The following Kconfig constellations fail randconfig builds:
CONFIG_ACPI_NFIT=y
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_SKX=m
CONFIG_EDAC_I10NM=y
or
CONFIG_ACPI_NFIT=y
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_SKX=y
CONFIG_EDAC_I10NM=m
with:
...
CC [M] drivers/edac/skx_common.o
...
.../skx_common.o:.../skx_common.c:672: undefined reference to `__this_module'
That is because if one of the two drivers - skx_edac or i10nm_edac - is
built-in and the other one is a module, the shared file skx_common.c
gets linked into a module object by kbuild. Therefore, when linking that
same file into vmlinux, the '__this_module' symbol used in debugfs isn't
defined, leading to the above error.
Fix it by moving all debugfs code from skx_common.c to both skx_base.c
and i10nm_base.c respectively. Thus, skx_common.c doesn't refer to the
'__this_module' symbol anymore.
Clarify skx_common.c's purpose at the top of the file for future
reference, while at it.
[ bp: Make text more readable. ]
Fixes: d4dc89d069aa ("EDAC, i10nm: Add a driver for Intel 10nm server processors")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190321221339.GA32323@agluck-desk
.priority = MCE_PRIO_EDAC,
};
+#ifdef CONFIG_EDAC_DEBUG
+/*
+ * Debug feature.
+ * Exercise the address decode logic by writing an address to
+ * /sys/kernel/debug/edac/i10nm_test/addr.
+ */
+static struct dentry *i10nm_test;
+
+static int debugfs_u64_set(void *data, u64 val)
+{
+ struct mce m;
+
+ pr_warn_once("Fake error to 0x%llx injected via debugfs\n", val);
+
+ memset(&m, 0, sizeof(m));
+ /* ADDRV + MemRd + Unknown channel */
+ m.status = MCI_STATUS_ADDRV + 0x90;
+ /* One corrected error */
+ m.status |= BIT_ULL(MCI_STATUS_CEC_SHIFT);
+ m.addr = val;
+ skx_mce_check_error(NULL, 0, &m);
+
+ return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n");
+
+static void setup_i10nm_debug(void)
+{
+ i10nm_test = edac_debugfs_create_dir("i10nm_test");
+ if (!i10nm_test)
+ return;
+
+ if (!edac_debugfs_create_file("addr", 0200, i10nm_test,
+ NULL, &fops_u64_wo)) {
+ debugfs_remove(i10nm_test);
+ i10nm_test = NULL;
+ }
+}
+
+static void teardown_i10nm_debug(void)
+{
+ debugfs_remove_recursive(i10nm_test);
+}
+#else
+static inline void setup_i10nm_debug(void) {}
+static inline void teardown_i10nm_debug(void) {}
+#endif /*CONFIG_EDAC_DEBUG*/
+
static int __init i10nm_init(void)
{
u8 mc = 0, src_id = 0, node_id = 0;
opstate_init();
mce_register_decode_chain(&i10nm_mce_dec);
- setup_skx_debug("i10nm_test");
+ setup_i10nm_debug();
i10nm_printk(KERN_INFO, "%s\n", I10NM_REVISION);
static void __exit i10nm_exit(void)
{
edac_dbg(2, "\n");
- teardown_skx_debug();
+ teardown_i10nm_debug();
mce_unregister_decode_chain(&i10nm_mce_dec);
skx_adxl_put();
skx_remove();
.priority = MCE_PRIO_EDAC,
};
+#ifdef CONFIG_EDAC_DEBUG
+/*
+ * Debug feature.
+ * Exercise the address decode logic by writing an address to
+ * /sys/kernel/debug/edac/skx_test/addr.
+ */
+static struct dentry *skx_test;
+
+static int debugfs_u64_set(void *data, u64 val)
+{
+ struct mce m;
+
+ pr_warn_once("Fake error to 0x%llx injected via debugfs\n", val);
+
+ memset(&m, 0, sizeof(m));
+ /* ADDRV + MemRd + Unknown channel */
+ m.status = MCI_STATUS_ADDRV + 0x90;
+ /* One corrected error */
+ m.status |= BIT_ULL(MCI_STATUS_CEC_SHIFT);
+ m.addr = val;
+ skx_mce_check_error(NULL, 0, &m);
+
+ return 0;
+}
+DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n");
+
+static void setup_skx_debug(void)
+{
+ skx_test = edac_debugfs_create_dir("skx_test");
+ if (!skx_test)
+ return;
+
+ if (!edac_debugfs_create_file("addr", 0200, skx_test,
+ NULL, &fops_u64_wo)) {
+ debugfs_remove(skx_test);
+ skx_test = NULL;
+ }
+}
+
+static void teardown_skx_debug(void)
+{
+ debugfs_remove_recursive(skx_test);
+}
+#else
+static inline void setup_skx_debug(void) {}
+static inline void teardown_skx_debug(void) {}
+#endif /*CONFIG_EDAC_DEBUG*/
+
/*
* skx_init:
* make sure we are running on the correct cpu model
/* Ensure that the OPSTATE is set correctly for POLL or NMI */
opstate_init();
- setup_skx_debug("skx_test");
+ setup_skx_debug();
mce_register_decode_chain(&skx_mce_dec);
// SPDX-License-Identifier: GPL-2.0
/*
- * Common codes for both the skx_edac driver and Intel 10nm server EDAC driver.
- * Originally split out from the skx_edac driver.
+ *
+ * Shared code by both skx_edac and i10nm_edac. Originally split out
+ * from the skx_edac driver.
+ *
+ * This file is linked into both skx_edac and i10nm_edac drivers. In
+ * order to avoid link errors, this file must be like a pure library
+ * without including symbols and defines which would otherwise conflict,
+ * when linked once into a module and into a built-in object, at the
+ * same time. For example, __this_module symbol references when that
+ * file is being linked into a built-in object.
*
* Copyright (c) 2018, Intel Corporation.
*/
kfree(d);
}
}
-
-#ifdef CONFIG_EDAC_DEBUG
-/*
- * Debug feature.
- * Exercise the address decode logic by writing an address to
- * /sys/kernel/debug/edac/dirname/addr.
- */
-static struct dentry *skx_test;
-
-static int debugfs_u64_set(void *data, u64 val)
-{
- struct mce m;
-
- pr_warn_once("Fake error to 0x%llx injected via debugfs\n", val);
-
- memset(&m, 0, sizeof(m));
- /* ADDRV + MemRd + Unknown channel */
- m.status = MCI_STATUS_ADDRV + 0x90;
- /* One corrected error */
- m.status |= BIT_ULL(MCI_STATUS_CEC_SHIFT);
- m.addr = val;
- skx_mce_check_error(NULL, 0, &m);
-
- return 0;
-}
-DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n");
-
-void setup_skx_debug(const char *dirname)
-{
- skx_test = edac_debugfs_create_dir(dirname);
- if (!skx_test)
- return;
-
- if (!edac_debugfs_create_file("addr", 0200, skx_test,
- NULL, &fops_u64_wo)) {
- debugfs_remove(skx_test);
- skx_test = NULL;
- }
-}
-
-void teardown_skx_debug(void)
-{
- debugfs_remove_recursive(skx_test);
-}
-#endif /*CONFIG_EDAC_DEBUG*/
void skx_remove(void);
-#ifdef CONFIG_EDAC_DEBUG
-void setup_skx_debug(const char *dirname);
-void teardown_skx_debug(void);
-#else
-static inline void setup_skx_debug(const char *dirname) {}
-static inline void teardown_skx_debug(void) {}
-#endif /*CONFIG_EDAC_DEBUG*/
-
#endif /* _SKX_COMM_EDAC_H */