From: Bartosz Golaszewski Date: Tue, 6 Aug 2019 11:41:51 +0000 (+0200) Subject: gpiolib: never report open-drain/source lines as 'input' to user-space X-Git-Tag: v5.3-rc6~11^2~3 X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=2c60e6b5c9241b24b8b523fefd3e44fb85622cda;p=linux.git gpiolib: never report open-drain/source lines as 'input' to user-space If the driver doesn't support open-drain/source config options, we emulate this behavior when setting the direction by calling gpiod_direction_input() if the default value is 0 (open-source) or 1 (open-drain), thus not actively driving the line in those cases. This however clears the FLAG_IS_OUT bit for the GPIO line descriptor and makes the LINEINFO ioctl() incorrectly report this line's mode as 'input' to user-space. This commit modifies the ioctl() to always set the GPIOLINE_FLAG_IS_OUT bit in the lineinfo structure's flags field. Since it's impossible to use the input mode and open-drain/source options at the same time, we can be sure the reported information will be correct. Fixes: 521a2ad6f862 ("gpio: add userspace ABI for GPIO line information") Cc: stable Signed-off-by: Bartosz Golaszewski Link: https://lore.kernel.org/r/20190806114151.17652-1-brgl@bgdev.pl Signed-off-by: Linus Walleij --- diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index f497003f119c..80a2a2cb673b 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1091,9 +1091,11 @@ static long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) if (test_bit(FLAG_ACTIVE_LOW, &desc->flags)) lineinfo.flags |= GPIOLINE_FLAG_ACTIVE_LOW; if (test_bit(FLAG_OPEN_DRAIN, &desc->flags)) - lineinfo.flags |= GPIOLINE_FLAG_OPEN_DRAIN; + lineinfo.flags |= (GPIOLINE_FLAG_OPEN_DRAIN | + GPIOLINE_FLAG_IS_OUT); if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) - lineinfo.flags |= GPIOLINE_FLAG_OPEN_SOURCE; + lineinfo.flags |= (GPIOLINE_FLAG_OPEN_SOURCE | + GPIOLINE_FLAG_IS_OUT); if (copy_to_user(ip, &lineinfo, sizeof(lineinfo))) return -EFAULT;