From: Thierry Reding <treding@nvidia.com>
Date: Wed, 23 Jan 2019 11:39:42 +0000 (+0100)
Subject: arm64: tegra: p3310: Use TEGRA186_ prefix for GPIO names
X-Git-Tag: v5.1-rc1~157^2~30^2~14
X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=caca0482e7ea2e90f8bebe5477ca625621e031a6;p=linux.git

arm64: tegra: p3310: Use TEGRA186_ prefix for GPIO names

The new prefix allows the GPIOs to be uniquely identified on a per-chip
basis, which makes it easier to distinguish Tegra186 specific GPIOs from
those of later chips such as Tegra194 which supports a very different
set of GPIOs.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---

diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index b539561e7877..89a2da46efae 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -34,7 +34,8 @@ memory {
 	ethernet@2490000 {
 		status = "okay";
 
-		phy-reset-gpios = <&gpio TEGRA_MAIN_GPIO(M, 4) GPIO_ACTIVE_LOW>;
+		phy-reset-gpios = <&gpio TEGRA186_MAIN_GPIO(M, 4)
+					 GPIO_ACTIVE_LOW>;
 		phy-handle = <&phy>;
 		phy-mode = "rgmii";
 
@@ -46,7 +47,8 @@ phy: phy@0 {
 				compatible = "ethernet-phy-ieee802.3-c22";
 				reg = <0x0>;
 				interrupt-parent = <&gpio>;
-				interrupts = <TEGRA_MAIN_GPIO(M, 5) IRQ_TYPE_LEVEL_LOW>;
+				interrupts = <TEGRA186_MAIN_GPIO(M, 5)
+					      IRQ_TYPE_LEVEL_LOW>;
 			};
 		};
 	};
@@ -91,8 +93,8 @@ i2c@31e0000 {
 
 	/* SDMMC1 (SD/MMC) */
 	sdhci@3400000 {
-		cd-gpios = <&gpio TEGRA_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_MAIN_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		cd-gpios = <&gpio TEGRA186_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA186_MAIN_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
 
 		vqmmc-supply = <&vddio_sdmmc1>;
 	};