From: Jon Hunter Date: Tue, 8 Dec 2015 10:26:49 +0000 (+0000) Subject: ARM: tegra: Fix suspend hang on Tegra124 Chromebooks X-Git-Tag: v4.4-rc7~2^2 X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=80373d37bee562060ce4d3e5272b708e8db5d1fc;p=linux.git ARM: tegra: Fix suspend hang on Tegra124 Chromebooks Enabling CPUFreq support for Tegra124 Chromebooks is causing the Tegra124 to hang when resuming from suspend. When CPUFreq is enabled, the CPU clock is changed from the PLLX clock to the DFLL clock during kernel boot. When resuming from suspend the CPU clock is temporarily changed back to the PLLX clock before switching back to the DFLL. If the DFLL is operating at a much lower frequency than the PLLX when we enter suspend, and so the CPU voltage rail is at a voltage too low for the CPUs to operate at the PLLX frequency, then the device will hang. Please note that the PLLX is used in the resume sequence to switch the CPU clock from the very slow 32K clock to a faster clock during early resume to speed up the resume sequence before the DFLL is resumed. Ideally, we should fix this by setting the suspend frequency so that it matches the PLLX frequency, however, that would be a bigger change. For now simply disable CPUFreq support for Tegra124 Chromebooks to avoid the hang when resuming from suspend. Fixes: 9a0baee960a7 ("ARM: tegra: Enable CPUFreq support for Tegra124 Chromebooks") Signed-off-by: Jon Hunter Signed-off-by: Olof Johansson --- diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index 40c23a0b7cfc..ec1aa64ded68 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -399,7 +399,7 @@ sdhci@0,700b0600 { /* eMMC on this bus */ /* CPU DFLL clock */ clock@0,70110000 { - status = "okay"; + status = "disabled"; vdd-cpu-supply = <&vdd_cpu>; nvidia,i2c-fs-rate = <400000>; };