From: Heiko Stuebner <heiko@sntech.de>
Date: Wed, 30 Sep 2015 18:58:53 +0000 (+0200)
Subject: ARM: dts: rockchip: add rk3288-popmetal mmc supplies
X-Git-Tag: v4.4-rc1~51^2~57^2~5
X-Git-Url: https://asedeno.scripts.mit.edu/gitweb/?a=commitdiff_plain;h=fa1c193261199f4717879e02ea4a3e8181e1b512;p=linux.git

ARM: dts: rockchip: add rk3288-popmetal mmc supplies

Add missing regulators and supply properties to emmc and sdmmc nodes.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---

diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index f82b956ebf17..b677611a710f 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -86,6 +86,26 @@ ir: ir-receiver {
 		pinctrl-0 = <&ir_int>;
 	};
 
+	vcc_flash: flash-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_flash";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
 	vcc_sys: vsys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
@@ -109,6 +129,8 @@ &emmc {
 	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_flash>;
 	status = "okay";
 };
 
@@ -121,6 +143,8 @@ &sdmmc {
 	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
 	status = "okay";
 };
 
@@ -405,6 +429,12 @@ pmic_int: pmic-int {
 			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
+
+	sdmmc {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &tsadc {