/*
* In most cases we should not need to reprogram DPLL.
* Reprogramming the DPLL is tricky, it must be done from SRAM.
- * (on 730, bit 13 must always be 1)
*/
- if (cpu_is_omap7xx())
- omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000);
- else
- omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
+ omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
/* XXX Do we need to recalculate the tree below DPLL1 at this point? */
ck_dpll1_p->rate = ptr->pll_rate;
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/clkdev_omap.h>
+#include <plat/sram.h> /* for omap_sram_reprogram_clock() */
#include <plat/usb.h> /* for OTG_BASE */
#include "clock.h"
/* Find the highest supported frequency and enable it */
if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
pr_err("System frequencies not set, using default. Check your config.\n");
- omap_writew(0x2290, DPLL_CTL);
- omap_writew(cpu_is_omap7xx() ? 0x2005 : 0x0005, ARM_CKCTL);
+ /*
+ * Reprogramming the DPLL is tricky, it must be done from SRAM.
+ */
+ omap_sram_reprogram_clock(0x2290, 0x0005);
ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE;
}
propagate_rate(&ck_dpll1);
void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
{
BUG_ON(!_omap_sram_reprogram_clock);
+ /* On 730, bit 13 must always be 1 */
+ if (cpu_is_omap7xx())
+ ckctl |= 0x2000;
_omap_sram_reprogram_clock(dpllctl, ckctl);
}