From: H. Nikolaus Schaller Date: Fri, 20 Sep 2019 16:11:15 +0000 (+0200) Subject: DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again X-Git-Tag: v5.4-rc2~3^2~1^2~7^2 X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=f1f028ff89cb0d37db299d48e7b2ce19be040d52;p=linux.git DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again commit 6953c57ab172 "gpio: of: Handle SPI chipselect legacy bindings" did introduce logic to centrally handle the legacy spi-cs-high property in combination with cs-gpios. This assumes that the polarity of the CS has to be inverted if spi-cs-high is missing, even and especially if non-legacy GPIO_ACTIVE_HIGH is specified. The DTS for the GTA04 was orginally introduced under the assumption that there is no need for spi-cs-high if the gpio is defined with proper polarity GPIO_ACTIVE_HIGH. This was not a problem until gpiolib changed the interpretation of GPIO_ACTIVE_HIGH and missing spi-cs-high. The effect is that the missing spi-cs-high is now interpreted as CS being low (despite GPIO_ACTIVE_HIGH) which turns off the SPI interface when the panel is to be programmed by the panel driver. Therefore, we have to add the redundant and legacy spi-cs-high property to properly activate CS. Cc: stable@vger.kernel.org Signed-off-by: H. Nikolaus Schaller Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index b295f6fad2a5..954c216140ad 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -120,6 +120,7 @@ lcd: td028ttec1@0 { spi-max-frequency = <100000>; spi-cpol; spi-cpha; + spi-cs-high; backlight= <&backlight>; label = "lcd";