From: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Date: Mon, 30 Jul 2018 16:26:33 +0000 (+0300)
Subject: ARC: dma [IOC]: mark DMA devices connected as dma-coherent
X-Git-Tag: v4.19-rc3~10^2~3
X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=678c8110d23c0ac7d69fda558992c31be64e7507;p=linux.git

ARC: dma [IOC]: mark DMA devices connected as dma-coherent

Mark DMA devices on AXS103 and HSDK boards connected through IOC
port as dma-coherent.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
---

diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi
index dc91c663bcc0..d75d65ddf8e3 100644
--- a/arch/arc/boot/dts/axc003.dtsi
+++ b/arch/arc/boot/dts/axc003.dtsi
@@ -93,6 +93,32 @@ arcpct0: pct {
 		};
 	};
 
+	/*
+	 * Mark DMA peripherals connected via IOC port as dma-coherent. We do
+	 * it via overlay because peripherals defined in axs10x_mb.dtsi are
+	 * used for both AXS101 and AXS103 boards and only AXS103 has IOC (so
+	 * only AXS103 board has HW-coherent DMA peripherals)
+	 * We don't need to mark pgu@17000 as dma-coherent because it uses
+	 * external DMA buffer located outside of IOC aperture.
+	 */
+	axs10x_mb {
+		ethernet@0x18000 {
+			dma-coherent;
+		};
+
+		ehci@0x40000 {
+			dma-coherent;
+		};
+
+		ohci@0x60000 {
+			dma-coherent;
+		};
+
+		mmc@0x15000 {
+			dma-coherent;
+		};
+	};
+
 	/*
 	 * The DW APB ICTL intc on MB is connected to CPU intc via a
 	 * DT "invisible" DW APB GPIO block, configured to simply pass thru
diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi
index 69ff4895f2ba..a05bb737ea63 100644
--- a/arch/arc/boot/dts/axc003_idu.dtsi
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@@ -100,6 +100,32 @@ arcpct0: pct {
 		};
 	};
 
+	/*
+	 * Mark DMA peripherals connected via IOC port as dma-coherent. We do
+	 * it via overlay because peripherals defined in axs10x_mb.dtsi are
+	 * used for both AXS101 and AXS103 boards and only AXS103 has IOC (so
+	 * only AXS103 board has HW-coherent DMA peripherals)
+	 * We don't need to mark pgu@17000 as dma-coherent because it uses
+	 * external DMA buffer located outside of IOC aperture.
+	 */
+	axs10x_mb {
+		ethernet@0x18000 {
+			dma-coherent;
+		};
+
+		ehci@0x40000 {
+			dma-coherent;
+		};
+
+		ohci@0x60000 {
+			dma-coherent;
+		};
+
+		mmc@0x15000 {
+			dma-coherent;
+		};
+	};
+
 	/*
 	 * This INTC is actually connected to DW APB GPIO
 	 * which acts as a wire between MB INTC and CPU INTC.
diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
index d00f283094d3..ef149f59929a 100644
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -181,6 +181,7 @@ gmac: ethernet@8000 {
 			resets = <&cgu_rst HSDK_ETH_RESET>;
 			reset-names = "stmmaceth";
 			mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
+			dma-coherent;
 
 			mdio {
 				#address-cells = <1>;
@@ -199,12 +200,14 @@ ohci@60000 {
 			compatible = "snps,hsdk-v1.0-ohci", "generic-ohci";
 			reg = <0x60000 0x100>;
 			interrupts = <15>;
+			dma-coherent;
 		};
 
 		ehci@40000 {
 			compatible = "snps,hsdk-v1.0-ehci", "generic-ehci";
 			reg = <0x40000 0x100>;
 			interrupts = <15>;
+			dma-coherent;
 		};
 
 		mmc@a000 {
@@ -217,6 +220,7 @@ mmc@a000 {
 			clock-names = "biu", "ciu";
 			interrupts = <12>;
 			bus-width = <4>;
+			dma-coherent;
 		};
 	};