Jens Axboe [Mon, 18 Nov 2019 15:35:47 +0000 (08:35 -0700)]
Revert "bcache: fix fifo index swapping condition in journal_pin_cmp()"
Coly says:
"Guoju Fang talked to me today, he told me this change was unnecessary
and I was over-thought.
Then I realize fifo_idx() uses a mask to handle the array index overflow
condition, so the index swap in journal_pin_cmp() won't happen. And yes,
Guoju and Kent are correct.
Since you already applied this patch, can you please to remove this
patch from your for-next branch? This single patch does not break
thing, but it is unecessary at this moment."
Jens Axboe [Fri, 15 Nov 2019 05:58:45 +0000 (22:58 -0700)]
Merge branch 'md-next' of git://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-5.5/drivers
Pull MD changes from Song.
* 'md-next' of git://git.kernel.org/pub/scm/linux/kernel/git/song/md:
drivers/md/raid5-ppl.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET
drivers/md/raid5.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET
Coly Li [Wed, 13 Nov 2019 08:03:24 +0000 (16:03 +0800)]
bcache: at least try to shrink 1 node in bch_mca_scan()
In bch_mca_scan(), the number of shrinking btree node is calculated
by code like this,
unsigned long nr = sc->nr_to_scan;
nr /= c->btree_pages;
nr = min_t(unsigned long, nr, mca_can_free(c));
variable sc->nr_to_scan is number of objects (here is bcache B+tree
nodes' number) to shrink, and pointer variable sc is sent from memory
management code as parametr of a callback.
If sc->nr_to_scan is smaller than c->btree_pages, after the above
calculation, variable 'nr' will be 0 and nothing will be shrunk. It is
frequeently observed that only 1 or 2 is set to sc->nr_to_scan and make
nr to be zero. Then bch_mca_scan() will do nothing more then acquiring
and releasing mutex c->bucket_lock.
This patch checkes whether nr is 0 after the above calculation, if 0
is the result then set 1 to variable 'n'. Then at least bch_mca_scan()
will try to shrink a single B+tree node.
Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
For writeback mode, if there is no regular I/O request for a while,
the writeback rate will be set to the maximum value (1TB/s for now).
This is good for most of the storage workload, but there are still
people don't what the maximum writeback rate in I/O idle time.
This patch adds a sysfs interface file idle_max_writeback_rate to
permit people to disable maximum writeback rate. Then the minimum
writeback rate can be advised by writeback_rate_minimum in the
bcache device's sysfs interface.
Reported-by: Christian Balzer <chibi@gol.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Coly Li [Wed, 13 Nov 2019 08:03:22 +0000 (16:03 +0800)]
bcache: add code comments in bch_btree_leaf_dirty()
This patch adds code comments in bch_btree_leaf_dirty() to explain
why w->journal should always reference the eldest journal pin of
all the writing bkeys in the btree node. To make the bcache journal
code to be easier to be understood.
Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Coly Li [Wed, 13 Nov 2019 08:03:19 +0000 (16:03 +0800)]
bcache: deleted code comments for dead code in bch_data_insert_keys()
In request.c:bch_data_insert_keys(), there is code comment for a piece
of dead code. This patch deletes the dead code and its code comment
since they are useless in practice.
Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Coly Li [Wed, 13 Nov 2019 08:03:18 +0000 (16:03 +0800)]
bcache: add more accurate error messages in read_super()
Previous code only returns "Not a bcache superblock" for both bcache
super block offset and magic error. This patch addss more accurate error
messages,
- for super block unmatched offset:
"Not a bcache superblock (bad offset)"
- for super block unmatched magic number:
"Not a bcache superblock (bad magic)"
Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Guoju Fang [Wed, 13 Nov 2019 08:03:16 +0000 (16:03 +0800)]
bcache: fix a lost wake-up problem caused by mca_cannibalize_lock
This patch fix a lost wake-up problem caused by the race between
mca_cannibalize_lock and bch_cannibalize_unlock.
Consider two processes, A and B. Process A is executing
mca_cannibalize_lock, while process B takes c->btree_cache_alloc_lock
and is executing bch_cannibalize_unlock. The problem happens that after
process A executes cmpxchg and will execute prepare_to_wait. In this
timeslice process B executes wake_up, but after that process A executes
prepare_to_wait and set the state to TASK_INTERRUPTIBLE. Then process A
goes to sleep but no one will wake up it. This problem may cause bcache
device to dead.
Coly Li [Wed, 13 Nov 2019 08:03:15 +0000 (16:03 +0800)]
bcache: fix fifo index swapping condition in journal_pin_cmp()
Fifo structure journal.pin is implemented by a cycle buffer, if the back
index reaches highest location of the cycle buffer, it will be swapped
to 0. Once the swapping happens, it means a smaller fifo index might be
associated to a newer journal entry. So the btree node with oldest
journal entry won't be selected in bch_btree_leaf_dirty() to reference
the dirty B+tree leaf node. This problem may cause bcache journal won't
protect unflushed oldest B+tree dirty leaf node in power failure, and
this B+tree leaf node is possible to beinconsistent after reboot from
power failure.
This patch fixes the fifo index comparing logic in journal_pin_cmp(),
to avoid potential corrupted B+tree leaf node when the back index of
journal pin is swapped.
Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
John Pittman [Tue, 12 Nov 2019 00:43:20 +0000 (16:43 -0800)]
md/raid10: prevent access of uninitialized resync_pages offset
Due to unneeded multiplication in the out_free_pages portion of
r10buf_pool_alloc(), when using a 3-copy raid10 layout, it is
possible to access a resync_pages offset that has not been
initialized. This access translates into a crash of the system
within resync_free_pages() while passing a bad pointer to
put_page(). Remove the multiplication, preventing access to the
uninitialized area.
Fixes: f0250618361db ("md: raid10: don't use bio's vec table to manage resync pages") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: John Pittman <jpittman@redhat.com> Suggested-by: David Jeffery <djeffery@redhat.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
Jens Axboe [Thu, 7 Nov 2019 13:33:05 +0000 (06:33 -0700)]
Merge branch 'for-5.5/block' into for-5.5/drivers
Pull in dependencies for the new zoned open/close/finish support.
* for-5.5/block: (32 commits)
block: add zone open, close and finish ioctl support
block: add zone open, close and finish operations
block: Simplify REQ_OP_ZONE_RESET_ALL handling
block: Remove REQ_OP_ZONE_RESET plugging
block: Warn if elevator= parameter is used
block: avoid blk_bio_segment_split for small I/O operations
blk-mq: make sure that line break can be printed
block: sed-opal: Introduce Opal Datastore UID
block: sed-opal: Add support to read/write opal tables generically
block: sed-opal: Generalizing write data to any opal table
bdev: Refresh bdev size for disks without partitioning
bdev: Factor out bdev revalidation into a common helper
blk-mq: avoid sysfs buffer overflow with too many CPU cores
blk-mq: Make blk_mq_run_hw_queue() return void
fcntl: fix typo in RWH_WRITE_LIFE_NOT_SET r/w hint name
blk-mq: fill header with kernel-doc
blk-mq: remove needless goto from blk_mq_get_driver_tag
block: reorder bio::__bi_remaining for better packing
block: Reduce the amount of memory used for tag sets
block: Reduce the amount of memory required per request queue
...
Ajay Joshi [Sun, 27 Oct 2019 14:05:46 +0000 (23:05 +0900)]
block: add zone open, close and finish ioctl support
Introduce three new ioctl commands BLKOPENZONE, BLKCLOSEZONE and
BLKFINISHZONE to allow applications to control the condition of zones
on a zoned block device through the execution of the REQ_OP_ZONE_OPEN,
REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH operations.
Contains contributions from Matias Bjorling, Hans Holmberg,
Dmitry Fomichev, Keith Busch, Damien Le Moal and Christoph Hellwig.
Reviewed-by: Javier González <javier@javigon.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com> Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com> Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ajay Joshi [Sun, 27 Oct 2019 14:05:45 +0000 (23:05 +0900)]
block: add zone open, close and finish operations
Zoned block devices (ZBC and ZAC devices) allow an explicit control
over the condition (state) of zones. The operations allowed are:
* Open a zone: Transition to open condition to indicate that a zone will
actively be written
* Close a zone: Transition to closed condition to release the drive
resources used for writing to a zone
* Finish a zone: Transition an open or closed zone to the full
condition to prevent write operations
To enable this control for in-kernel zoned block device users, define
the new request operations REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE
and REQ_OP_ZONE_FINISH as well as the generic function
blkdev_zone_mgmt() for submitting these operations on a range of zones.
This results in blkdev_reset_zones() removal and replacement with this
new zone magement function. Users of blkdev_reset_zones() (f2fs and
dm-zoned) are updated accordingly.
Contains contributions from Matias Bjorling, Hans Holmberg,
Dmitry Fomichev, Keith Busch, Damien Le Moal and Christoph Hellwig.
Reviewed-by: Javier González <javier@javigon.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com> Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com> Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Sun, 27 Oct 2019 14:05:43 +0000 (23:05 +0900)]
block: Simplify REQ_OP_ZONE_RESET_ALL handling
There is no need for the function __blkdev_reset_all_zones() as
REQ_OP_ZONE_RESET_ALL can be handled directly in blkdev_reset_zones()
bio loop with an early break from the loop. This patch removes this
function and modifies blkdev_reset_zones(), simplifying the code.
Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Sun, 27 Oct 2019 14:05:42 +0000 (23:05 +0900)]
block: Remove REQ_OP_ZONE_RESET plugging
REQ_OP_ZONE_RESET operations cannot be merged as these bios and requests
do not have a size and are never sequential due to the zone start sector
position required for their execution. As a result, there is no point in
using a plug around blkdev_reset_zones() bio issuing loop. This patch
removes this unnecessary plugging.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Javier González <javier@javigon.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jan Kara [Wed, 6 Nov 2019 10:48:57 +0000 (11:48 +0100)]
block: Warn if elevator= parameter is used
With transition to blk-mq, the elevator= kernel argument was removed as
it makes less and less sense with the current variety of devices. Since
this may surprise some users and there are advices on the Internet that
still suggest to use it, let's at least warn if the parameter is used.
Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prabhath Sajeepa [Mon, 28 Oct 2019 22:56:48 +0000 (16:56 -0600)]
nvme: Fix parsing of ANA log page
Check validity of offset into ANA log buffer before accessing
nvme_ana_group_desc. This check ensures the size of ANA log buffer >=
offset + sizeof(nvme_ana_group_desc)
nvmet: add plugging for read/write when ns is bdev
With reference to the following issue reported on the mailing list :-
http://lists.infradead.org/pipermail/linux-nvme/2019-October/027604.html
this patch adds plugging for the bdev-ns under nvmet_bdev_execute_rw().
We can see the following performance improvement in random write
workload I/Os with the setup described in the link when device_path
configured as /dev/md0.
nvmet: Introduce common execute function for get_log_page and identify
Instead of picking the sub-command handler to execute in a nested
switch statement introduce a landing functions that calls out
to the appropriate sub-command handler.
This will allow us to have a common place in the handler to check
the transfer length in a future patch.
Damien Le Moal [Mon, 21 Oct 2019 03:40:04 +0000 (12:40 +0900)]
nvme: Introduce nvme_lba_to_sect()
Introduce the new helper function nvme_lba_to_sect() to convert a device
logical block number to a 512B sector number. Use this new helper in
obvious places, cleaning up the code.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Mon, 21 Oct 2019 03:40:03 +0000 (12:40 +0900)]
nvme: Cleanup and rename nvme_block_nr()
Rename nvme_block_nr() to nvme_sect_to_lba() and use SECTOR_SHIFT
instead of its hard coded value 9. Also add a comment to decribe this
helper.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Max Gurtovoy [Sun, 13 Oct 2019 16:57:36 +0000 (19:57 +0300)]
nvme: move common call to nvme_cleanup_cmd to core layer
nvme_cleanup_cmd should be called for each call to nvme_setup_cmd
(symmetrical functions). Move the call for nvme_cleanup_cmd to the common
core layer and call it during nvme_complete_rq for the good flow. For
error flow, each transport will call nvme_cleanup_cmd independently. Also
take care of a special case of path failure, where we call
nvme_complete_rq without doing nvme_setup_cmd.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Max Gurtovoy [Sun, 13 Oct 2019 16:57:35 +0000 (19:57 +0300)]
nvme: introduce "Command Aborted By host" status code
Fix the status code of canceled requests initiated by the host according
to TP4028 (Status Code 0x371):
"Command Aborted By host: The command was aborted as a result of host
action (e.g., the host disconnected the Fabric connection)."
Also in a multipath environment, unless otherwise specified, errors of
this type (path related) should be retried using a different path, if
one is available.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Israel Rukshin [Sun, 13 Oct 2019 16:57:34 +0000 (19:57 +0300)]
nvmet-rdma: add unlikely check at nvmet_rdma_map_sgl_keyed
The calls to nvmet_req_alloc_sgl and rdma_rw_ctx_init should usually
succeed, so add this simple optimization to the fast path.
Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Israel Rukshin [Sun, 13 Oct 2019 16:57:33 +0000 (19:57 +0300)]
nvmet: add unlikely check at nvmet_req_alloc_sgl
The call to sgl_alloc shouldn't fail so add this simple optimization to
the fast path.
Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Israel Rukshin [Sun, 13 Oct 2019 16:57:32 +0000 (19:57 +0300)]
nvmet: use bio_io_error instead of duplicating it
This commit doesn't change any logic.
Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Israel Rukshin [Sun, 13 Oct 2019 16:57:31 +0000 (19:57 +0300)]
nvme: introduce nvme_is_aen_req function
This function improves code readability and reduces code duplication.
Signed-off-by: Israel Rukshin <israelr@mellanox.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Mon, 4 Nov 2019 08:26:53 +0000 (16:26 +0800)]
blk-mq: make sure that line break can be printed
8962842ca5ab ("blk-mq: avoid sysfs buffer overflow with too many CPU cores")
avoids sysfs buffer overflow, and reserves one character for line break.
However, the last snprintf() doesn't get correct 'size' parameter passed
in, so fixed it.
Fixes: 8962842ca5ab ("blk-mq: avoid sysfs buffer overflow with too many CPU cores") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
block: sed-opal: Add support to read/write opal tables generically
This feature gives the user RW access to any opal table with admin1
authority. The flags described in the new structure determines if the user
wants to read/write the data. Flags are checked for valid values in
order to allow future features to be added to the ioctl.
The user can provide the desired table's UID. Also, the ioctl provides a
size and offset field and internally will loop data accesses to return
the full data block. Read overrun is prevented by the initiator's
sec_send_recv() backend. The ioctl provides a private field with the
intention to accommodate any future expansions to the ioctl.
Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
block: sed-opal: Generalizing write data to any opal table
This patch refactors the existing "write_shadowmbr" func and
creates a new generalized function "generic_table_write_data",
to write data to any opal table. Also, a few cleanups are included
in this patch.
Reviewed-by: Scott Bauer <sbauer@plzdonthack.me> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jan Kara [Mon, 21 Oct 2019 08:38:00 +0000 (10:38 +0200)]
bdev: Refresh bdev size for disks without partitioning
Currently, block device size in not updated on second and further open
for block devices where partition scan is disabled. This is particularly
annoying for example for DVD drives as that means block device size does
not get updated once the media is inserted into a drive if the device is
already open when inserting the media. This is actually always the case
for example when pktcdvd is in use.
Fix the problem by revalidating block device size on every open even for
devices with partition scan disabled.
Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Sat, 2 Nov 2019 08:02:15 +0000 (16:02 +0800)]
blk-mq: avoid sysfs buffer overflow with too many CPU cores
It is reported that sysfs buffer overflow can be triggered if the system
has too many CPU cores(>841 on 4K PAGE_SIZE) when showing CPUs of
hctx via /sys/block/$DEV/mq/$N/cpu_list.
Use snprintf to avoid the potential buffer overflow.
This version doesn't change the attribute format, and simply stops
showing CPU numbers if the buffer is going to overflow.
Cc: stable@vger.kernel.org Fixes: 676141e48af7("blk-mq: don't dump CPU -> hw queue map on driver load") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Darrick J. Wong [Thu, 31 Oct 2019 03:29:48 +0000 (20:29 -0700)]
loop: fix no-unmap write-zeroes request behavior
Currently, if the loop device receives a WRITE_ZEROES request, it asks
the underlying filesystem to punch out the range. This behavior is
correct if unmapping is allowed. However, a NOUNMAP request means that
the caller doesn't want us to free the storage backing the range, so
punching out the range is incorrect behavior.
To satisfy a NOUNMAP | WRITE_ZEROES request, loop should ask the
underlying filesystem to FALLOC_FL_ZERO_RANGE, which is (according to
the fallocate documentation) required to ensure that the entire range is
backed by real storage, which suffices for our purposes.
Fixes: 19372e2769179dd ("loop: implement REQ_OP_WRITE_ZEROES") Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
John Garry [Tue, 29 Oct 2019 16:59:30 +0000 (00:59 +0800)]
blk-mq: Make blk_mq_run_hw_queue() return void
Since commit 97889f9ac24f ("blk-mq: remove synchronize_rcu() from
blk_mq_del_queue_tag_set()"), the return value of blk_mq_run_hw_queue()
is never checked, so make it return void, which very marginally simplifies
the code.
Reviewed-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
fcntl: fix typo in RWH_WRITE_LIFE_NOT_SET r/w hint name
According to commit message in the original commit c75b1d9421f8 ("fs:
add fcntl() interface for setting/getting write life time hints"),
as well as userspace library[1] and man page update[2], R/W hint constants
are intended to have RWH_* prefix. However, RWF_WRITE_LIFE_NOT_SET retained
"RWF_*" prefix used in the early versions of the proposed patch set[3].
Rename it and provide the old name as a synonym for the new one
for backward compatibility.
Fixes: c75b1d9421f8 ("fs: add fcntl() interface for setting/getting write life time hints") Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
André Almeida [Fri, 25 Oct 2019 20:16:51 +0000 (14:16 -0600)]
blk-mq: remove needless goto from blk_mq_get_driver_tag
The only usage of the label "done" is when (rq->tag != -1) at the
beginning of the function. Rather than jumping to label, we can just
remove this label and execute the code at the "if". Besides that, the
code that would be executed after the label "done" is the return of the
logical expression (rq->tag != -1) but since we are already inside the
if, we now that this is true. Remove the label and replace the goto with
the proper result of the label.
Signed-off-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Fri, 25 Oct 2019 16:50:10 +0000 (09:50 -0700)]
block: Reduce the amount of memory used for tag sets
Instead of allocating an array of size nr_cpu_ids for set->tags, allocate
an array of size set->nr_hw_queues. This patch improves behavior that was
introduced by commit 868f2f0b7206 ("blk-mq: dynamic h/w context count").
Reallocating tag sets from inside __blk_mq_update_nr_hw_queues() is safe
because:
- All request queues that share the tag sets are frozen before the tag sets
are reallocated.
- blk_mq_queue_tag_busy_iter() holds q->q_usage_counter while active and
hence is serialized against __blk_mq_update_nr_hw_queues().
Cc: Keith Busch <keith.busch@intel.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Fri, 25 Oct 2019 16:50:09 +0000 (09:50 -0700)]
block: Reduce the amount of memory required per request queue
Instead of always allocating at least nr_cpu_ids hardware queues per request
queue, reallocate q->queue_hw_ctx if it has to grow. This patch improves
behavior that was introduced by commit 868f2f0b7206 ("blk-mq: dynamic h/w
context count").
Cc: Keith Busch <keith.busch@intel.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Fri, 25 Oct 2019 16:50:08 +0000 (09:50 -0700)]
block: Remove the synchronize_rcu() call from __blk_mq_update_nr_hw_queues()
Since the blk_mq_{,un}freeze_queue() calls in __blk_mq_update_nr_hw_queues()
already serialize __blk_mq_update_nr_hw_queues() against
blk_mq_queue_tag_busy_iter(), the synchronize_rcu() call in
__blk_mq_update_nr_hw_queues() is not necessary. Hence remove it.
Note: the synchronize_rcu() call in __blk_mq_update_nr_hw_queues() was
introduced by commit f5bbbbe4d635 ("blk-mq: sync the update nr_hw_queues with
blk_mq_queue_tag_busy_iter"). Commit 530ca2c9bd69 ("blk-mq: Allow blocking
queue tag iter callbacks") removed the rcu_read_{,un}lock() calls that
correspond to the synchronize_rcu() call in __blk_mq_update_nr_hw_queues().
Reviewed-by: Ming Lei <ming.lei@redhat.com> Cc: Jianchao Wang <jianchao.w.wang@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Thu, 24 Oct 2019 22:31:57 +0000 (16:31 -0600)]
Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-5.5/drivers
Pull MD changes from Song.
* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: no longer compare spare disk superblock events in super_load
md: improve handling of bio with REQ_PREFLUSH in md_flush_request()
md/bitmap: avoid race window between md_bitmap_resize and bitmap_file_clear_bit
md/raid0: Fix an error message in raid0_make_request()
When we readd /dev/sda to the array, it started to do recovery.
After offline the other two disks in md1, the recovery have
been interrupted and superblock update info cannot be written
to the offline disks. While the spare disk (/dev/sda) can continue
to update superblock info.
After stopping the array and assemble it, we found the array
run fail, with the follow kernel message:
[ 172.986064] md: kicking non-fresh sdb from array!
[ 173.004210] md: kicking non-fresh sdc from array!
[ 173.022383] md/raid1:md1: active with 0 out of 4 mirrors
[ 173.022406] md1: failed to create bitmap (-5)
[ 173.023466] md: md1 stopped.
Since both sdb and sdc have the value of 'sb->events' smaller than
that in sda, they have been kicked from the array. However, the only
remained disk sda is in 'spare' state before stop and it cannot be
added to conf->mirrors[] array. In the end, raid array assemble
and run fail.
In fact, we can use the older disk sdb or sdc to assemble the array.
That means we should not choose the 'spare' disk as the fresh disk in
analyze_sbs().
To fix the problem, we do not compare superblock events when it is
a spare disk, as same as validate_super.
Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
David Jeffery [Mon, 16 Sep 2019 17:15:14 +0000 (13:15 -0400)]
md: improve handling of bio with REQ_PREFLUSH in md_flush_request()
If pers->make_request fails in md_flush_request(), the bio is lost. To
fix this, pass back a bool to indicate if the original make_request call
should continue to handle the I/O and instead of assuming the flush logic
will push it to completion.
Convert md_flush_request to return a bool and no longer calls the raid
driver's make_request function. If the return is true, then the md flush
logic has or will complete the bio and the md make_request call is done.
If false, then the md make_request function needs to keep processing like
it is a normal bio. Let the original call to md_handle_request handle any
need to retry sending the bio to the raid driver's make_request function
should it be needed.
Also mark md_flush_request and the make_request function pointer as
__must_check to issue warnings should these critical return values be
ignored.
Fixes: 2bc13b83e629 ("md: batch flush requests.") Cc: stable@vger.kernel.org # # v4.19+ Cc: NeilBrown <neilb@suse.com> Signed-off-by: David Jeffery <djeffery@redhat.com> Reviewed-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
And the procedure to keep resize bitmap safe is allocate new storage
space, then quiesce, copy bits, replace bitmap, and re-start.
However the daemon (bitmap_daemon_work) could happen even the array is
quiesced, which means when bitmap_file_clear_bit is triggered by raid1d,
then it thinks it should be fine to access store->filemap since
counts->lock is held, but resize could change the storage without the
protection of the lock.
Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Cc: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
Dan Carpenter [Sat, 21 Sep 2019 06:00:31 +0000 (09:00 +0300)]
md/raid0: Fix an error message in raid0_make_request()
The first argument to WARN() is supposed to be a condition. The
original code will just print the mdname() instead of the full warning
message.
Fixes: c84a1372df92 ("md/raid0: avoid RAID0 data corruption due to layout confusion.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Song Liu <songliubraving@fb.com>
A zoned block device maintains a write pointer within a zone, and reads
beyond the write pointer are undefined. Fill data buffer returned above
the write pointer with 0xFF.
Logan Gunthorpe [Thu, 10 Oct 2019 23:36:26 +0000 (17:36 -0600)]
block: account statistics for passthrough requests
Presently, passthrough requests are not accounted for because
blk_do_io_stat() expressly rejects them. Based on some digging
in the history, this doesn't seem like a concious decision but
one that evolved from the change from blk_fs_request() to
blk_rq_is_passthrough().
To support this, call blk_account_io_start() in blk_execute_rq_nowait()
and remove the passthrough check in blk_do_io_stat().
Pavel Begunkov [Mon, 7 Oct 2019 21:16:51 +0000 (00:16 +0300)]
blk-stat: Optimise blk_stat_add()
blk_stat_add() calls {get,put}_cpu_ptr() in a loop, which entails
overhead of disabling/enabling preemption. The loop is under RCU
(i.e.short) anyway, so do get_cpu() in advance.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
null_blk: Enable modifying 'submit_queues' after an instance has been configured
This patch makes it possible to test blk_mq_update_nr_hw_queues() from
inside a VM.
Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce a local variable to make the code easier to read. This patch
does not change any functionality but makes the next patch in this
series easier to read.
Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
block: Document all members of blk_mq_tag_set and bkl_mq_queue_map
The meaning of several member variables of these two data structures is
nontrivial. Hence document all member variables using the kernel-doc
syntax.
Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since blk_cleanup_queue() is called after blk_unregister_queue() and
since that last function removes all sysfs attributes, serializing
any code in blk_cleanup_queue() against sysfs callback methods nor against
I/O scheduler changes is necessary. Hence remove the syfs_lock locking
calls from the start of blk_cleanup_queue().
Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Block drivers must call del_gendisk() before blk_cleanup_queue().
del_gendisk() calls kobject_del() and kobject_del() waits until any
ongoing sysfs callback functions have finished. In other words, the
sysfs callback functions won't be called for a queue in the dying
state. Hence remove the "dying" checks from the sysfs callback
functions.
Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 897bb0c7f1ea ("blk-mq: Use proper cpumask iterator"; v4.6)
removed the last use of request_queue.nr_queues from outside
blk_mq_init_allocate_queue(). Remove this member variable to make
struct request_queue smaller. This patch does not change any
functionality.
Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
In file included from ./include/linux/bitmap.h:9,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/cpumask.h:5,
from ./arch/x86/include/asm/msr.h:11,
from ./arch/x86/include/asm/processor.h:21,
from ./arch/x86/include/asm/cpufeature.h:5,
from ./arch/x86/include/asm/thread_info.h:53,
from ./include/linux/thread_info.h:38,
from ./arch/x86/include/asm/preempt.h:7,
from ./include/linux/preempt.h:78,
from ./include/linux/spinlock.h:51,
from ./include/linux/mmzone.h:8,
from ./include/linux/gfp.h:6,
from ./include/linux/mm.h:10,
from ./include/linux/bvec.h:13,
from ./include/linux/blk_types.h:10,
from block/blk-wbt.c:23:
In function 'strncpy',
inlined from 'perf_trace_wbt_stat' at ./include/trace/events/wbt.h:15:1:
./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
return __builtin_strncpy(p, q, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'strncpy',
inlined from 'perf_trace_wbt_lat' at ./include/trace/events/wbt.h:58:1:
./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
return __builtin_strncpy(p, q, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'strncpy',
inlined from 'perf_trace_wbt_step' at ./include/trace/events/wbt.h:87:1:
./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
return __builtin_strncpy(p, q, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'strncpy',
inlined from 'perf_trace_wbt_timer' at ./include/trace/events/wbt.h:126:1:
./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
return __builtin_strncpy(p, q, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'strncpy',
inlined from 'trace_event_raw_event_wbt_stat' at ./include/trace/events/wbt.h:15:1:
./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
return __builtin_strncpy(p, q, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'strncpy',
inlined from 'trace_event_raw_event_wbt_lat' at ./include/trace/events/wbt.h:58:1:
./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
return __builtin_strncpy(p, q, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'strncpy',
inlined from 'trace_event_raw_event_wbt_timer' at ./include/trace/events/wbt.h:126:1:
./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
return __builtin_strncpy(p, q, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'strncpy',
inlined from 'trace_event_raw_event_wbt_step' at ./include/trace/events/wbt.h:87:1:
./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
return __builtin_strncpy(p, q, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Fixes: e34cbd307477 ("blk-wbt: add general throttling mechanism"; v4.10). Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
block/t10-pi.c:242: warning: Function parameter or member 'rq' not described in 't10_pi_type3_prepare'
block/t10-pi.c:249: warning: Function parameter or member 'rq' not described in 't10_pi_type3_complete'
block/t10-pi.c:249: warning: Function parameter or member 'nr_bytes' not described in 't10_pi_type3_complete'
Cc: Max Gurtovoy <maxg@mellanox.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Fixes: 54d4e6ab91eb ("block: centralize PI remapping logic to the block layer") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Sun, 6 Oct 2019 20:53:27 +0000 (13:53 -0700)]
elf: don't use MAP_FIXED_NOREPLACE for elf executable mappings
In commit 4ed28639519c ("fs, elf: drop MAP_FIXED usage from elf_map") we
changed elf to use MAP_FIXED_NOREPLACE instead of MAP_FIXED for the
executable mappings.
Then, people reported that it broke some binaries that had overlapping
segments from the same file, and commit ad55eac74f20 ("elf: enforce
MAP_FIXED on overlaying elf segments") re-instated MAP_FIXED for some
overlaying elf segment cases. But only some - despite the summary line
of that commit, it only did it when it also does a temporary brk vma for
one obvious overlapping case.
Now Russell King reports another overlapping case with old 32-bit x86
binaries, which doesn't trigger that limited case. End result: we had
better just drop MAP_FIXED_NOREPLACE entirely, and go back to MAP_FIXED.
Yes, it's a sign of old binaries generated with old tool-chains, but we
do pride ourselves on not breaking existing setups.
This still leaves MAP_FIXED_NOREPLACE in place for the load_elf_interp()
and the old load_elf_library() use-cases, because nobody has reported
breakage for those. Yet.
Note that in all the cases seen so far, the overlapping elf sections
seem to be just re-mapping of the same executable with different section
attributes. We could possibly introduce a new MAP_FIXED_NOFILECHANGE
flag or similar, which acts like NOREPLACE, but allows just remapping
the same executable file using different protection flags.
It's not clear that would make a huge difference to anything, but if
people really hate that "elf remaps over previous maps" behavior, maybe
at least a more limited form of remapping would alleviate some concerns.
Alternatively, we should take a look at our elf_map() logic to see if we
end up not mapping things properly the first time.
In the meantime, this is the minimal "don't do that then" patch while
people hopefully think about it more.
Reported-by: Russell King <linux@armlinux.org.uk> Fixes: 4ed28639519c ("fs, elf: drop MAP_FIXED usage from elf_map") Fixes: ad55eac74f20 ("elf: enforce MAP_FIXED on overlaying elf segments") Cc: Michal Hocko <mhocko@suse.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 6 Oct 2019 18:10:15 +0000 (11:10 -0700)]
Merge tag 'dma-mapping-5.4-1' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping regression fix from Christoph Hellwig:
"Revert an incorret hunk from a patch that caused problems on various
arm boards (Andrey Smirnov)"
* tag 'dma-mapping-5.4-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: fix false positive warnings in dma_common_free_remap()
Linus Torvalds [Sun, 6 Oct 2019 00:18:43 +0000 (17:18 -0700)]
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A few fixes this time around:
- Fixup of some clock specifications for DRA7 (device-tree fix)
- Removal of some dead/legacy CPU OPP/PM code for OMAP that throws
warnings at boot
- A few more minor fixups for OMAPs, most around display
- Enable STM32 QSPI as =y since their rootfs sometimes comes from
there
- Switch CONFIG_REMOTEPROC to =y since it went from tristate to bool
- Fix of thermal zone definition for ux500 (5.4 regression)"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: multi_v7_defconfig: Fix SPI_STM32_QSPI support
ARM: dts: ux500: Fix up the CPU thermal zone
arm64/ARM: configs: Change CONFIG_REMOTEPROC from m to y
ARM: dts: am4372: Set memory bandwidth limit for DISPC
ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
ARM: OMAP2+: Add missing LCDC midlemode for am335x
ARM: OMAP2+: Fix missing reset done flag for am3 and am43
ARM: dts: Fix gpio0 flags for am335x-icev2
ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
ARM: omap2plus_defconfig: Enable DRM_TI_TFP410
DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
ARM: dts: Fix wrong clocks for dra7 mcasp
clk: ti: dra7: Fix mcasp8 clock bits
Linus Torvalds [Sat, 5 Oct 2019 19:56:59 +0000 (12:56 -0700)]
Merge tag 'kbuild-fixes-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- remove unneeded ar-option and KBUILD_ARFLAGS
- remove long-deprecated SUBDIRS
- fix modpost to suppress false-positive warnings for UML builds
- fix namespace.pl to handle relative paths to ${objtree}, ${srctree}
- make setlocalversion work for /bin/sh
- make header archive reproducible
- fix some Makefiles and documents
* tag 'kbuild-fixes-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kheaders: make headers archive reproducible
kbuild: update compile-test header list for v5.4-rc2
kbuild: two minor updates for Documentation/kbuild/modules.rst
scripts/setlocalversion: clear local variable to make it work for sh
namespace: fix namespace.pl script to support relative paths
video/logo: do not generate unneeded logo C files
video/logo: remove unneeded *.o pattern from clean-files
integrity: remove pointless subdir-$(CONFIG_...)
integrity: remove unneeded, broken attempt to add -fshort-wchar
modpost: fix static EXPORT_SYMBOL warnings for UML build
kbuild: correct formatting of header in kbuild module docs
kbuild: remove SUBDIRS support
kbuild: remove ar-option and KBUILD_ARFLAGS
Linus Torvalds [Sat, 5 Oct 2019 19:53:27 +0000 (12:53 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Twelve patches mostly small but obvious fixes or cosmetic but small
updates"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix Nport ID display value
scsi: qla2xxx: Fix N2N link up fail
scsi: qla2xxx: Fix N2N link reset
scsi: qla2xxx: Optimize NPIV tear down process
scsi: qla2xxx: Fix stale mem access on driver unload
scsi: qla2xxx: Fix unbound sleep in fcport delete path.
scsi: qla2xxx: Silence fwdump template message
scsi: hisi_sas: Make three functions static
scsi: megaraid: disable device when probe failed after enabled device
scsi: storvsc: setup 1:1 mapping between hardware queue and CPU queue
scsi: qedf: Remove always false 'tmp_prio < 0' statement
scsi: ufs: skip shutdown if hba is not powered
scsi: bnx2fc: Handle scope bits when array returns BUSY or TSF
Linus Torvalds [Sat, 5 Oct 2019 19:03:27 +0000 (12:03 -0700)]
Merge branch 'readdir' (readdir speedup and sanity checking)
This makes getdents() and getdents64() do sanity checking on the
pathname that it gives to user space. And to mitigate the performance
impact of that, it first cleans up the way it does the user copying, so
that the code avoids doing the SMAP/PAN updates between each part of the
dirent structure write.
I really wanted to do this during the merge window, but didn't have
time. The conversion of filldir to unsafe_put_user() is something I've
had around for years now in a private branch, but the extra pathname
checking finally made me clean it up to the point where it is mergable.
It's worth noting that the filename validity checking really should be a
bit smarter: it would be much better to delay the error reporting until
the end of the readdir, so that non-corrupted filenames are still
returned. But that involves bigger changes, so let's see if anybody
actually hits the corrupt directory entry case before worrying about it
further.
* branch 'readdir':
Make filldir[64]() verify the directory entry filename is valid
Convert filldir[64]() from __put_user() to unsafe_put_user()
Linus Torvalds [Sat, 5 Oct 2019 18:32:52 +0000 (11:32 -0700)]
Make filldir[64]() verify the directory entry filename is valid
This has been discussed several times, and now filesystem people are
talking about doing it individually at the filesystem layer, so head
that off at the pass and just do it in getdents{64}().
This is partially based on a patch by Jann Horn, but checks for NUL
bytes as well, and somewhat simplified.
There's also commentary about how it might be better if invalid names
due to filesystem corruption don't cause an immediate failure, but only
an error at the end of the readdir(), so that people can still see the
filenames that are ok.
There's also been discussion about just how much POSIX strictly speaking
requires this since it's about filesystem corruption. It's really more
"protect user space from bad behavior" as pointed out by Jann. But
since Eric Biederman looked up the POSIX wording, here it is for context:
"From readdir:
The readdir() function shall return a pointer to a structure
representing the directory entry at the current position in the
directory stream specified by the argument dirp, and position the
directory stream at the next entry. It shall return a null pointer
upon reaching the end of the directory stream. The structure dirent
defined in the <dirent.h> header describes a directory entry.
From definitions:
3.129 Directory Entry (or Link)
An object that associates a filename with a file. Several directory
entries can associate names with the same file.
...
3.169 Filename
A name consisting of 1 to {NAME_MAX} bytes used to name a file. The
characters composing the name may be selected from the set of all
character values excluding the slash character and the null byte. The
filenames dot and dot-dot have special meaning. A filename is
sometimes referred to as a 'pathname component'."
Note that I didn't bother adding the checks to any legacy interfaces
that nobody uses.
Also note that if this ends up being noticeable as a performance
regression, we can fix that to do a much more optimized model that
checks for both NUL and '/' at the same time one word at a time.
We haven't really tended to optimize 'memchr()', and it only checks for
one pattern at a time anyway, and we really _should_ check for NUL too
(but see the comment about "soft errors" in the code about why it
currently only checks for '/')
See the CONFIG_DCACHE_WORD_ACCESS case of hash_name() for how the name
lookup code looks for pathname terminating characters in parallel.