From: Lukas Wunner <lukas@wunner.de>
Date: Fri, 24 Nov 2017 22:26:40 +0000 (+0100)
Subject: serial: fsl_lpuart: Support common rs485 binding for RTS polarity
X-Git-Tag: v4.16-rc1~113^2~48
X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=01d845352a81df133234a106f34cc93937dcb7bd;p=linux.git

serial: fsl_lpuart: Support common rs485 binding for RTS polarity

Invoke the ->rs485_config callback on probe to set UARTMODEM_TXRTSPOL
appropriately based on the UART's device properties.

This implicitly sets UARTMODEM_TXRTSE if rs485 was enabled in the device
properties, so drop the identical code from lpuart_probe().

It also fixes a bug:  If an unsupported rs485 property was specified
(rs485-rx-during-tx or rs485-rts-delay), the driver returns -ENOSYS
without performing any cleanup, in particular without calling
uart_remove_one_port() or clk_disable_unprepare(), thus leaking the
uart_port. But with the invocation of ->rs485_config, the unsupported
properties are now cleared in struct serial_rs485 and thus ignored.
It therefore seems sufficient to just log an error instead of bailing
out.

Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 38e76f95490e..8cf112f2efc3 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -2208,21 +2208,14 @@ static int lpuart_probe(struct platform_device *pdev)
 
 	uart_get_rs485_mode(&pdev->dev, &sport->port.rs485);
 
-	if (sport->port.rs485.flags & SER_RS485_RX_DURING_TX) {
+	if (sport->port.rs485.flags & SER_RS485_RX_DURING_TX)
 		dev_err(&pdev->dev, "driver doesn't support RX during TX\n");
-		return -ENOSYS;
-	}
 
 	if (sport->port.rs485.delay_rts_before_send ||
-	    sport->port.rs485.delay_rts_after_send) {
+	    sport->port.rs485.delay_rts_after_send)
 		dev_err(&pdev->dev, "driver doesn't support RTS delays\n");
-		return -ENOSYS;
-	}
 
-	if (sport->port.rs485.flags & SER_RS485_ENABLED) {
-		sport->port.rs485.flags |= SER_RS485_RTS_ON_SEND;
-		writeb(UARTMODEM_TXRTSE, sport->port.membase + UARTMODEM);
-	}
+	lpuart_config_rs485(&sport->port, &sport->port.rs485);
 
 	sport->dma_tx_chan = dma_request_slave_channel(sport->port.dev, "tx");
 	if (!sport->dma_tx_chan)