From: Daniel Mack <daniel@zonque.org>
Date: Thu, 17 May 2018 09:05:52 +0000 (+0200)
Subject: ARM: dts: imx28/imx53: enable edt-ft5x06 wakeup source
X-Git-Tag: v4.18-rc1~50^2~24^2
X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=204d9e32b7971ecd187068c3a40c48bac4656cb0;p=linux.git

ARM: dts: imx28/imx53: enable edt-ft5x06 wakeup source

The touchscreen driver no longer configures the device as wakeup source by
default. A "wakeup-source" property is needed.

To avoid regressions, this patch changes the DTS files for the only two
users of this driver that didn't have this property yet.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index e4f19f9be6d0..b8f46432e2a2 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -340,6 +340,7 @@ polytouch: edt-ft5x06@38 {
 		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 		reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
 		wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
 	};
 
 	touchscreen: tsc2007@48 {
diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
index af8ec5e4417b..a7f77527269d 100644
--- a/arch/arm/boot/dts/imx53-tx53-x03x.dts
+++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts
@@ -245,6 +245,7 @@ polytouch: edt-ft5x06@38 {
 		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
 		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
 		wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
 	};
 
 	touchscreen: tsc2007@48 {