From: Shawn Nematbakhsh Date: Tue, 13 Jun 2017 17:53:26 +0000 (-0700) Subject: power: supply: sbs-battery: Don't needlessly set CAPACITY_MODE X-Git-Tag: v4.13-rc1~172^2 X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=bfa953d336cdd713f6968c85ca820ef22333dc35;p=linux.git power: supply: sbs-battery: Don't needlessly set CAPACITY_MODE According to the smart battery spec (1), the CAPACITY_MODE bit does not influence the value read from RelativeStateOfCharge(), so don't bother changing CAPACITY_MODE when doing such a read. (1) - Smart Battery Data Specification, Rev 1.1, Dec. 11, 1998 Signed-off-by: Shawn Nematbakhsh Reviewed-by: Guenter Roeck Signed-off-by: Sebastian Reichel --- diff --git a/drivers/power/supply/sbs-battery.c b/drivers/power/supply/sbs-battery.c index cdc1d71909a5..f7059459f0fb 100644 --- a/drivers/power/supply/sbs-battery.c +++ b/drivers/power/supply/sbs-battery.c @@ -438,6 +438,11 @@ static int sbs_get_battery_property(struct i2c_client *client, } else { if (psp == POWER_SUPPLY_PROP_STATUS) val->intval = POWER_SUPPLY_STATUS_UNKNOWN; + else if (psp == POWER_SUPPLY_PROP_CAPACITY) + /* sbs spec says that this can be >100 % + * even if max value is 100 % + */ + val->intval = min(ret, 100); else val->intval = 0; } @@ -548,12 +553,7 @@ static int sbs_get_battery_capacity(struct i2c_client *client, if (ret < 0) return ret; - if (psp == POWER_SUPPLY_PROP_CAPACITY) { - /* sbs spec says that this can be >100 % - * even if max value is 100 % */ - val->intval = min(ret, 100); - } else - val->intval = ret; + val->intval = ret; ret = sbs_set_battery_mode(client, mode); if (ret < 0) @@ -618,7 +618,6 @@ static int sbs_get_property(struct power_supply *psy, case POWER_SUPPLY_PROP_CHARGE_NOW: case POWER_SUPPLY_PROP_CHARGE_FULL: case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: - case POWER_SUPPLY_PROP_CAPACITY: ret = sbs_get_property_index(client, psp); if (ret < 0) break; @@ -646,6 +645,7 @@ static int sbs_get_property(struct power_supply *psy, case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG: case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + case POWER_SUPPLY_PROP_CAPACITY: ret = sbs_get_property_index(client, psp); if (ret < 0) break;