From: Heiner Kallweit <hkallweit1@gmail.com>
Date: Fri, 9 Nov 2018 17:55:50 +0000 (+0100)
Subject: net: phy: don't set state PHY_CHANGELINK in phy_change
X-Git-Tag: v5.0-rc1~129^2~327^2~2
X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=8deeb6309cc447b9b35939558f18e2164dd110df;p=linux.git

net: phy: don't set state PHY_CHANGELINK in phy_change

State PHY_CHANGELINK isn't needed here, we can call the state machine
directly. We just have to remove the check for phy_polling_mode() to
make this work also in interrupt mode. Removing this check doesn't
cause any overhead because when not polling the state machine is
called only if required by some event.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 8dac890f32bf..da41420dfd11 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -738,11 +738,6 @@ static irqreturn_t phy_change(struct phy_device *phydev)
 				goto phy_err;
 	}
 
-	mutex_lock(&phydev->lock);
-	if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state))
-		phydev->state = PHY_CHANGELINK;
-	mutex_unlock(&phydev->lock);
-
 	/* reschedule state queue work to run as soon as possible */
 	phy_trigger_machine(phydev);
 
@@ -946,9 +941,6 @@ void phy_state_machine(struct work_struct *work)
 		break;
 	case PHY_NOLINK:
 	case PHY_RUNNING:
-		if (!phy_polling_mode(phydev))
-			break;
-		/* fall through */
 	case PHY_CHANGELINK:
 	case PHY_RESUMING:
 		err = phy_check_link_status(phydev);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 59bb31ee132f..7db07e69c88f 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -298,7 +298,7 @@ struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
  * - timer moves to NOLINK or RUNNING
  *
  * NOLINK: PHY is up, but not currently plugged in.
- * - If the timer notes that the link comes back, we move to RUNNING
+ * - irq or timer will set RUNNING if link comes back
  * - phy_stop moves to HALTED
  *
  * FORCING: PHY is being configured with forced settings
@@ -309,10 +309,7 @@ struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
  *
  * RUNNING: PHY is currently up, running, and possibly sending
  * and/or receiving packets
- * - timer will set CHANGELINK if we're polling (this ensures the
- *   link state is polled every other cycle of this state machine,
- *   which makes it every other second)
- * - irq will set CHANGELINK
+ * - irq or timer will set NOLINK if link goes down
  * - phy_stop moves to HALTED
  *
  * CHANGELINK: PHY experienced a change in link state