From: Philip Rakity Date: Thu, 26 Jan 2012 14:57:10 +0000 (-0800) Subject: mmc: core: UHS sdio card that fails should not exceed 50MHz X-Git-Tag: v3.3-rc4~20^2~14 X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=2d0d68f583279dbdcc1a2ef3f81ea8d285a0adbe;p=linux.git mmc: core: UHS sdio card that fails should not exceed 50MHz A UHS sdio card that fails initialization at 1.8v signaling is not in UHS mode. We cannot use the speed in the the cis to reflect the bus speed as this is the maxiumum value and will not reflect the fact that the host is operating at a lower (non uhs) bus speed. Signed-off-by: Philip Rakity Signed-off-by: Bing Zhao Reviewed-by: Aaron Lu Signed-off-by: Chris Ball --- diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index bd7bacc950dc..12cde6ee17f5 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -98,10 +98,11 @@ static int sdio_init_func(struct mmc_card *card, unsigned int fn) return ret; } -static int sdio_read_cccr(struct mmc_card *card) +static int sdio_read_cccr(struct mmc_card *card, u32 ocr) { int ret; int cccr_vsn; + int uhs = ocr & R4_18V_PRESENT; unsigned char data; unsigned char speed; @@ -149,7 +150,7 @@ static int sdio_read_cccr(struct mmc_card *card) card->scr.sda_spec3 = 0; card->sw_caps.sd3_bus_mode = 0; card->sw_caps.sd3_drv_type = 0; - if (cccr_vsn >= SDIO_CCCR_REV_3_00) { + if (cccr_vsn >= SDIO_CCCR_REV_3_00 && uhs) { card->scr.sda_spec3 = 1; ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_UHS, 0, &data); @@ -712,7 +713,7 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, /* * Read the common registers. */ - err = sdio_read_cccr(card); + err = sdio_read_cccr(card, ocr); if (err) goto remove;