From: Yannick Fertré <yannick.fertre@st.com>
Date: Fri, 2 Aug 2019 14:08:51 +0000 (+0200)
Subject: ARM: dts: stm32: move ltdc pinctrl on stm32mp157a dk1 board
X-Git-Tag: v5.5-rc1~39^2~39^2~18
X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=29d437022f1efd3122fe7298e9a42274c7cc1773;p=linux.git

ARM: dts: stm32: move ltdc pinctrl on stm32mp157a dk1 board

The ltdc pinctrl must be in the display controller node and
not in the peripheral node (hdmi bridge).

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
---

diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts
index 0615d1c8a6fc..b28d75434b63 100644
--- a/arch/arm/boot/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts
@@ -146,9 +146,6 @@ hdmi-transmitter@39 {
 		reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
 		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-parent = <&gpiog>;
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&ltdc_pins_a>;
-		pinctrl-1 = <&ltdc_pins_sleep_a>;
 		status = "okay";
 
 		ports {
@@ -356,6 +353,9 @@ &iwdg2 {
 };
 
 &ltdc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ltdc_pins_a>;
+	pinctrl-1 = <&ltdc_pins_sleep_a>;
 	status = "okay";
 
 	port {