From: Wolfram Sang Date: Fri, 1 Apr 2016 15:44:33 +0000 (+0200) Subject: mmc: tmio: Add UHS-I mode support X-Git-Tag: v4.7-rc1~172^2~89 X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=452e5eef6d311e52f657b34d999758107ec3dd4a;p=linux.git mmc: tmio: Add UHS-I mode support Based on work by Shinobu Uehara and Ben Dooks. This adds the voltage switch operation needed for all UHS-I modes, but not the tuning needed for SDR-104 which will come later. Signed-off-by: Ben Hutchings Signed-off-by: Wolfram Sang Signed-off-by: Ulf Hansson --- diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h index b44b58902906..b1819c74965b 100644 --- a/drivers/mmc/host/tmio_mmc.h +++ b/drivers/mmc/host/tmio_mmc.h @@ -101,6 +101,8 @@ struct tmio_mmc_host { void (*clk_disable)(struct tmio_mmc_host *host); int (*multi_io_quirk)(struct mmc_card *card, unsigned int direction, int blk_size); + int (*start_signal_voltage_switch)(struct mmc_host *mmc, + struct mmc_ios *ios); }; struct tmio_mmc_host *tmio_mmc_host_alloc(struct platform_device *pdev); diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index ecc16a3ee786..6727198dee3f 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -1012,12 +1012,20 @@ static int tmio_multi_io_quirk(struct mmc_card *card, return blk_size; } -static const struct mmc_host_ops tmio_mmc_ops = { +static int tmio_mmc_card_busy(struct mmc_host *mmc) +{ + struct tmio_mmc_host *host = mmc_priv(mmc); + + return !(sd_ctrl_read32(host, CTL_STATUS2) & TMIO_STATUS2_DAT0); +} + +static struct mmc_host_ops tmio_mmc_ops = { .request = tmio_mmc_request, .set_ios = tmio_mmc_set_ios, .get_ro = tmio_mmc_get_ro, .get_cd = mmc_gpio_get_cd, .enable_sdio_irq = tmio_mmc_enable_sdio_irq, + .card_busy = tmio_mmc_card_busy, .multi_io_quirk = tmio_multi_io_quirk, }; @@ -1116,7 +1124,9 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host, goto host_free; } + tmio_mmc_ops.start_signal_voltage_switch = _host->start_signal_voltage_switch; mmc->ops = &tmio_mmc_ops; + mmc->caps |= MMC_CAP_4_BIT_DATA | pdata->capabilities; mmc->caps2 |= pdata->capabilities2; mmc->max_segs = 32; diff --git a/include/linux/mmc/tmio.h b/include/linux/mmc/tmio.h index 5f5cd80e9765..b2f28e995033 100644 --- a/include/linux/mmc/tmio.h +++ b/include/linux/mmc/tmio.h @@ -63,6 +63,8 @@ #define TMIO_STAT_CMD_BUSY 0x40000000 #define TMIO_STAT_ILL_ACCESS 0x80000000 +#define TMIO_STATUS2_DAT0 BIT(7) + #define CLK_CTL_DIV_MASK 0xff #define CLK_CTL_SCLKEN BIT(8)