From: Peter Griffin <peter.griffin@linaro.org>
Date: Wed, 10 Jun 2015 14:04:00 +0000 (+0200)
Subject: ARM: STi: DT: Add STiH407 family tsin3 pinctrl configuration
X-Git-Tag: v4.3-rc1~120^2~45^2~11
X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=36cfc8c14365aa604e5b31e53d56db1299e4008f;p=linux.git

ARM: STi: DT: Add STiH407 family tsin3 pinctrl configuration

tsin3 channel can only be configured for serial data transfer.

On B2120 reference design tsin3 is brought out as TSB on the NIMB
slot of the B2004A daughter board.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
---

diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index fc6097ca5b15..760f925e1dcc 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -523,6 +523,18 @@ st,pins {
 					};
 				};
 			};
+
+			tsin3 {
+				pinctrl_tsin3_serial: tsin3_serial {
+					st,pins {
+						DATA7 = <&pio14 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						CLKIN = <&pio14 0 ALT1 IN CLKNOTDATA 0 CLK_A>;
+						VALID = <&pio13 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						ERROR = <&pio13 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						PKCLK = <&pio13 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+			};
 		};
 
 		pin-controller-front1 {