_data *data)
+{
+ struct wired_cmd_close_session_in session_close_in = { { 0 } };
+ struct wired_cmd_close_session_out session_close_out = { { 0 } };
+ struct mei_cl_device *cldev;
+ ssize_t byte;
+
+ if (!dev || !data)
+ return -EINVAL;
+
+ cldev = to_mei_cl_device(dev);
+
+ session_close_in.header.api_version = HDCP_API_VERSION;
+ session_close_in.header.command_id = WIRED_CLOSE_SESSION;
+ session_close_in.header.status = ME_HDCP_STATUS_SUCCESS;
+ session_close_in.header.buffer_len =
+ WIRED_CMD_BUF_LEN_CLOSE_SESSION_IN;
+
+ session_close_in.port.integrated_port_type = data->port_type;
+ session_close_in.port.physical_port = mei_get_ddi_index(data->port);
+
+ byte = mei_cldev_send(cldev, (u8 *)&session_close_in,
+ sizeof(session_close_in));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+ return byte;
+ }
+
+ byte = mei_cldev_recv(cldev, (u8 *)&session_close_out,
+ sizeof(session_close_out));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+ return byte;
+ }
+
+ if (session_close_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+ dev_dbg(dev, "Session Close Failed. status: 0x%X\n",
+ session_close_out.header.status);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static const struct i915_hdcp_component_ops mei_hdcp_ops = {
+ .owner = THIS_MODULE,
+ .initiate_hdcp2_session = mei_hdcp_initiate_session,
+ .verify_receiver_cert_prepare_km =
+ mei_hdcp_verify_receiver_cert_prepare_km,
+ .verify_hprime = mei_hdcp_verify_hprime,
+ .store_pairing_info = mei_hdcp_store_pairing_info,
+ .initiate_locality_check = mei_hdcp_initiate_locality_check,
+ .verify_lprime = mei_hdcp_verify_lprime,
+ .get_session_key = mei_hdcp_get_session_key,
+ .repeater_check_flow_prepare_ack =
+ mei_hdcp_repeater_check_flow_prepare_ack,
+ .verify_mprime = mei_hdcp_verify_mprime,
+ .enable_hdcp_authentication = mei_hdcp_enable_authentication,
+ .close_hdcp_session = mei_hdcp_close_session,
+};
+
+static int mei_component_master_bind(struct device *dev)
+{
+ struct mei_cl_device *cldev = to_mei_cl_device(dev);
+ struct i915_hdcp_comp_master *comp_master =
+ mei_cldev_get_drvdata(cldev);
+ int ret;
+
+ dev_dbg(dev, "%s\n", __func__);
+ comp_master->ops = &mei_hdcp_ops;
+ comp_master->mei_dev = dev;
+ ret = component_bind_all(dev, comp_master);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static void mei_component_master_unbind(struct device *dev)
+{
+ struct mei_cl_device *cldev = to_mei_cl_device(dev);
+ struct i915_hdcp_comp_master *comp_master =
+ mei_cldev_get_drvdata(cldev);
+
+ dev_dbg(dev, "%s\n", __func__);
+ component_unbind_all(dev, comp_master);
+}
+
+static const struct component_master_ops mei_component_master_ops = {
+ .bind = mei_component_master_bind,
+ .unbind = mei_component_master_unbind,
+};
+
+static int mei_hdcp_component_match(struct device *dev, int subcomponent,
+ void *data)
+{
+ return !strcmp(dev->driver->name, "i915") &&
+ subcomponent == I915_COMPONENT_HDCP;
+}
+
+static int mei_hdcp_probe(struct mei_cl_device *cldev,
+ const struct mei_cl_device_id *id)
+{
+ struct i915_hdcp_comp_master *comp_master;
+ struct component_match *master_match;
+ int ret;
+
+ ret = mei_cldev_enable(cldev);
+ if (ret < 0) {
+ dev_err(&cldev->dev, "mei_cldev_enable Failed. %d\n", ret);
+ goto enable_err_exit;
+ }
+
+ comp_master = kzalloc(sizeof(*comp_master), GFP_KERNEL);
+ if (!comp_master) {
+ ret = -ENOMEM;
+ goto err_exit;
+ }
+
+ master_match = NULL;
+ component_match_add_typed(&cldev->dev, &master_match,
+ mei_hdcp_component_match, comp_master);
+ if (IS_ERR_OR_NULL(master_match)) {
+ ret = -ENOMEM;
+ goto err_exit;
+ }
+
+ mei_cldev_set_drvdata(cldev, comp_master);
+ ret = component_master_add_with_match(&cldev->dev,
+ &mei_component_master_ops,
+ master_match);
+ if (ret < 0) {
+ dev_err(&cldev->dev, "Master comp add failed %d\n", ret);
+ goto err_exit;
+ }
+
+ return 0;
+
+err_exit:
+ mei_cldev_set_drvdata(cldev, NULL);
+ kfree(comp_master);
+ mei_cldev_disable(cldev);
+enable_err_exit:
+ return ret;
+}
+
+static int mei_hdcp_remove(struct mei_cl_device *cldev)
+{
+ struct i915_hdcp_comp_master *comp_master =
+ mei_cldev_get_drvdata(cldev);
+
+ component_master_del(&cldev->dev, &mei_component_master_ops);
+ kfree(comp_master);
+ mei_cldev_set_drvdata(cldev, NULL);
+
+ return mei_cldev_disable(cldev);
+}
+
+#define MEI_UUID_HDCP GUID_INIT(0xB638AB7E, 0x94E2, 0x4EA2, 0xA5, \
+ 0x52, 0xD1, 0xC5, 0x4B, 0x62, 0x7F, 0x04)
+
+static struct mei_cl_device_id mei_hdcp_tbl[] = {
+ { .uuid = MEI_UUID_HDCP, .version = MEI_CL_VERSION_ANY },
+ { }
+};
+MODULE_DEVICE_TABLE(mei, mei_hdcp_tbl);
+
+static struct mei_cl_driver mei_hdcp_driver = {
+ .id_table = mei_hdcp_tbl,
+ .name = KBUILD_MODNAME,
+ .probe = mei_hdcp_probe,
+ .remove = mei_hdcp_remove,
+};
+
+module_mei_cl_driver(mei_hdcp_driver);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MEI HDCP");
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0+) */
+/*
+ * Copyright © 2019 Intel Corporation
+ *
+ * Authors:
+ * Ramalingam C <ramalingam.c@intel.com>
+ */
+
+#ifndef __MEI_HDCP_H__
+#define __MEI_HDCP_H__
+
+#include <drm/drm_hdcp.h>
+
+/* me_hdcp_status: Enumeration of all HDCP Status Codes */
+enum me_hdcp_status {
+ ME_HDCP_STATUS_SUCCESS = 0x0000,
+
+ /* WiDi Generic Status Codes */
+ ME_HDCP_STATUS_INTERNAL_ERROR = 0x1000,
+ ME_HDCP_STATUS_UNKNOWN_ERROR = 0x1001,
+ ME_HDCP_STATUS_INCORRECT_API_VERSION = 0x1002,
+ ME_HDCP_STATUS_INVALID_FUNCTION = 0x1003,
+ ME_HDCP_STATUS_INVALID_BUFFER_LENGTH = 0x1004,
+ ME_HDCP_STATUS_INVALID_PARAMS = 0x1005,
+ ME_HDCP_STATUS_AUTHENTICATION_FAILED = 0x1006,
+
+ /* WiDi Status Codes */
+ ME_HDCP_INVALID_SESSION_STATE = 0x6000,
+ ME_HDCP_SRM_FRAGMENT_UNEXPECTED = 0x6001,
+ ME_HDCP_SRM_INVALID_LENGTH = 0x6002,
+ ME_HDCP_SRM_FRAGMENT_OFFSET_INVALID = 0x6003,
+ ME_HDCP_SRM_VERIFICATION_FAILED = 0x6004,
+ ME_HDCP_SRM_VERSION_TOO_OLD = 0x6005,
+ ME_HDCP_RX_CERT_VERIFICATION_FAILED = 0x6006,
+ ME_HDCP_RX_REVOKED = 0x6007,
+ ME_HDCP_H_VERIFICATION_FAILED = 0x6008,
+ ME_HDCP_REPEATER_CHECK_UNEXPECTED = 0x6009,
+ ME_HDCP_TOPOLOGY_MAX_EXCEEDED = 0x600A,
+ ME_HDCP_V_VERIFICATION_FAILED = 0x600B,
+ ME_HDCP_L_VERIFICATION_FAILED = 0x600C,
+ ME_HDCP_STREAM_KEY_ALLOC_FAILED = 0x600D,
+ ME_HDCP_BASE_KEY_RESET_FAILED = 0x600E,
+ ME_HDCP_NONCE_GENERATION_FAILED = 0x600F,
+ ME_HDCP_STATUS_INVALID_E_KEY_STATE = 0x6010,
+ ME_HDCP_STATUS_INVALID_CS_ICV = 0x6011,
+ ME_HDCP_STATUS_INVALID_KB_KEY_STATE = 0x6012,
+ ME_HDCP_STATUS_INVALID_PAVP_MODE_ICV = 0x6013,
+ ME_HDCP_STATUS_INVALID_PAVP_MODE = 0x6014,
+ ME_HDCP_STATUS_LC_MAX_ATTEMPTS = 0x6015,
+
+ /* New status for HDCP 2.1 */
+ ME_HDCP_STATUS_MISMATCH_IN_M = 0x6016,
+
+ /* New status code for HDCP 2.2 Rx */
+ ME_HDCP_STATUS_RX_PROV_NOT_ALLOWED = 0x6017,
+ ME_HDCP_STATUS_RX_PROV_WRONG_SUBJECT = 0x6018,
+ ME_HDCP_RX_NEEDS_PROVISIONING = 0x6019,
+ ME_HDCP_BKSV_ICV_AUTH_FAILED = 0x6020,
+ ME_HDCP_STATUS_INVALID_STREAM_ID = 0x6021,
+ ME_HDCP_STATUS_CHAIN_NOT_INITIALIZED = 0x6022,
+ ME_HDCP_FAIL_NOT_EXPECTED = 0x6023,
+ ME_HDCP_FAIL_HDCP_OFF = 0x6024,
+ ME_HDCP_FAIL_INVALID_PAVP_MEMORY_MODE = 0x6025,
+ ME_HDCP_FAIL_AES_ECB_FAILURE = 0x6026,
+ ME_HDCP_FEATURE_NOT_SUPPORTED = 0x6027,
+ ME_HDCP_DMA_READ_ERROR = 0x6028,
+ ME_HDCP_DMA_WRITE_ERROR = 0x6029,
+ ME_HDCP_FAIL_INVALID_PACKET_SIZE = 0x6030,
+ ME_HDCP_H264_PARSING_ERROR = 0x6031,
+ ME_HDCP_HDCP2_ERRATA_VIDEO_VIOLATION = 0x6032,
+ ME_HDCP_HDCP2_ERRATA_AUDIO_VIOLATION = 0x6033,
+ ME_HDCP_TX_ACTIVE_ERROR = 0x6034,
+ ME_HDCP_MODE_CHANGE_ERROR = 0x6035,
+ ME_HDCP_STREAM_TYPE_ERROR = 0x6036,
+ ME_HDCP_STREAM_MANAGE_NOT_POSSIBLE = 0x6037,
+
+ ME_HDCP_STATUS_PORT_INVALID_COMMAND = 0x6038,
+ ME_HDCP_STATUS_UNSUPPORTED_PROTOCOL = 0x6039,
+ ME_HDCP_STATUS_INVALID_PORT_INDEX = 0x603a,
+ ME_HDCP_STATUS_TX_AUTH_NEEDED = 0x603b,
+ ME_HDCP_STATUS_NOT_INTEGRATED_PORT = 0x603c,
+ ME_HDCP_STATUS_SESSION_MAX_REACHED = 0x603d,
+
+ /* hdcp capable bit is not set in rx_caps(error is unique to DP) */
+ ME_HDCP_STATUS_NOT_HDCP_CAPABLE = 0x6041,
+
+ ME_HDCP_STATUS_INVALID_STREAM_COUNT = 0x6042,
+};
+
+#define HDCP_API_VERSION 0x00010000
+
+#define HDCP_M_LEN 16
+#define HDCP_KH_LEN 16
+
+/* Payload Buffer size(Excluding Header) for CMDs and corresponding response */
+/* Wired_Tx_AKE */
+#define WIRED_CMD_BUF_LEN_INITIATE_HDCP2_SESSION_IN (4 + 1)
+#define WIRED_CMD_BUF_LEN_INITIATE_HDCP2_SESSION_OUT (4 + 8 + 3)
+
+#define WIRED_CMD_BUF_LEN_VERIFY_RECEIVER_CERT_IN (4 + 522 + 8 + 3)
+#define WIRED_CMD_BUF_LEN_VERIFY_RECEIVER_CERT_MIN_OUT (4 + 1 + 3 + 16 + 16)
+#define WIRED_CMD_BUF_LEN_VERIFY_RECEIVER_CERT_MAX_OUT (4 + 1 + 3 + 128)
+
+#define WIRED_CMD_BUF_LEN_AKE_SEND_HPRIME_IN (4 + 32)
+#define WIRED_CMD_BUF_LEN_AKE_SEND_HPRIME_OUT (4)
+
+#define WIRED_CMD_BUF_LEN_SEND_PAIRING_INFO_IN (4 + 16)
+#define WIRED_CMD_BUF_LEN_SEND_PAIRING_INFO_OUT (4)
+
+#define WIRED_CMD_BUF_LEN_CLOSE_SESSION_IN (4)
+#define WIRED_CMD_BUF_LEN_CLOSE_SESSION_OUT (4)
+
+/* Wired_Tx_LC */
+#define WIRED_CMD_BUF_LEN_INIT_LOCALITY_CHECK_IN (4)
+#define WIRED_CMD_BUF_LEN_INIT_LOCALITY_CHECK_OUT (4 + 8)
+
+#define WIRED_CMD_BUF_LEN_VALIDATE_LOCALITY_IN (4 + 32)
+#define WIRED_CMD_BUF_LEN_VALIDATE_LOCALITY_OUT (4)
+
+/* Wired_Tx_SKE */
+#define WIRED_CMD_BUF_LEN_GET_SESSION_KEY_IN (4)
+#define WIRED_CMD_BUF_LEN_GET_SESSION_KEY_OUT (4 + 16 + 8)
+
+/* Wired_Tx_SKE */
+#define WIRED_CMD_BUF_LEN_ENABLE_AUTH_IN (4 + 1)
+#define WIRED_CMD_BUF_LEN_ENABLE_AUTH_OUT (4)
+
+/* Wired_Tx_Repeater */
+#define WIRED_CMD_BUF_LEN_VERIFY_REPEATER_IN (4 + 2 + 3 + 16 + 155)
+#define WIRED_CMD_BUF_LEN_VERIFY_REPEATER_OUT (4 + 1 + 16)
+
+#define WIRED_CMD_BUF_LEN_REPEATER_AUTH_STREAM_REQ_MIN_IN (4 + 3 + \
+ 32 + 2 + 2)
+
+#define WIRED_CMD_BUF_LEN_REPEATER_AUTH_STREAM_REQ_OUT (4)
+
+/* hdcp_command_id: Enumeration of all WIRED HDCP Command IDs */
+enum hdcp_command_id {
+ _WIDI_COMMAND_BASE = 0x00030000,
+ WIDI_INITIATE_HDCP2_SESSION = _WIDI_COMMAND_BASE,
+ HDCP_GET_SRM_STATUS,
+ HDCP_SEND_SRM_FRAGMENT,
+
+ /* The wired HDCP Tx commands */
+ _WIRED_COMMAND_BASE = 0x00031000,
+ WIRED_INITIATE_HDCP2_SESSION = _WIRED_COMMAND_BASE,
+ WIRED_VERIFY_RECEIVER_CERT,
+ WIRED_AKE_SEND_HPRIME,
+ WIRED_AKE_SEND_PAIRING_INFO,
+ WIRED_INIT_LOCALITY_CHECK,
+ WIRED_VALIDATE_LOCALITY,
+ WIRED_GET_SESSION_KEY,
+ WIRED_ENABLE_AUTH,
+ WIRED_VERIFY_REPEATER,
+ WIRED_REPEATER_AUTH_STREAM_REQ,
+ WIRED_CLOSE_SESSION,
+
+ _WIRED_COMMANDS_COUNT,
+};
+
+union encrypted_buff {
+ u8 e_kpub_km[HDCP_2_2_E_KPUB_KM_LEN];
+ u8 e_kh_km_m[HDCP_2_2_E_KH_KM_M_LEN];
+ struct {
+ u8 e_kh_km[HDCP_KH_LEN];
+ u8 m[HDCP_M_LEN];
+ } __packed;
+};
+
+/* HDCP HECI message header. All header values are little endian. */
+struct hdcp_cmd_header {
+ u32 api_version;
+ u32 command_id;
+ enum me_hdcp_status status;
+ /* Length of the HECI message (excluding the header) */
+ u32 buffer_len;
+} __packed;
+
+/* Empty command request or response. No data follows the header. */
+struct hdcp_cmd_no_data {
+ struct hdcp_cmd_header header;
+} __packed;
+
+/* Uniquely identifies the hdcp port being addressed for a given command. */
+struct hdcp_port_id {
+ u8 integrated_port_type;
+ u8 physical_port;
+ u16 reserved;
+} __packed;
+
+/*
+ * Data structures for integrated wired HDCP2 Tx in
+ * support of the AKE protocol
+ */
+/* HECI struct for integrated wired HDCP Tx session initiation. */
+struct wired_cmd_initiate_hdcp2_session_in {
+ struct hdcp_cmd_header header;
+ struct hdcp_port_id port;
+ u8 protocol; /* for HDMI vs DP */
+} __packed;
+
+struct wired_cmd_initiate_hdcp2_session_out {
+ struct hdcp_cmd_header header;
+ struct hdcp_port_id port;
+ u8 r_tx[HDCP_2_2_RTX_LEN];
+ struct hdcp2_tx_caps tx_caps;
+} __packed;
+
+/* HECI struct for ending an integrated wired HDCP Tx session. */
+struct wired_cmd_close_session_in {
+ struct hdcp_cmd_header header;
+ struct hdcp_port_id port;
+} __packed;
+
+struct wired_cmd_close_session_out {
+ struct hdcp_cmd_header header;
+ struct hdcp_port_id port;
+} __packed;
+
+/* HECI struct for integrated wired HDCP Tx Rx Cert verification. */
+struct wired_cmd_verify_receiver_cert_in {
+ struct hdcp_cmd_header header;
+ struct hdcp_port_id port;
+ struct hdcp2_cert_rx cert_rx;
+ u8 r_rx[HDCP_2_2_RRX_LEN];
+ u8 rx_caps[HDCP_2_2_RXCAPS_LEN];
+} __packed;
+
+struct wired_cmd_verify_receiver_cert_out {
+ struct hdcp_cmd_header header;
+ struct hdcp_port_id port;
+ u8 km_stored;
+ u8 reserved[3];
+ union encrypted_buff ekm_buff;
+} __packed;
+
+/* HECI struct for verification of Rx's Hprime in a HDCP Tx session */
+struct wired_cmd_ake_send_hprime_in {
+ struct hdcp_cmd_header header;
+ struct hdcp_port_id port;
+ u8 h_prime[HDCP_2_2_H_PRIME_LEN];
+} __packed;
+
+struct wired_cmd_ake_send_hprime_out {
+ struct hdcp_cmd_header header;
+ struct hdcp_port_id port;
+} __packed;
+
+/*
+ * HECI struct for sending in AKE pairing data generated by the Rx in an
+ * integrated wired HDCP Tx session.
+ */
+struct wired_cmd_ake_send_pairing_info_in {
+ struct hdcp_cmd_header header;
+ struct hdcp_port_id port;
+ u8 e_kh_km[HDCP_2_2_E_KH_KM_LEN];
+} __packed;
+
+struct wired_cmd_ake_send_pairing_info_out {
+ struct hdcp_cmd_header header;
+ struct hdcp_port_id port;
+} __packed;
+
+/* Data structures for integrated wired HDCP2 Tx in support of the LC protocol*/
+/*
+ * HECI struct for initiating locality check with an
+ * integrated wired HDCP Tx session.
+ */
+struct wired_cmd_init_locality_check_in {
+ struct hdcp_cmd_header header;
+ struct hdcp_port_id port;
+} __packed;
+
+struct wired_cmd_init_locality_check_out {
+ struct hdcp_cmd_header header;
+ struct hdcp_port_id port;
+ u8 r_n[HDCP_2_2_RN_LEN];
+} __packed;
+
+/*
+ * HECI struct for validating an Rx's LPrime value in an
+ * integrated wired HDCP Tx session.
+ */
+struct wired_cmd_validate_locality_in {
+ struct hdcp_cmd_header header;
+ struct hdcp_port_id port;
+ u8 l_prime[HDCP_2_2_L_PRIME_LEN];
+} __packed;
+
+struct wired_cmd_validate_locality_out {
+ struct hdcp_cmd_header header;
+ struct hdcp_port_id port;
+} __packed;
+
+/*
+ * Data structures for integrated wired HDCP2 Tx in support of the
+ * SKE protocol
+ */
+/* HECI struct for creating session key */
+struct wired_cmd_get_session_key_in {
+ struct hdcp_cmd_header header;
+ struct hdcp_port_id port;
+} __packed;
+
+struct wired_cmd_get_session_key_out {
+ struct hdcp_cmd_header header;
+ struct hdcp_port_id port;
+ u8 e_dkey_ks[HDCP_2_2_E_DKEY_KS_LEN];
+ u8 r_iv[HDCP_2_2_RIV_LEN];
+} __packed;
+
+/* HECI struct for the Tx enable authentication command */
+struct wired_cmd_enable_auth_in {
+ struct hdcp_cmd_header header;
+ struct hdcp_port_id port;
+ u8 stream_type;
+} __packed;
+
+struct wired_cmd_enable_auth_out {
+ struct hdcp_cmd_header header;
+ struct hdcp_port_id port;
+} __packed;
+
+/*
+ * Data structures for integrated wired HDCP2 Tx in support of
+ * the repeater protocols
+ */
+/*
+ * HECI struct for verifying the downstream repeater's HDCP topology in an
+ * integrated wired HDCP Tx session.
+ */
+struct wired_cmd_verify_repeater_in {
+ struct hdcp_cmd_header header;
+ struct hdcp_port_id port;
+ u8 rx_info[HDCP_2_2_RXINFO_LEN];
+ u8 seq_num_v[HDCP_2_2_SEQ_NUM_LEN];
+ u8 v_prime[HDCP_2_2_V_PRIME_HALF_LEN];
+ u8 receiver_ids[HDCP_2_2_RECEIVER_IDS_MAX_LEN];
+} __packed;
+
+struct wired_cmd_verify_repeater_out {
+ struct hdcp_cmd_header header;
+ struct hdcp_port_id port;
+ u8 content_type_supported;
+ u8 v[HDCP_2_2_V_PRIME_HALF_LEN];
+} __packed;
+
+/*
+ * HECI struct in support of stream management in an
+ * integrated wired HDCP Tx session.
+ */
+struct wired_cmd_repeater_auth_stream_req_in {
+ struct hdcp_cmd_header header;
+ struct hdcp_port_id port;
+ u8 seq_num_m[HDCP_2_2_SEQ_NUM_LEN];
+ u8 m_prime[HDCP_2_2_MPRIME_LEN];
+ __be16 k;
+ struct hdcp2_streamid_type streams[1];
+} __packed;
+
+struct wired_cmd_repeater_auth_stream_req_out {
+ struct hdcp_cmd_header header;
+ struct hdcp_port_id port;
+} __packed;
+
+enum mei_fw_ddi {
+ MEI_DDI_INVALID_PORT = 0x0,
+
+ MEI_DDI_B = 1,
+ MEI_DDI_C,
+ MEI_DDI_D,
+ MEI_DDI_E,
+ MEI_DDI_F,
+ MEI_DDI_A = 7,
+ MEI_DDI_RANGE_END = MEI_DDI_A,
+};
+#endif /* __MEI_HDCP_H__ */
#define _DRM_AUDIO_COMPONENT_H_
struct drm_audio_component;
+struct device;
/**
* struct drm_audio_component_ops - Ops implemented by DRM driver, called by hda driver
#define HDCP_2_2_HDMI_RXSTATUS_READY(x) ((x) & BIT(2))
#define HDCP_2_2_HDMI_RXSTATUS_REAUTH_REQ(x) ((x) & BIT(3))
+/*
+ * Helper functions to convert 24bit big endian hdcp sequence number to
+ * host format and back
+ */
+static inline
+u32 drm_hdcp2_seq_num_to_u32(u8 seq_num[HDCP_2_2_SEQ_NUM_LEN])
+{
+ return (u32)(seq_num[2] | seq_num[1] << 8 | seq_num[0] << 16);
+}
+
+static inline
+void drm_hdcp2_u32_to_seq_num(u8 seq_num[HDCP_2_2_SEQ_NUM_LEN], u32 val)
+{
+ seq_num[0] = val >> 16;
+ seq_num[1] = val >> 8;
+ seq_num[2] = val;
+}
+
#endif
#include "drm_audio_component.h"
+enum i915_component_type {
+ I915_COMPONENT_AUDIO = 1,
+ I915_COMPONENT_HDCP,
+};
+
/* MAX_PORT is the number of port
* It must be sync with I915_MAX_PORTS defined i915_drv.h
*/
#define INTEL_GEN11_BSM_DW1 0xc4
#define INTEL_BSM_MASK (-(1u << 20))
+enum port {
+ PORT_NONE = -1,
+
+ PORT_A = 0,
+ PORT_B,
+ PORT_C,
+ PORT_D,
+ PORT_E,
+ PORT_F,
+
+ I915_MAX_PORTS
+};
+
+#define port_name(p) ((p) + 'A')
+
#endif /* _I915_DRM_H_ */
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0+) */
+/*
+ * Copyright © 2017-2018 Intel Corporation
+ *
+ * Authors:
+ * Ramalingam C <ramalingam.c@intel.com>
+ */
+
+#ifndef _I915_MEI_HDCP_INTERFACE_H_
+#define _I915_MEI_HDCP_INTERFACE_H_
+
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <drm/drm_hdcp.h>
+#include <drm/i915_drm.h>
+
+/**
+ * enum hdcp_port_type - HDCP port implementation type defined by ME FW
+ * @HDCP_PORT_TYPE_INVALID: Invalid hdcp port type
+ * @HDCP_PORT_TYPE_INTEGRATED: In-Host HDCP2.x port
+ * @HDCP_PORT_TYPE_LSPCON: HDCP2.2 discrete wired Tx port with LSPCON
+ * (HDMI 2.0) solution
+ * @HDCP_PORT_TYPE_CPDP: HDCP2.2 discrete wired Tx port using the CPDP (DP 1.3)
+ * solution
+ */
+enum hdcp_port_type {
+ HDCP_PORT_TYPE_INVALID,
+ HDCP_PORT_TYPE_INTEGRATED,
+ HDCP_PORT_TYPE_LSPCON,
+ HDCP_PORT_TYPE_CPDP
+};
+
+/**
+ * enum hdcp_wired_protocol - HDCP adaptation used on the port
+ * @HDCP_PROTOCOL_INVALID: Invalid HDCP adaptation protocol
+ * @HDCP_PROTOCOL_HDMI: HDMI adaptation of HDCP used on the port
+ * @HDCP_PROTOCOL_DP: DP adaptation of HDCP used on the port
+ */
+enum hdcp_wired_protocol {
+ HDCP_PROTOCOL_INVALID,
+ HDCP_PROTOCOL_HDMI,
+ HDCP_PROTOCOL_DP
+};
+
+/**
+ * struct hdcp_port_data - intel specific HDCP port data
+ * @port: port index as per I915
+ * @port_type: HDCP port type as per ME FW classification
+ * @protocol: HDCP adaptation as per ME FW
+ * @k: No of streams transmitted on a port. Only on DP MST this is != 1
+ * @seq_num_m: Count of RepeaterAuth_Stream_Manage msg propagated.
+ * Initialized to 0 on AKE_INIT. Incremented after every successful
+ * transmission of RepeaterAuth_Stream_Manage message. When it rolls
+ * over re-Auth has to be triggered.
+ * @streams: struct hdcp2_streamid_type[k]. Defines the type and id for the
+ * streams
+ */
+struct hdcp_port_data {
+ enum port port;
+ u8 port_type;
+ u8 protocol;
+ u16 k;
+ u32 seq_num_m;
+ struct hdcp2_streamid_type *streams;
+};
+
+/**
+ * struct i915_hdcp_component_ops- ops for HDCP2.2 services.
+ * @owner: Module providing the ops
+ * @initiate_hdcp2_session: Initiate a Wired HDCP2.2 Tx Session.
+ * And Prepare AKE_Init.
+ * @verify_receiver_cert_prepare_km: Verify the Receiver Certificate
+ * AKE_Send_Cert and prepare
+ AKE_Stored_Km/AKE_No_Stored_Km
+ * @verify_hprime: Verify AKE_Send_H_prime
+ * @store_pairing_info: Store pairing info received
+ * @initiate_locality_check: Prepare LC_Init
+ * @verify_lprime: Verify lprime
+ * @get_session_key: Prepare SKE_Send_Eks
+ * @repeater_check_flow_prepare_ack: Validate the Downstream topology
+ * and prepare rep_ack
+ * @verify_mprime: Verify mprime
+ * @enable_hdcp_authentication: Mark a port as authenticated.
+ * @close_hdcp_session: Close the Wired HDCP Tx session per port.
+ * This also disables the authenticated state of the port.
+ */
+struct i915_hdcp_component_ops {
+ /**
+ * @owner: mei_hdcp module
+ */
+ struct module *owner;
+
+ int (*initiate_hdcp2_session)(struct device *dev,
+ struct hdcp_port_data *data,
+ struct hdcp2_ake_init *ake_data);
+ int (*verify_receiver_cert_prepare_km)(struct device *dev,
+ struct hdcp_port_data *data,
+ struct hdcp2_ake_send_cert
+ *rx_cert,
+ bool *km_stored,
+ struct hdcp2_ake_no_stored_km
+ *ek_pub_km,
+ size_t *msg_sz);
+ int (*verify_hprime)(struct device *dev,
+ struct hdcp_port_data *data,
+ struct hdcp2_ake_send_hprime *rx_hprime);
+ int (*store_pairing_info)(struct device *dev,
+ struct hdcp_port_data *data,
+ struct hdcp2_ake_send_pairing_info
+ *pairing_info);
+ int (*initiate_locality_check)(struct device *dev,
+ struct hdcp_port_data *data,
+ struct hdcp2_lc_init *lc_init_data);
+ int (*verify_lprime)(struct device *dev,
+ struct hdcp_port_data *data,
+ struct hdcp2_lc_send_lprime *rx_lprime);
+ int (*get_session_key)(struct device *dev,
+ struct hdcp_port_data *data,
+ struct hdcp2_ske_send_eks *ske_data);
+ int (*repeater_check_flow_prepare_ack)(struct device *dev,
+ struct hdcp_port_data *data,
+ struct hdcp2_rep_send_receiverid_list
+ *rep_topology,
+ struct hdcp2_rep_send_ack
+ *rep_send_ack);
+ int (*verify_mprime)(struct device *dev,
+ struct hdcp_port_data *data,
+ struct hdcp2_rep_stream_ready *stream_ready);
+ int (*enable_hdcp_authentication)(struct device *dev,
+ struct hdcp_port_data *data);
+ int (*close_hdcp_session)(struct device *dev,
+ struct hdcp_port_data *data);
+};
+
+/**
+ * struct i915_hdcp_component_master - Used for communication between i915
+ * and mei_hdcp drivers for the HDCP2.2 services
+ * @mei_dev: device that provide the HDCP2.2 service from MEI Bus.
+ * @hdcp_ops: Ops implemented by mei_hdcp driver, used by i915 driver.
+ */
+struct i915_hdcp_comp_master {
+ struct device *mei_dev;
+ const struct i915_hdcp_component_ops *ops;
+
+ /* To protect the above members. */
+ struct mutex mutex;
+};
+
+#endif /* _I915_MEI_HDCP_INTERFACE_H_ */
#include <linux/stddef.h>
+
struct device;
+/**
+ * struct component_ops - callbacks for component drivers
+ *
+ * Components are registered with component_add() and unregistered with
+ * component_del().
+ */
struct component_ops {
+ /**
+ * @bind:
+ *
+ * Called through component_bind_all() when the aggregate driver is
+ * ready to bind the overall driver.
+ */
int (*bind)(struct device *comp, struct device *master,
void *master_data);
+ /**
+ * @unbind:
+ *
+ * Called through component_unbind_all() when the aggregate driver is
+ * ready to bind the overall driver, or when component_bind_all() fails
+ * part-ways through and needs to unbind some already bound components.
+ */
void (*unbind)(struct device *comp, struct device *master,
void *master_data);
};
int component_add(struct device *, const struct component_ops *);
+int component_add_typed(struct device *dev, const struct component_ops *ops,
+ int subcomponent);
void component_del(struct device *, const struct component_ops *);
int component_bind_all(struct device *master, void *master_data);
struct master;
+/**
+ * struct component_master_ops - callback for the aggregate driver
+ *
+ * Aggregate drivers are registered with component_master_add_with_match() and
+ * unregistered with component_master_del().
+ */
struct component_master_ops {
+ /**
+ * @bind:
+ *
+ * Called when all components or the aggregate driver, as specified in
+ * the match list passed to component_master_add_with_match(), are
+ * ready. Usually there are 3 steps to bind an aggregate driver:
+ *
+ * 1. Allocate a structure for the aggregate driver.
+ *
+ * 2. Bind all components to the aggregate driver by calling
+ * component_bind_all() with the aggregate driver structure as opaque
+ * pointer data.
+ *
+ * 3. Register the aggregate driver with the subsystem to publish its
+ * interfaces.
+ *
+ * Note that the lifetime of the aggregate driver does not align with
+ * any of the underlying &struct device instances. Therefore devm cannot
+ * be used and all resources acquired or allocated in this callback must
+ * be explicitly released in the @unbind callback.
+ */
int (*bind)(struct device *master);
+ /**
+ * @unbind:
+ *
+ * Called when either the aggregate driver, using
+ * component_master_del(), or one of its components, using
+ * component_del(), is unregistered.
+ */
void (*unbind)(struct device *master);
};
struct component_match **matchptr,
void (*release)(struct device *, void *),
int (*compare)(struct device *, void *), void *compare_data);
+void component_match_add_typed(struct device *master,
+ struct component_match **matchptr,
+ int (*compare_typed)(struct device *, int, void *), void *compare_data);
+/**
+ * component_match_add - add a compent match
+ * @master: device with the aggregate driver
+ * @matchptr: pointer to the list of component matches
+ * @compare: compare function to match against all components
+ * @compare_data: opaque pointer passed to the @compare function
+ *
+ * Adds a new component match to the list stored in @matchptr, which the @master
+ * aggregate driver needs to function. The list of component matches pointed to
+ * by @matchptr must be initialized to NULL before adding the first match. This
+ * only matches against components added with component_add().
+ *
+ * The allocated match list in @matchptr is automatically released using devm
+ * actions.
+ *
+ * See also component_match_add_release() and component_match_add_typed().
+ */
static inline void component_match_add(struct device *master,
struct component_match **matchptr,
int (*compare)(struct device *, void *), void *compare_data)
bool *audio_enabled, char *buffer, int max_bytes);
int snd_hdac_acomp_init(struct hdac_bus *bus,
const struct drm_audio_component_audio_ops *aops,
- int (*match_master)(struct device *, void *),
+ int (*match_master)(struct device *, int, void *),
size_t extra_size);
int snd_hdac_acomp_exit(struct hdac_bus *bus);
int snd_hdac_acomp_register_notifier(struct hdac_bus *bus,
}
static inline int snd_hdac_acomp_init(struct hdac_bus *bus,
const struct drm_audio_component_audio_ops *aops,
- int (*match_master)(struct device *, void *),
+ int (*match_master)(struct device *,
+ int, void *),
size_t extra_size)
{
return -ENODEV;
*/
int snd_hdac_acomp_init(struct hdac_bus *bus,
const struct drm_audio_component_audio_ops *aops,
- int (*match_master)(struct device *, void *),
+ int (*match_master)(struct device *, int, void *),
size_t extra_size)
{
struct component_match *match = NULL;
bus->audio_component = acomp;
devres_add(dev, acomp);
- component_match_add(dev, &match, match_master, bus);
+ component_match_add_typed(dev, &match, match_master, bus);
ret = component_master_add_with_match(dev, &hdac_component_master_ops,
match);
if (ret < 0)
}
EXPORT_SYMBOL_GPL(snd_hdac_i915_set_bclk);
-static int i915_component_master_match(struct device *dev, void *data)
+static int i915_component_master_match(struct device *dev, int subcomponent,
+ void *data)
{
- return !strcmp(dev->driver->name, "i915");
+ return !strcmp(dev->driver->name, "i915") &&
+ subcomponent == I915_COMPONENT_AUDIO;
}
/* check whether intel graphics is present */
projects / linux.git / commitdiff