From: Pascal PAILLET-LME
Date: Tue, 19 Feb 2019 10:04:33 +0000 (+0000)
Subject: dt-bindings: regulator: remove regulator pull-down support for stpmic1
X-Git-Tag: v5.1-rc1~182^2^2~46
X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=f369788894a483f9e703b13c0841ee0069eed758;p=linux.git
dt-bindings: regulator: remove regulator pull-down support for stpmic1
Regulator high pull down are enabled by default so remove support in the
driver.
Signed-off-by: Pascal Paillet
Signed-off-by: Mark Brown
---
diff --git a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt
index de27897d3f3a..bf9385b11da6 100644
--- a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt
@@ -23,8 +23,6 @@ Switches are fixed voltage regulators with only enable/disable capability.
Optional properties:
- st,mask-reset: mask reset for this regulator: the regulator configuration
is maintained during pmic reset.
-- regulator-pull-down: enable high pull down
- if not specified light pull down is used
- regulator-over-current-protection:
if set, all regulators are switched off in case of over-current detection
on this regulator,