From: Martin Kaiser <martin@kaiser.cx>
Date: Thu, 1 Aug 2019 15:46:28 +0000 (+0200)
Subject: ARM: dts: imx25: mbimxsd25: native-mode is part of display-timings
X-Git-Tag: v5.4-rc1~184^2~15^2~16
X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=f32f77814925e8325cbca836328b2f467bc24996;p=linux.git

ARM: dts: imx25: mbimxsd25: native-mode is part of display-timings

Move the native-mode property inside the display-timings node.

According to
Documentation/devicetree/bindings/display/panel/display-timing.txt.
native-mode is a property of the display-timings node.

If it's located outside of display-timings, the native-mode setting is
ignored and the first display timing is used (which is a problem only if
someone adds another display timing).

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
index d60d8f464ca9..24027a1fb46d 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
@@ -14,8 +14,8 @@ dvi_vga: display {
 		bits-per-pixel = <16>;
 		fsl,pcr = <0xfa208b80>;
 		bus-width = <18>;
-		native-mode = <&dvi_vga_timings>;
 		display-timings {
+			native-mode = <&dvi_vga_timings>;
 			dvi_vga_timings: 640x480 {
 				clock-frequency = <31250000>;
 				hactive = <640>;