From: Suganath Prabu S Date: Thu, 17 Nov 2016 10:45:58 +0000 (+0530) Subject: scsi: mpt3sas: Unblock device after controller reset X-Git-Tag: v4.9-rc8~21^2^2~1 X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=7ff723ad0f87feba43dda45fdae71206063dd7d4;p=linux.git scsi: mpt3sas: Unblock device after controller reset While issuing any ATA passthrough command to firmware the driver will block the device. But it will unblock the device only if the I/O completes through the ISR path. If a controller reset occurs before command completion the device will remain in blocked state. Make sure we unblock the device following a controller reset if an ATA passthrough command was queued. [mkp: clarified patch description] Cc: # v4.4+ Fixes: ac6c2a93bd07 ("mpt3sas: Fix for SATA drive in blocked state, after diag reset") Signed-off-by: Suganath Prabu S Signed-off-by: Martin K. Petersen --- diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 91b70bc46e7f..1c4744e78173 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -3885,6 +3885,11 @@ _scsih_temp_threshold_events(struct MPT3SAS_ADAPTER *ioc, } } +static inline bool ata_12_16_cmd(struct scsi_cmnd *scmd) +{ + return (scmd->cmnd[0] == ATA_12 || scmd->cmnd[0] == ATA_16); +} + /** * _scsih_flush_running_cmds - completing outstanding commands. * @ioc: per adapter object @@ -3906,6 +3911,9 @@ _scsih_flush_running_cmds(struct MPT3SAS_ADAPTER *ioc) if (!scmd) continue; count++; + if (ata_12_16_cmd(scmd)) + scsi_internal_device_unblock(scmd->device, + SDEV_RUNNING); mpt3sas_base_free_smid(ioc, smid); scsi_dma_unmap(scmd); if (ioc->pci_error_recovery) @@ -4010,11 +4018,6 @@ _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status) SAM_STAT_CHECK_CONDITION; } -static inline bool ata_12_16_cmd(struct scsi_cmnd *scmd) -{ - return (scmd->cmnd[0] == ATA_12 || scmd->cmnd[0] == ATA_16); -} - /** * scsih_qcmd - main scsi request entry point * @scmd: pointer to scsi command object