From: Olof Johansson <olof@lixom.net>
Date: Mon, 19 Jun 2017 03:15:54 +0000 (-0700)
Subject: Merge tag 'arm-soc/for-4.13/devicetree' of http://github.com/Broadcom/stblinux into... 
X-Git-Tag: v4.13-rc1~168^2~17
X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=2a65ec81b750d24e1310546852c5166d622609b2;p=linux.git

Merge tag 'arm-soc/for-4.13/devicetree' of http://github.com/Broadcom/stblinux into next/dt

This pull request contains Broadcom ARM-based Device Tree changes for 4.13.

Note that Baruch's changes are fixes that are currently included in v4.12-rc2,
but they are also included here in order to keep this tag based off v4.12-rc1.

Please pull the following:

- Rafal adds CPU and thermal zones to the Northstar (BCM5301X) Device Tree and he
  also adds the MDIO controller nodes for later use by USB PHYs

- Eric adds support for the V3D engine and Ethernet switch on the Cygnus
  platforms, he also adds a set of Device Tree sources and include files for the
  Raspberry Pi 3 (BCM2837) to be used with the ARM/Linux kernel,

- Jon adds CPU and thermal zones to the Northstar Plus Device Tree files

- Stefan updates the Raspberry Pi DTS files with thermal trip points and zones,
  adds support for the USB OTG on the Raspberry Pi Zero which includes the
  proper dwc2 configuration, a generic USB PHY and finally the enabling of the
  OTG controller by including the proper DTS include file

- Gerd switches the Raspberry Pi DTS files to use the SDHOST controller (faster
  than the SDHCI)

* tag 'arm-soc/for-4.13/devicetree' of http://github.com/Broadcom/stblinux:
  ARM: dts: bcm2835-rpi-zero: Enable OTG mode
  ARM: dts: bcm283x: Add generic USB PHY
  ARM: dts: bcm283x: Add dtsi for OTG mode
  ARM: dts: Cygnus: Add the ethernet switch and ethernet PHY
  ARM: dts: NSP: Add Thermal Support
  ARM: dts: Cygnus: Add BCM11360's V3D device
  ARM: dts: BCM5301X: Specify MDIO bus in the DT
  ARM: dts: BCM5301X: Add CPU thermal sensor and zone
  ARM: dts: bcm283x: switch from &sdhci to &sdhost
  ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point
  ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6)

Signed-off-by: Olof Johansson <olof@lixom.net>
---

2a65ec81b750d24e1310546852c5166d622609b2