From: Alexander Shiyan Date: Sat, 6 Aug 2016 04:56:23 +0000 (+0300) Subject: ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support X-Git-Tag: v4.9-rc1~81^2~2^2~7 X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=5081c3262f0466e52e6ce49453a5603fd85e048a;p=linux.git ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support mach-apf9328.c can be replaced with devicetree equivalent: imx1-apf9328.dts, so remove the board file. Signed-off-by: Alexander Shiyan Signed-off-by: Shawn Guo --- diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 9083399a8ab1..2b2d589017b9 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -23,7 +23,6 @@ CONFIG_ARCH_MULTI_V5=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MXC=y CONFIG_MACH_SCB9328=y -CONFIG_MACH_APF9328=y CONFIG_MACH_MX21ADS=y CONFIG_MACH_MX27ADS=y CONFIG_MACH_MX27_3DS=y diff --git a/arch/arm/configs/multi_v4t_defconfig b/arch/arm/configs/multi_v4t_defconfig index 433eebb4103f..d744692f308d 100644 --- a/arch/arm/configs/multi_v4t_defconfig +++ b/arch/arm/configs/multi_v4t_defconfig @@ -21,7 +21,6 @@ CONFIG_INTEGRATOR_CM920T=y CONFIG_INTEGRATOR_CM922T_XA10=y CONFIG_ARCH_MXC=y CONFIG_MACH_SCB9328=y -CONFIG_MACH_APF9328=y CONFIG_MACH_IMX1_DT=y CONFIG_ARCH_NSPIRE=y CONFIG_AEABI=y diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index ee9a318cab31..52dd9440f04f 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -109,14 +109,6 @@ config MACH_SCB9328 help Say Y here if you are using a Synertronixx scb9328 board -config MACH_APF9328 - bool "APF9328" - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select SOC_IMX1 - help - Say Yes here if you are using the Armadeus APF9328 development board - config MACH_IMX1_DT bool "Support i.MX1 platforms from device tree" select SOC_IMX1 diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 9f5fffd62702..3bbd06d76cba 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -37,7 +37,6 @@ endif # i.MX1 based machines obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o -obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o # i.MX21 based machines diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c deleted file mode 100644 index ebbb5ab63529..000000000000 --- a/arch/arm/mach-imx/mach-apf9328.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - * linux/arch/arm/mach-imx/mach-apf9328.c - * - * Copyright (c) 2005-2011 ARMadeus systems - * - * This work is based on mach-scb9328.c which is: - * Copyright (c) 2004 Sascha Hauer - * Copyright (c) 2006-2008 Juergen Beisert - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "common.h" -#include "devices-imx1.h" -#include "hardware.h" -#include "iomux-mx1.h" - -static const int apf9328_pins[] __initconst = { - /* UART1 */ - PC9_PF_UART1_CTS, - PC10_PF_UART1_RTS, - PC11_PF_UART1_TXD, - PC12_PF_UART1_RXD, - /* UART2 */ - PB28_PF_UART2_CTS, - PB29_PF_UART2_RTS, - PB30_PF_UART2_TXD, - PB31_PF_UART2_RXD, - /* I2C */ - PA15_PF_I2C_SDA, - PA16_PF_I2C_SCL, -}; - -/* - * The APF9328 can have up to 32MB NOR Flash - */ -static struct resource flash_resource = { - .start = MX1_CS0_PHYS, - .end = MX1_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct physmap_flash_data apf9328_flash_data = { - .width = 2, -}; - -static struct platform_device apf9328_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &apf9328_flash_data, - }, - .resource = &flash_resource, - .num_resources = 1, -}; - -/* - * APF9328 has a DM9000 Ethernet controller - */ -static struct dm9000_plat_data dm9000_setup = { - .flags = DM9000_PLATF_16BITONLY -}; - -static struct resource dm9000_resources[] = { - { - .start = MX1_CS4_PHYS + 0x00C00000, - .end = MX1_CS4_PHYS + 0x00C00001, - .flags = IORESOURCE_MEM, - }, { - .start = MX1_CS4_PHYS + 0x00C00002, - .end = MX1_CS4_PHYS + 0x00C00003, - .flags = IORESOURCE_MEM, - }, { - /* irq number is run-time assigned */ - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct platform_device dm9000x_device = { - .name = "dm9000", - .id = 0, - .num_resources = ARRAY_SIZE(dm9000_resources), - .resource = dm9000_resources, - .dev = { - .platform_data = &dm9000_setup, - } -}; - -static const struct imxuart_platform_data uart1_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct imxi2c_platform_data apf9328_i2c_data __initconst = { - .bitrate = 100000, -}; - -static struct platform_device *devices[] __initdata = { - &apf9328_flash_device, - &dm9000x_device, -}; - -static void __init apf9328_init(void) -{ - imx1_soc_init(); - - mxc_gpio_setup_multiple_pins(apf9328_pins, - ARRAY_SIZE(apf9328_pins), - "APF9328"); - - imx1_add_imx_uart0(NULL); - imx1_add_imx_uart1(&uart1_pdata); - - imx1_add_imx_i2c(&apf9328_i2c_data); - - dm9000_resources[2].start = gpio_to_irq(IMX_GPIO_NR(2, 14)); - dm9000_resources[2].end = gpio_to_irq(IMX_GPIO_NR(2, 14)); - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -static void __init apf9328_timer_init(void) -{ - mx1_clocks_init(32768); -} - -MACHINE_START(APF9328, "Armadeus APF9328") - /* Maintainer: Gwenhael Goavec-Merou, ARMadeus Systems */ - .map_io = mx1_map_io, - .init_early = imx1_init_early, - .init_irq = mx1_init_irq, - .init_time = apf9328_timer_init, - .init_machine = apf9328_init, - .restart = mxc_restart, -MACHINE_END