From: Mintz, Yuval Date: Thu, 23 Mar 2017 13:50:17 +0000 (+0200) Subject: qed: Correct endian order of MAC passed to MFW X-Git-Tag: v4.12-rc1~108^2~348^2~3 X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=179910020759bffe8d75f0b69e6307c25e4d660d;p=linux.git qed: Correct endian order of MAC passed to MFW The management firmware is running on a Big Endian processor, and when running on LE platform HW is configured to swap access to memory shared between management firmware and driver on 32-bit granulariy. As a result, for matters of simplicity most of the APIs between driver and management firmware are based on 32-bit variables. MAC settings are one exception, as driver needs to fill a byte array when indicating to management firmware that primary MAC has changed. Due to the swap, driver must make sure that the mac that was provided in byte-order would be translated into native order, otherwise after the swap the management firmware would read it swapped. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c index 8d181025e78c..d1fcd874ce9a 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c @@ -1600,6 +1600,7 @@ int qed_mcp_ov_update_mac(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, u8 *mac) { struct qed_mcp_mb_params mb_params; + u32 mfw_mac[2]; int rc; memset(&mb_params, 0, sizeof(mb_params)); @@ -1608,8 +1609,16 @@ int qed_mcp_ov_update_mac(struct qed_hwfn *p_hwfn, DRV_MSG_CODE_VMAC_TYPE_SHIFT; mb_params.param |= MCP_PF_ID(p_hwfn); - mb_params.p_data_src = mac; - mb_params.data_src_size = 6; + /* MCP is BE, and on LE platforms PCI would swap access to SHMEM + * in 32-bit granularity. + * So the MAC has to be set in native order [and not byte order], + * otherwise it would be read incorrectly by MFW after swap. + */ + mfw_mac[0] = mac[0] << 24 | mac[1] << 16 | mac[2] << 8 | mac[3]; + mfw_mac[1] = mac[4] << 24 | mac[5] << 16; + + mb_params.p_data_src = (u8 *)mfw_mac; + mb_params.data_src_size = 8; rc = qed_mcp_cmd_and_union(p_hwfn, p_ptt, &mb_params); if (rc) DP_ERR(p_hwfn, "Failed to send mac address, rc = %d\n", rc);