gpio: 104-idi-48: Implement get_multiple callback

The ACCES I/O 104-IDI-48 series of devices provides 48
optically-isolated inputs accessed via six 8-bit ports. Since eight
input lines are acquired on a single port input read, the 104-IDI-48
GPIO driver may improve multiple input reads by utilizing a get_multiple
callback. This patch implements the idi_48_gpio_get_multiple function
which serves as the respective get_multiple callback.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/drivers/gpio/gpio-104-idi-48.c b/drivers/gpio/gpio-104-idi-48.c
index add859d59766006d45a5d5153cf805feea17e4fc..f35632609379432440e9ca1df167f88dab1422a0 100644 (file)
--- a/drivers/gpio/gpio-104-idi-48.c
+++ b/drivers/gpio/gpio-104-idi-48.c
@@ -14,6 +14,7 @@
  * This driver supports the following ACCES devices: 104-IDI-48A,
  * 104-IDI-48AC, 104-IDI-48B, and 104-IDI-48BC.
  */
+#include <linux/bitmap.h>
 #include <linux/bitops.h>
 #include <linux/device.h>
 #include <linux/errno.h>
@@ -88,6 +89,51 @@ static int idi_48_gpio_get(struct gpio_chip *chip, unsigned offset)
        return 0;
 }
 
+static int idi_48_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
+       unsigned long *bits)
+{
+       struct idi_48_gpio *const idi48gpio = gpiochip_get_data(chip);
+       size_t i;
+       const size_t ports[] = { 0, 1, 2, 4, 5, 6 };
+       const unsigned int gpio_reg_size = 8;
+       unsigned int bits_offset;
+       size_t word_index;
+       unsigned int word_offset;
+       unsigned long word_mask;
+       const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0);
+       unsigned long port_state;
+
+       /* clear bits array to a clean slate */
+       bitmap_zero(bits, chip->ngpio);
+
+       /* get bits are evaluated a gpio port register at a time */
+       for (i = 0; i < ARRAY_SIZE(ports); i++) {
+               /* gpio offset in bits array */
+               bits_offset = i * gpio_reg_size;
+
+               /* word index for bits array */
+               word_index = BIT_WORD(bits_offset);
+
+               /* gpio offset within current word of bits array */
+               word_offset = bits_offset % BITS_PER_LONG;
+
+               /* mask of get bits for current gpio within current word */
+               word_mask = mask[word_index] & (port_mask << word_offset);
+               if (!word_mask) {
+                       /* no get bits in this port so skip to next one */
+                       continue;
+               }
+
+               /* read bits from current gpio port */
+               port_state = inb(idi48gpio->base + ports[i]);
+
+               /* store acquired bits at respective bits array offset */
+               bits[word_index] |= port_state << word_offset;
+       }
+
+       return 0;
+}
+
 static void idi_48_irq_ack(struct irq_data *data)
 {
 }
@@ -256,6 +302,7 @@ static int idi_48_probe(struct device *dev, unsigned int id)
        idi48gpio->chip.get_direction = idi_48_gpio_get_direction;
        idi48gpio->chip.direction_input = idi_48_gpio_direction_input;
        idi48gpio->chip.get = idi_48_gpio_get;
+       idi48gpio->chip.get_multiple = idi_48_gpio_get_multiple;
        idi48gpio->base = base[id];
 
        raw_spin_lock_init(&idi48gpio->lock);