From: Thierry Reding Date: Thu, 21 Feb 2019 15:46:30 +0000 (+0100) Subject: dt-bindings: phy: tegra: Add Tegra186 support X-Git-Tag: v5.2-rc1~132^2~37^2~50 X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=2b8d59296cff37a73dc72a0667c148b0e57ae64f;p=linux.git dt-bindings: phy: tegra: Add Tegra186 support Extend the bindings to cover the set of features found in Tegra186. Note that, technically, there are four more supplies connected to the XUSB pad controller (DVDD_PEX, DVDD_PEX_PLL, HVDD_PEX and HVDD_PEX_PLL), but the power sequencing requirements of Tegra186 require these to be under the control of the PMIC. Reviewed-by: JC Kuo Signed-off-by: Thierry Reding Reviewed-by: Rob Herring Signed-off-by: Kishon Vijay Abraham I --- diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt index 3742c152c467..daedb15f322e 100644 --- a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt @@ -36,11 +36,20 @@ Required properties: - Tegra124: "nvidia,tegra124-xusb-padctl" - Tegra132: "nvidia,tegra132-xusb-padctl", "nvidia,tegra124-xusb-padctl" - Tegra210: "nvidia,tegra210-xusb-padctl" + - Tegra186: "nvidia,tegra186-xusb-padctl" - reg: Physical base address and length of the controller's registers. - resets: Must contain an entry for each entry in reset-names. - reset-names: Must include the following entries: - "padctl" +For Tegra186: +- avdd-pll-erefeut-supply: UPHY brick and reference clock as well as UTMI PHY + power supply. Must supply 1.8 V. +- avdd-usb-supply: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must supply + 3.3 V. +- vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V. +- vddio-hsic-supply: HSIC PHY power supply. Must supply 1.2 V. + Pad nodes: ==========