From: Michal Simek <michal.simek@xilinx.com>
Date: Mon, 12 Mar 2018 15:12:33 +0000 (+0100)
Subject: arm64: dts: zynqmp: Use serdev for zcu100 BT
X-Git-Tag: v4.19-rc1~44^2~28^2~3
X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=a5c2ed48299aeaa92cf297750fc89227d59fd05b;p=linux.git

arm64: dts: zynqmp: Use serdev for zcu100 BT

Mainline started to use serdev interface for uart attached devices.
Change description to reflect it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index 3e862a9faf26..c7f713c8e69e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -89,12 +89,6 @@ vbus_det { /* U5 USB5744 VBUS detection via MIO25 */
 			gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
-
-		bt_power {
-			label = "bt_power";
-			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
 	};
 
 	wmmcsdio_fixed: fixedregulator-mmcsdio {
@@ -267,6 +261,10 @@ &spi1 { /* High Speed connector */
 
 &uart0 {
 	status = "okay";
+	bluetooth {
+		compatible = "ti,wl1831-st";
+		enable-gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &uart1 {