From: Archit Taneja Date: Thu, 25 Feb 2016 05:52:45 +0000 (+0530) Subject: dt-bindings: msm/hdmi: Add HDMI PHY bindings X-Git-Tag: v4.6-rc1~61^2~23^2~19 X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=f31d12af957356c19556f7f2efc4da6d2fd50628;p=linux.git dt-bindings: msm/hdmi: Add HDMI PHY bindings Add HDMI PHY bindings. Update the example to use HDMI PHY. Added a missing power-domains property in the HDMI core bindings. Also, simplified HDMI TX's DT node name in the example. Cc: devicetree@vger.kernel.org Cc: Rob Herring Signed-off-by: Archit Taneja Signed-off-by: Rob Clark Acked-by: Rob Herring --- diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt index 379ee2ea9a3d..b63f614e0c04 100644 --- a/Documentation/devicetree/bindings/display/msm/hdmi.txt +++ b/Documentation/devicetree/bindings/display/msm/hdmi.txt @@ -11,6 +11,7 @@ Required properties: - reg: Physical base address and length of the controller's registers - reg-names: "core_physical" - interrupts: The interrupt signal from the hdmi block. +- power-domains: Should be <&mmcc MDSS_GDSC>. - clocks: device clocks See ../clocks/clock-bindings.txt for details. - qcom,hdmi-tx-ddc-clk-gpio: ddc clk pin @@ -18,6 +19,8 @@ Required properties: - qcom,hdmi-tx-hpd-gpio: hpd pin - core-vdda-supply: phandle to supply regulator - hdmi-mux-supply: phandle to mux regulator +- phys: the phandle for the HDMI PHY device +- phy-names: the name of the corresponding PHY device Optional properties: - qcom,hdmi-tx-mux-en-gpio: hdmi mux enable pin @@ -27,15 +30,38 @@ Optional properties: - pinctrl-0: the default pinctrl state (active) - pinctrl-1: the "sleep" pinctrl state +HDMI PHY: +Required properties: +- compatible: Could be the following + * "qcom,hdmi-phy-8660" + * "qcom,hdmi-phy-8960" + * "qcom,hdmi-phy-8974" + * "qcom,hdmi-phy-8084" + * "qcom,hdmi-phy-8996" +- #phy-cells: Number of cells in a PHY specifier; Should be 0. +- reg: Physical base address and length of the registers of the PHY sub blocks. +- reg-names: The names of register regions. The following regions are required: + * "hdmi_phy" + * "hdmi_pll" + For HDMI PHY on msm8996, these additional register regions are required: + * "hdmi_tx_l0" + * "hdmi_tx_l1" + * "hdmi_tx_l3" + * "hdmi_tx_l4" +- power-domains: Should be <&mmcc MDSS_GDSC>. +- clocks: device clocks + See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details. +- core-vdda-supply: phandle to vdda regulator device node + Example: / { ... - hdmi: qcom,hdmi-tx-8960@4a00000 { + hdmi: hdmi@4a00000 { compatible = "qcom,hdmi-tx-8960"; reg-names = "core_physical"; - reg = <0x04a00000 0x1000>; + reg = <0x04a00000 0x2f0>; interrupts = ; power-domains = <&mmcc MDSS_GDSC>; clock-names = @@ -54,5 +80,21 @@ Example: pinctrl-names = "default", "sleep"; pinctrl-0 = <&hpd_active &ddc_active &cec_active>; pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>; + + phys = <&hdmi_phy>; + phy-names = "hdmi_phy"; + }; + + hdmi_phy: phy@4a00400 { + compatible = "qcom,hdmi-phy-8960"; + reg-names = "hdmi_phy", + "hdmi_pll"; + reg = <0x4a00400 0x60>, + <0x4a00500 0x100>; + #phy-cells = <0>; + power-domains = <&mmcc MDSS_GDSC>; + clock-names = "slave_iface_clk"; + clocks = <&mmcc HDMI_S_AHB_CLK>; + core-vdda-supply = <&pm8921_hdmi_mvs>; }; };