From: Sam Bobroff Date: Sun, 17 Nov 2019 23:53:53 +0000 (+1100) Subject: drm/radeon: fix bad DMA from INTERRUPT_CNTL2 X-Git-Tag: v5.6-rc1~114^2~21^2~206 X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=a542ad9e5de132cbb3e75b89008d44327a0d44d7;p=linux.git drm/radeon: fix bad DMA from INTERRUPT_CNTL2 The INTERRUPT_CNTL2 register expects a valid DMA address, but is currently set with a GPU MC address. This can cause problems on systems that detect the resulting DMA read from an invalid address (found on a Power8 guest). Instead, use the DMA address of the dummy page because it will always be safe. Fixes: d8f60cfc9345 ("drm/radeon/kms: Add support for interrupts on r6xx/r7xx chips (v3)") Fixes: 25a857fbe973 ("drm/radeon/kms: add support for interrupts on SI") Fixes: a59781bbe528 ("drm/radeon: add support for interrupts on CIK (v5)") Signed-off-by: Sam Bobroff Signed-off-by: Alex Deucher --- diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c index daff9a2af3be..acabeaf28732 100644 --- a/drivers/gpu/drm/radeon/cik.c +++ b/drivers/gpu/drm/radeon/cik.c @@ -6965,8 +6965,8 @@ static int cik_irq_init(struct radeon_device *rdev) } /* setup interrupt control */ - /* XXX this should actually be a bus address, not an MC address. same on older asics */ - WREG32(INTERRUPT_CNTL2, rdev->ih.gpu_addr >> 8); + /* set dummy read address to dummy page address */ + WREG32(INTERRUPT_CNTL2, rdev->dummy_page.addr >> 8); interrupt_cntl = RREG32(INTERRUPT_CNTL); /* IH_DUMMY_RD_OVERRIDE=0 - dummy read disabled with msi, enabled without msi * IH_DUMMY_RD_OVERRIDE=1 - dummy read controlled by IH_DUMMY_RD_EN diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index e937cc01910d..033bc466a862 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -3696,8 +3696,8 @@ int r600_irq_init(struct radeon_device *rdev) } /* setup interrupt control */ - /* set dummy read address to ring address */ - WREG32(INTERRUPT_CNTL2, rdev->ih.gpu_addr >> 8); + /* set dummy read address to dummy page address */ + WREG32(INTERRUPT_CNTL2, rdev->dummy_page.addr >> 8); interrupt_cntl = RREG32(INTERRUPT_CNTL); /* IH_DUMMY_RD_OVERRIDE=0 - dummy read disabled with msi, enabled without msi * IH_DUMMY_RD_OVERRIDE=1 - dummy read controlled by IH_DUMMY_RD_EN diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 05894d198a79..1d8efb0eefdb 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -5997,8 +5997,8 @@ static int si_irq_init(struct radeon_device *rdev) } /* setup interrupt control */ - /* set dummy read address to ring address */ - WREG32(INTERRUPT_CNTL2, rdev->ih.gpu_addr >> 8); + /* set dummy read address to dummy page address */ + WREG32(INTERRUPT_CNTL2, rdev->dummy_page.addr >> 8); interrupt_cntl = RREG32(INTERRUPT_CNTL); /* IH_DUMMY_RD_OVERRIDE=0 - dummy read disabled with msi, enabled without msi * IH_DUMMY_RD_OVERRIDE=1 - dummy read controlled by IH_DUMMY_RD_EN