From: Michael Walle Date: Tue, 15 Nov 2016 10:13:16 +0000 (+0100) Subject: mmc: sdhci-of-esdhc: fixup PRESENT_STATE read X-Git-Tag: v4.9-rc7~18^2~1 X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=b0921d5c9ed6ffa8a4d6afc5ee5f136b87445f14;p=linux.git mmc: sdhci-of-esdhc: fixup PRESENT_STATE read Since commit 87a18a6a5652 ("mmc: mmc: Use ->card_busy() to detect busy cards in __mmc_switch()") the ESDHC driver is broken: mmc0: Card stuck in programming state! __mmc_switch mmc0: error -110 whilst initialising MMC card Since this commit __mmc_switch() uses ->card_busy(), which is sdhci_card_busy() for the esdhc driver. sdhci_card_busy() uses the PRESENT_STATE register, specifically the DAT0 signal level bit. But the ESDHC uses a non-conformant PRESENT_STATE register, thus a read fixup is required to make the driver work again. Signed-off-by: Michael Walle Fixes: 87a18a6a5652 ("mmc: mmc: Use ->card_busy() to detect busy cards in __mmc_switch()") Acked-by: Yangbo Lu Acked-by: Adrian Hunter Cc: # v4.8+ Signed-off-by: Ulf Hansson --- diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index fb71c866eacc..1bb11e4a9fe5 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -66,6 +66,20 @@ static u32 esdhc_readl_fixup(struct sdhci_host *host, return ret; } } + /* + * The DAT[3:0] line signal levels and the CMD line signal level are + * not compatible with standard SDHC register. The line signal levels + * DAT[7:0] are at bits 31:24 and the command line signal level is at + * bit 23. All other bits are the same as in the standard SDHC + * register. + */ + if (spec_reg == SDHCI_PRESENT_STATE) { + ret = value & 0x000fffff; + ret |= (value >> 4) & SDHCI_DATA_LVL_MASK; + ret |= (value << 1) & SDHCI_CMD_LVL; + return ret; + } + ret = value; return ret; } diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 766df17fb7eb..2570455b219a 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -73,6 +73,7 @@ #define SDHCI_DATA_LVL_MASK 0x00F00000 #define SDHCI_DATA_LVL_SHIFT 20 #define SDHCI_DATA_0_LVL_MASK 0x00100000 +#define SDHCI_CMD_LVL 0x01000000 #define SDHCI_HOST_CONTROL 0x28 #define SDHCI_CTRL_LED 0x01