From: Florian Fainelli Date: Mon, 24 Feb 2020 23:56:32 +0000 (-0800) Subject: net: dsa: bcm_sf2: Forcibly configure IMP port for 1Gb/sec X-Git-Tag: v5.6-rc4~12^2~21 X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=98c5f7d44fef309e692c24c6d71131ee0f0871fb;p=linux.git net: dsa: bcm_sf2: Forcibly configure IMP port for 1Gb/sec We are still experiencing some packet loss with the existing advanced congestion buffering (ACB) settings with the IMP port configured for 2Gb/sec, so revert to conservative link speeds that do not produce packet loss until this is resolved. Fixes: 8f1880cbe8d0 ("net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec") Fixes: de34d7084edd ("net: dsa: bcm_sf2: Only 7278 supports 2Gb/sec IMP port") Signed-off-by: Florian Fainelli Reviewed-by: Vivien Didelot Signed-off-by: David S. Miller --- diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index d1955543acd1..b0f5280a83cb 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -69,8 +69,7 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port) /* Force link status for IMP port */ reg = core_readl(priv, offset); reg |= (MII_SW_OR | LINK_STS); - if (priv->type == BCM7278_DEVICE_ID) - reg |= GMII_SPEED_UP_2G; + reg &= ~GMII_SPEED_UP_2G; core_writel(priv, reg, offset); /* Enable Broadcast, Multicast, Unicast forwarding to IMP port */