From: Amit Kucheria Date: Wed, 20 Mar 2019 13:18:01 +0000 (+0530) Subject: arm64: dts: qcom: qcs404: Add tsens controller X-Git-Tag: v5.3-rc1~19^2~7^2~3 X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=64cf50d0c8d16679faf24864cff8bbe95c08f116;p=linux.git arm64: dts: qcom: qcs404: Add tsens controller qcs404 has a single TSENS IP block with 10 sensors. The calibration data is stored in an eeprom (qfprom) that is accessed through the nvmem framework. We add the qfprom node to allow the tsens sensors to be calibrated correctly. Signed-off-by: Amit Kucheria Signed-off-by: Andy Gross --- diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 3f17e1b09c13..4e5fe3f12f4b 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -251,6 +251,16 @@ rpm_msg_ram: memory@60000 { reg = <0x00060000 0x6000>; }; + qfprom: qfprom@a4000 { + compatible = "qcom,qfprom"; + reg = <0x000a4000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + tsens_caldata: caldata@d0 { + reg = <0x1f8 0x14>; + }; + }; + rng: rng@e3000 { compatible = "qcom,prng-ee"; reg = <0x000e3000 0x1000>; @@ -258,6 +268,16 @@ rng: rng@e3000 { clock-names = "core"; }; + tsens: thermal-sensor@4a9000 { + compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ + nvmem-cells = <&tsens_caldata>; + nvmem-cell-names = "calib"; + #qcom,sensors = <10>; + #thermal-sensor-cells = <1>; + }; + remoteproc_cdsp: remoteproc@b00000 { compatible = "qcom,qcs404-cdsp-pas"; reg = <0x00b00000 0x4040>;