ARM: dts: imx6*-hummingboard2: use proper gpio flags definitions

Use proper gpio flag definitions for GPIOs rather than using opaque
uninformative numbers.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
index b632eb73e85c1e0beaa4e732769ff38b5c239a0f..4723bb279e5768df84b44c084ffabbc53a506eeb 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
@@ -46,7 +46,7 @@ chosen {
 
        ir_recv: ir-receiver {
                compatible = "gpio-ir-receiver";
-               gpios = <&gpio7 9 1>;
+               gpios = <&gpio7 9 GPIO_ACTIVE_LOW>;
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_hummingboard2_gpio7_9>;
                linux,rc-map-name = "rc-rc6-mce";
@@ -76,7 +76,7 @@ reg_1p8v: regulator-1p8v {
        reg_usbh1_vbus: regulator-usb-h1-vbus {
                compatible = "regulator-fixed";
                enable-active-high;
-               gpio = <&gpio1 0 0>;
+               gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_hummingboard2_usbh1_vbus>;
                regulator-name = "usb_h1_vbus";
@@ -87,7 +87,7 @@ reg_usbh1_vbus: regulator-usb-h1-vbus {
        reg_usbotg_vbus: regulator-usb-otg-vbus {
                compatible = "regulator-fixed";
                enable-active-high;
-               gpio = <&gpio3 22 0>;
+               gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_hummingboard2_usbotg_vbus>;
                regulator-name = "usb_otg_vbus";
@@ -98,7 +98,7 @@ reg_usbotg_vbus: regulator-usb-otg-vbus {
        reg_usbh2_vbus: regulator-usb-h2-vbus {
                compatible = "regulator-gpio";
                enable-active-high;
-               enable-gpio = <&gpio2 13 0>;
+               enable-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_hummingboard2_usbh2_vbus>;
                regulator-name = "usb_h2_vbus";
@@ -110,7 +110,7 @@ reg_usbh2_vbus: regulator-usb-h2-vbus {
        reg_usbh3_vbus: regulator-usb-h3-vbus {
                compatible = "regulator-gpio";
                enable-active-high;
-               enable-gpio = <&gpio7 10 0>;
+               enable-gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>;
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_hummingboard2_usbh3_vbus>;
                regulator-name = "usb_h3_vbus";