From: Robert Jarzmik Date: Mon, 17 Nov 2008 19:29:04 +0000 (+0100) Subject: [ARM] pxa/MioA701: bluetooth resume fix X-Git-Tag: v2.6.28-rc7~38^2~4 X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=844c6f6a36984c5fe1bcc2d68a88f2ed212d1eef;p=linux.git [ARM] pxa/MioA701: bluetooth resume fix The G3IPL expects the value at RAM address 0xa020b020 to be exactly 1 to setup the bluetooth GPIOs properly. The actual code got a value from gpio_get_value() which was not 1, but a "not equal to 0" integer. Signed-off-by: Robert Jarzmik Acked-by: Russell King Signed-off-by: Eric Miao --- diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 0842c531ee4d..782903fe9c6c 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -565,7 +565,7 @@ static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state) u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR); /* Devices prepare suspend */ - is_bt_on = gpio_get_value(GPIO83_BT_ON); + is_bt_on = !!gpio_get_value(GPIO83_BT_ON); pxa2xx_mfp_set_lpm(GPIO83_BT_ON, is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);