From: Sean Nyekjaer Date: Fri, 27 Jan 2017 07:46:23 +0000 (+0100) Subject: net: phy: micrel: add support for KSZ8795 X-Git-Tag: v4.10-rc6~8^2~1 X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=9d162ed69f51cbd9ee5a0c7e82aba7acc96362ff;p=linux.git net: phy: micrel: add support for KSZ8795 This is adds support for the PHYs in the KSZ8795 5port managed switch. It will allow to detect the link between the switch and the soc and uses the same read_status functions as the KSZ8873MLL switch. Signed-off-by: Sean Nyekjaer Signed-off-by: David S. Miller --- diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 9a77289109b7..e55809c5beb7 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -1008,6 +1008,20 @@ static struct phy_driver ksphy_driver[] = { .get_stats = kszphy_get_stats, .suspend = genphy_suspend, .resume = genphy_resume, +}, { + .phy_id = PHY_ID_KSZ8795, + .phy_id_mask = MICREL_PHY_ID_MASK, + .name = "Micrel KSZ8795", + .features = (SUPPORTED_Pause | SUPPORTED_Asym_Pause), + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = kszphy_config_init, + .config_aneg = ksz8873mll_config_aneg, + .read_status = ksz8873mll_read_status, + .get_sset_count = kszphy_get_sset_count, + .get_strings = kszphy_get_strings, + .get_stats = kszphy_get_stats, + .suspend = genphy_suspend, + .resume = genphy_resume, } }; module_phy_driver(ksphy_driver); diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h index 257173e0095e..f541da68d1e7 100644 --- a/include/linux/micrel_phy.h +++ b/include/linux/micrel_phy.h @@ -35,6 +35,8 @@ #define PHY_ID_KSZ886X 0x00221430 #define PHY_ID_KSZ8863 0x00221435 +#define PHY_ID_KSZ8795 0x00221550 + /* struct phy_device dev_flags definitions */ #define MICREL_PHY_50MHZ_CLK 0x00000001 #define MICREL_PHY_FXEN 0x00000002