ia64: use mem_data to detect nodes' minimal and maximal PFNs

When EFI memory map is traversed to determine the extents of each node, the
minimal and maximal PFNs are stored in the bootmem_data structures. The
same information ls later stored in the mem_data array of 'struct
early_node_data'.

Switch to using mem_data from the very beginning.

Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index 6148ea8338ad1e8fe00d57331e869ea9a5df9e3b..8e99d8e2455e1cad6f593d4dc081b11809a411e1 100644 (file)
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -57,33 +57,31 @@ pg_data_t *pgdat_list[MAX_NUMNODES];
             (((node)*PERCPU_PAGE_SIZE) & (MAX_NODE_ALIGN_OFFSET - 1)))
 
 /**
- * build_node_maps - callback to setup bootmem structs for each node
+ * build_node_maps - callback to setup mem_data structs for each node
  * @start: physical start of range
  * @len: length of range
  * @node: node where this range resides
  *
- * We allocate a struct bootmem_data for each piece of memory that we wish to
+ * Detect extents of each piece of memory that we wish to
  * treat as a virtually contiguous block (i.e. each node). Each such block
  * must start on an %IA64_GRANULE_SIZE boundary, so we round the address down
  * if necessary.  Any non-existent pages will simply be part of the virtual
- * memmap.  We also update min_low_pfn and max_low_pfn here as we receive
- * memory ranges from the caller.
+ * memmap.
  */
 static int __init build_node_maps(unsigned long start, unsigned long len,
                                  int node)
 {
        unsigned long spfn, epfn, end = start + len;
-       struct bootmem_data *bdp = &bootmem_node_data[node];
 
        epfn = GRANULEROUNDUP(end) >> PAGE_SHIFT;
        spfn = GRANULEROUNDDOWN(start) >> PAGE_SHIFT;
 
-       if (!bdp->node_low_pfn) {
-               bdp->node_min_pfn = spfn;
-               bdp->node_low_pfn = epfn;
+       if (!mem_data[node].min_pfn) {
+               mem_data[node].min_pfn = spfn;
+               mem_data[node].max_pfn = epfn;
        } else {
-               bdp->node_min_pfn = min(spfn, bdp->node_min_pfn);
-               bdp->node_low_pfn = max(epfn, bdp->node_low_pfn);
+               mem_data[node].min_pfn = min(spfn, mem_data[node].min_pfn);
+               mem_data[node].max_pfn = max(epfn, mem_data[node].max_pfn);
        }
 
        return 0;
@@ -323,19 +321,18 @@ static int __init find_pernode_space(unsigned long start, unsigned long len,
 {
        unsigned long spfn, epfn;
        unsigned long pernodesize = 0, pernode, pages, mapsize;
-       struct bootmem_data *bdp = &bootmem_node_data[node];
 
        spfn = start >> PAGE_SHIFT;
        epfn = (start + len) >> PAGE_SHIFT;
 
-       pages = bdp->node_low_pfn - bdp->node_min_pfn;
+       pages = mem_data[node].max_pfn - mem_data[node].min_pfn;
        mapsize = bootmem_bootmap_pages(pages) << PAGE_SHIFT;
 
        /*
         * Make sure this memory falls within this node's usable memory
         * since we may have thrown some away in build_maps().
         */
-       if (spfn < bdp->node_min_pfn || epfn > bdp->node_low_pfn)
+       if (spfn < mem_data[node].min_pfn || epfn > mem_data[node].max_pfn)
                return 0;
 
        /* Don't setup this node's local space twice... */
@@ -397,7 +394,7 @@ static void __init reserve_pernode_space(void)
                bdp = pdp->bdata;
 
                /* First the bootmem_map itself */
-               pages = bdp->node_low_pfn - bdp->node_min_pfn;
+               pages = mem_data[node].max_pfn - mem_data[node].min_pfn;
                size = bootmem_bootmap_pages(pages) << PAGE_SHIFT;
                base = __pa(bdp->node_bootmem_map);
                reserve_bootmem_node(pdp, base, size, BOOTMEM_DEFAULT);
@@ -541,10 +538,8 @@ void __init find_memory(void)
        efi_memmap_walk(find_max_min_low_pfn, NULL);
 
        for_each_online_node(node)
-               if (bootmem_node_data[node].node_low_pfn) {
+               if (mem_data[node].min_pfn)
                        node_clear(node, memory_less_mask);
-                       mem_data[node].min_pfn = ~0UL;
-               }
 
        efi_memmap_walk(filter_memory, register_active_ranges);
 
@@ -568,8 +563,8 @@ void __init find_memory(void)
 
                init_bootmem_node(pgdat_list[node],
                                  map>>PAGE_SHIFT,
-                                 bdp->node_min_pfn,
-                                 bdp->node_low_pfn);
+                                 mem_data[node].min_pfn,
+                                 mem_data[node].max_pfn);
        }
 
        efi_memmap_walk(filter_rsvd_memory, free_node_bootmem);
@@ -651,31 +646,6 @@ void call_pernode_memory(unsigned long start, unsigned long len, void *arg)
        }
 }
 
-/**
- * count_node_pages - callback to build per-node memory info structures
- * @start: physical start of range
- * @len: length of range
- * @node: node where this range resides
- *
- * Each node has it's own number of physical pages, DMAable pages, start, and
- * end page frame number.  This routine will be called by call_pernode_memory()
- * for each piece of usable memory and will setup these values for each node.
- * Very similar to build_maps().
- */
-static __init int count_node_pages(unsigned long start, unsigned long len, int node)
-{
-       unsigned long end = start + len;
-
-       start = GRANULEROUNDDOWN(start);
-       end = GRANULEROUNDUP(end);
-       mem_data[node].max_pfn = max(mem_data[node].max_pfn,
-                                    end >> PAGE_SHIFT);
-       mem_data[node].min_pfn = min(mem_data[node].min_pfn,
-                                    start >> PAGE_SHIFT);
-
-       return 0;
-}
-
 /**
  * paging_init - setup page tables
  *
@@ -692,8 +662,6 @@ void __init paging_init(void)
 
        max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT;
 
-       efi_memmap_walk(filter_rsvd_memory, count_node_pages);
-
        sparse_memory_present_with_active_regions(MAX_NUMNODES);
        sparse_init();