Dave Airlie [Thu, 12 Sep 2019 13:56:12 +0000 (23:56 +1000)]
Merge tag 'drm-msm-next-2019-09-06' of https://gitlab.freedesktop.org/drm/msm into drm-next
+ move msm8998 (snapdragon 835) display support
+ dpu fixes/cleanup
+ better async commit support for cursor updates
(for dpu for now, I'll add mdp5 and possibly
mdp4 once the movers deliver boxes full of my
older hardware, so for v5.5)
Chris Wilson [Mon, 26 Aug 2019 13:07:50 +0000 (14:07 +0100)]
drm/i915: Use NOEVICT for first pass on attemping to pin a GGTT mmap
The intention is that we first try to pin the current vma into the
mappable aperture only if it is already in use or it fits in the free
space and will not cause contention. The first attempt was meant to be
using PIN_NOEVICT to reuse the current vma if possible, following up
with different eviction strategies.
Xiaolin Zhang [Fri, 23 Aug 2019 06:57:31 +0000 (14:57 +0800)]
drm/i915: to make vgpu ppgtt notificaiton as atomic operation
vgpu ppgtt notification was split into 2 steps, the first step is to
update PVINFO's pdp register and then write PVINFO's g2v_notify register
with action code to tirgger ppgtt notification to GVT side.
currently these steps were not atomic operations due to no any protection,
so it is easy to enter race condition state during the MTBF, stress and
IGT test to cause GPU hang.
the solution is to add a lock to make vgpu ppgtt notication as atomic
operation.
Chris Wilson [Fri, 23 Aug 2019 15:39:44 +0000 (16:39 +0100)]
drm/i915: Flush the existing fence before GGTT read/write
Our fence management is lazy, very lazy. If the user marks an object as
untiled, we do not immediately flush the fence but merely mark it as
dirty. On the next use we have to remember to check and remove the fence,
by which time we hope it is idle and we do not have to wait.
v2: Throw away the old fence on the next ggtt_pin.
Chris Wilson [Fri, 23 Aug 2019 13:26:46 +0000 (14:26 +0100)]
drm/i915: Hold irq-off for the entire fake lock period
Sadly lockdep records when the irqs are re-enabled and then marks up the
fake lock as being irq-unsafe. Our hand is forced and so we must mark up
the entire fake lock critical section as irq-off.
Hopefully this is the last tweak required!
v2: Not quite, we need to mark the timeline spinlock as irqsafe. That
was a genuine bug being hidden by the earlier lockdep splat.
Dave Airlie [Fri, 6 Sep 2019 06:40:28 +0000 (16:40 +1000)]
Merge tag 'drm-next-5.4-2019-08-30' of git://people.freedesktop.org/~agd5f/linux into drm-next
drm-next-5.4-2019-08-30:
amdgpu:
- Add DC support for Renoir
- Add some GPUVM hw bug workarounds
- add support for the smu11 i2c controller
- GPU reset vram lost bug fixes
- Navi1x powergating fixes
- Navi12 power fixes
- Renoir power fixes
- Misc bug fixes and cleanups
Weinan Li [Mon, 2 Sep 2019 05:57:59 +0000 (13:57 +0800)]
drm/i915/gvt: update RING_START reg of vGPU when the context is submitted to i915
The guest may use this register to identify the running state of one
context. Emulate it as the value in context image as if the context runs
on the GPU hardware.
Signed-off-by: Weinan Li <weinan.z.li@intel.com> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Xiaolin Zhang [Tue, 27 Aug 2019 08:39:23 +0000 (16:39 +0800)]
drm/i915/gvt: update vgpu workload head pointer correctly
when creating a vGPU workload, the guest context head pointer should
be updated correctly by comparing with the exsiting workload in the
guest worklod queue including the current running context.
in some situation, there is a running context A and then received 2 new
vGPU workload context B and A. in the new workload context A, it's head
pointer should be updated with the running context A's tail.
v2: walk through guest workload list in backward way.
Cc: stable@vger.kernel.org Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
There were bugs in the DSI transfer (read and write) function
as it was only tested with displays ever needing a single byte
to be written. Fixed it up and tested so we can now write
messages of up to 16 bytes and read up to 4 bytes from the
display.
Tested with a Sony ACX424AKP display: this display now self-
identifies and can control backlight in command mode.
Signed-off-by: Rob Clark <robdclark@chromium.org> Fixes: 3de433c5b38a ("drm/msm: Use the correct dma_sync calls in msm_gem") Tested-by: Fabio Estevam <festevam@gmail.com>
Denis Efremov [Thu, 29 Aug 2019 16:50:16 +0000 (19:50 +0300)]
drm/msm: remove unlikely() from WARN_ON() conditions
"unlikely(WARN_ON(x))" is excessive. WARN_ON() already uses unlikely()
internally.
Signed-off-by: Denis Efremov <efremov@linux.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: Joe Perches <joe@perches.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
Sean Paul [Wed, 7 Aug 2019 18:51:50 +0000 (14:51 -0400)]
drm/msm/dsi: Fix return value check for clk_get_parent
clk_get_parent returns an error pointer upon failure, not NULL. So the
checks as they exist won't catch a failure. This patch changes the
checks and the return values to properly handle an error pointer.
Fixes: c4d8cfe516dc ("drm/msm/dsi: add implementation for helper functions") Cc: Sibi Sankar <sibis@codeaurora.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Rob Clark <robdclark@chromium.org> Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark [Thu, 29 Aug 2019 16:45:16 +0000 (09:45 -0700)]
drm/msm: async commit support
Now that flush/wait/complete is decoupled from the "synchronous" part of
atomic commit_tail(), add support to defer flush to a timer that expires
shortly before vblank for async commits. In this way, multiple atomic
commits (for example, cursor updates) can be coalesced into a single
flush at the end of the frame.
v2: don't hold lock over ->wait_flush(), to avoid locking interaction
that was causing fps drop when combining page flips or non-async
atomic commits and lots of legacy cursor updates
Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <sean@poorly.run>
Rob Clark [Thu, 29 Aug 2019 16:45:15 +0000 (09:45 -0700)]
drm/msm: split power control from prepare/complete_commit
With atomic commit, ->prepare_commit() and ->complete_commit() may not
be evenly balanced (although ->complete_commit() will complete each
crtc that had been previously prepared). So these will no longer be
a good place to enable/disable clocks needed for hw access.
Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <sean@poorly.run>
Rob Clark [Thu, 29 Aug 2019 16:45:14 +0000 (09:45 -0700)]
drm/msm: add kms->flush_commit()
Add ->flush_commit(crtc_mask). Currently a no-op, but kms backends
should migrate writing flush registers to this hook, so we can decouple
pushing updates to hardware, and flushing the updates.
Once we add async commit support, the hw updates will be pushed down to
the hw synchronously, but flushing the updates will be deferred until as
close to vblank as possible, so that multiple updates can be combined in
a single frame.
Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <sean@poorly.run>
Rob Clark [Thu, 29 Aug 2019 16:45:12 +0000 (09:45 -0700)]
drm/msm: add kms->wait_flush()
First step in re-working the atomic related internal API to prepare for
async updates pending.. ->wait_flush() is intended to block until there
is no in-progress flush.
A crtc_mask is used, rather than an atomic state object, as this will
later be used for async flush after the atomic state is destroyed.
Rob Clark [Thu, 29 Aug 2019 16:45:11 +0000 (09:45 -0700)]
drm/msm/dpu: handle_frame_done() from vblank irq
Previously the callback was called from whoever called wait_for_vblank(),
but that isn't a great plan when wait_for_vblank() stops getting called,
and results in frame_done_timer expiring.
Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark [Thu, 29 Aug 2019 16:45:10 +0000 (09:45 -0700)]
drm/msm/dpu: add real wait_for_commit_done()
Just waiting for next vblank isn't ideal.. we should really be looking
at the hw FLUSH register value to know if there is still an in-progress
flush without stalling unnecessarily when there is no pending flush.
Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark [Thu, 29 Aug 2019 16:45:09 +0000 (09:45 -0700)]
drm/msm/dpu: unwind async commit handling
It attempted to avoid fps drops in the presence of cursor updates. But
it is racing, and can result in hw updates after flush before vblank,
which leads to underruns.
Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark [Tue, 20 Aug 2019 23:12:28 +0000 (16:12 -0700)]
drm/msm/dpu: fix "frame done" timeouts
Previously, dpu_crtc_frame_event_work() would try to aquire all the
modeset locks in order to check whether it can release bandwidth. (If
we only have cmd-mode display, bandwidth can be released at frame-done
time.)
The problem with this is that it is also responsible for signalling
frame_done_comp, which dpu_crtc_commit_kickoff() waits on if there is
already a frame pending. This is called in the msm_atomic_commit_tail()
path.. which means that for non-nonblock commits, at least some of the
modeset locks are already held.
Re-work this scheme to use a reference count to track our need to have
clocks enabled. It is incremented for each atomic commit, and
decremented in the corresponding frame-done. Additionally, any crtc
used in video mode hold an extra reference while they are enabled. The
net effect is that we can determine in frame-done whether it is safe to
drop bandwidth without needing to aquire any modeset locks.
Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sean Paul <sean@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
Jordan Crouse [Thu, 25 Jul 2019 16:53:55 +0000 (10:53 -0600)]
drm/msm: Use generic bulk clock function
Remove the homebrewed bulk clock get function and replace it with
devm_clk_bulk_get_all().
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
Jeffrey Hugo [Mon, 8 Jul 2019 15:12:24 +0000 (08:12 -0700)]
drm/msm/mdp5: Find correct node for creating gem address space
Creating the msm gem address space requires a reference to the dev where
the iommu is located. The driver currently assumes this is the same as
the platform device, which breaks when the iommu is outside of the
platform device (ie in the parent). Default to using the platform device,
but check to see if that has an iommu reference, and if not, use the parent
device instead. This should handle all the various iommu designs for
mdp5 supported systems.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
The following errors show up when booting the Nexus 5:
msm_dsi_phy fd922a00.dsi-phy: [drm:dsi_phy_driver_probe] *ERROR*
dsi_phy_regulator_init: failed to init regulator, ret=-517
msm_dsi_phy fd922a00.dsi-phy: [drm:dsi_phy_driver_probe] *ERROR*
dsi_phy_driver_probe: failed to init regulator
dsi_phy_regulator_init() already logs the error, so no need to log
the same error a second time in dsi_phy_driver_probe(). This patch
also changes dsi_phy_regulator_init() to not log the error if the
error code is -EPROBE_DEFER to reduce noise in dmesg.
Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[add some {}'s] Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark [Wed, 3 Jul 2019 14:00:35 +0000 (07:00 -0700)]
drm/msm/a6xx: add missing MODULE_FIRMWARE()
For platforms that require the "zap shader" to take the GPU out of
secure mode at boot, we also need the zap fw to end up in the initrd.
Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
Jeffrey Hugo [Mon, 1 Jul 2019 17:45:06 +0000 (10:45 -0700)]
drm/msm/mdp5: Add msm8998 support
Add support for MDP5 version v3.0 found on msm8998.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com>
[silence unitialized variable warnings] Signed-off-by: Rob Clark <robdclark@chromium.org>
Rob Clark [Sun, 30 Jun 2019 13:14:42 +0000 (06:14 -0700)]
drm/msm/dpu: remove dpu_mdss:hwversion
Unused and the extra rpm get/put interferes with handover from
bootloader (ie. happens before we have a chance to check if
things are already enabled).
Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
Jeffrey Hugo [Fri, 28 Jun 2019 16:28:31 +0000 (09:28 -0700)]
drm/msm: Transition console to msm framebuffer
If booting a device using EFI, efifb will likely come up and claim the
console. When the msm display stack finally comes up, we want the
console to move over to the msm fb, so add support to kick out any
firmware based framebuffers to accomplish the console transition.
Suggested-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Tested-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
Linus Walleij [Sat, 29 Jun 2019 12:59:31 +0000 (14:59 +0200)]
drm/msm/hdmi: Convert to use GPIO descriptors
This switches the MSM HDMI code to use GPIO descriptors.
Normally we would fetch the GPIOs from the device with the
flags GPIOD_IN or GPIOD_OUT_[LOW|HIGH] to set up the lines
immediately, but since the code seems eager to actively
drive the lines high/low when turning HDMI on and off, we
just fetch the GPIOs as-is and keep the code explicitly
driving them.
The old code would try legacy bindings (GPIOs without any
"-gpios" suffix) but this has been moved to the gpiolib
as a quirk by the previous patch.
Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
Linus Walleij [Sat, 29 Jun 2019 12:59:29 +0000 (14:59 +0200)]
drm/msm/dpu: Drop unused GPIO code
The DPU has some kind of idea that it wants to be able to
bring up power using GPIO lines. The struct dss_gpio is however
completely unused and should this be done, it should be done
using the GPIO descriptor framework rather than this API
which relies on the global GPIO numberspace. Delete this
code before anyone hurt themselves.
The inclusion of <linux/gpio.h> was abused to get some OF
and IRQ headers implicitly included into the DPU utilities,
make these includes explicit and push them down into the actual
implementation.
Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
Linus Walleij [Sat, 29 Jun 2019 12:59:28 +0000 (14:59 +0200)]
drm/msm/dsi: Drop unused GPIO includes
This DSI driver uses the new descriptor API so these old
GPIO API includes are surplus.
Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
Linus Walleij [Sat, 29 Jun 2019 12:59:27 +0000 (14:59 +0200)]
drm/msm/mdp4: Drop unused GPIO include
This file is not using any symbols from <linux/gpio.h> so just
drop this include.
Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
Sam Ravnborg [Sun, 4 Aug 2019 06:55:51 +0000 (08:55 +0200)]
drm/msm: drop use of drmP.h
Drop the deprecated drmP.h header file, and trim msm_drv.h
to the relevant include files.
This resulted in a suprisingly many edits as many files relied
on headers included via msm_drv.h.
But msm_drv.h is not supposed to carry include files it do not need, so
the individual files have to include what extra they needs.
v2:
- Rebased on top of https://gitlab.freedesktop.org/drm/msm.git msm-next
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Bruce Wang <bzwang@chromium.org> Cc: Shayenne Moura <shayenneluzmoura@gmail.com> Cc: Mamta Shukla <mamtashukla555@gmail.com> Cc: Jonathan Marek <jonathan@marek.ca> Cc: Carsten Behling <carsten.behling@googlemail.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Cc: Sibi Sankar <sibis@codeaurora.org> Cc: Todor Tomov <todor.tomov@linaro.org> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190804065551.GA5211@ravnborg.org
Petr Cvek [Fri, 30 Aug 2019 14:31:58 +0000 (16:31 +0200)]
drm/amdgpu: Fix undefined dm_ip_block for navi12
There is missing "if defined" CONFIG_DRM_AMD_DC block for non DC
configurations. This will cause link error. The patch is fixing that.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=110979 Signed-off-by: Petr Cvek <petrcvekcz@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aaron Liu [Fri, 14 Dec 2018 03:21:41 +0000 (11:21 +0800)]
drm/amdgpu: fix no interrupt issue for renoir emu (v2)
In renoir's vega10_ih model, there's a security change in mmIH_CHICKEN
register, that limits IH to use physical address (FBPA, GPA) directly.
Those chicken bits need to be programmed first.
Signed-off-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aaron Liu [Fri, 30 Aug 2019 01:53:27 +0000 (09:53 +0800)]
drm/amd/powerplay: SMU_MSG_OverridePcieParameters is unsupport for APU
For apu, SMU_MSG_OverridePcieParameters is unsupport.
So return directly in smu_override_pcie_parameters function.
Signed-off-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Handle job is NULL use case in amdgpu_device_gpu_recover
This should be checked at all places job is accessed.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With the introduction of the as_lock to serialize address space registers,
the hwaccess_lock is only used within the job code and is not protecting
anything. panfrost_job_hw_submit() only accesses registers for 1 job slot
and it's already serialized by drm_sched.
Fixes: 7282f7645d06 ("drm/panfrost: Implement per FD address spaces") Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190826223317.28509-9-robh@kernel.org
Rob Herring [Mon, 26 Aug 2019 22:33:16 +0000 (17:33 -0500)]
drm/panfrost: Flush and disable address space when freeing page tables
Currently, page tables are freed without disabling the address space first.
This probably is fine as we'll switch to new page tables when the address
space is allocated again and runtime PM suspend will reset the GPU
clearing the registers. However, it's better to clean up after ourselves.
There is also a problem that we could be accessing the h/w in
tlb_inv_context() when suspended.
Rework the disable code to make sure we flush caches/TLBs and disable the
address space before freeing the page tables if we are not suspended. As
the tlb_inv_context() hook is only called when freeing the page tables and
we do a flush before disabling the AS, lets remove the flush from
tlb_inv_context and avoid any runtime PM issues.
Fixes: 7282f7645d06 ("drm/panfrost: Implement per FD address spaces") Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190826223317.28509-8-robh@kernel.org
Rob Herring [Mon, 26 Aug 2019 22:33:13 +0000 (17:33 -0500)]
drm/panfrost: Rework page table flushing and runtime PM interaction
There is no point in resuming the h/w just to do flush operations and
doing so takes several locks which cause lockdep issues with the shrinker.
Rework the flush operations to only happen when the h/w is already awake.
This avoids taking any locks associated with resuming which trigger
lockdep warnings.
Fixes: 013b65101315 ("drm/panfrost: Add madvise and shrinker support") Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190826223317.28509-5-robh@kernel.org
Rob Herring [Mon, 26 Aug 2019 22:33:11 +0000 (17:33 -0500)]
drm/panfrost: Hold runtime PM reference until jobs complete
Doing a pm_runtime_put as soon as a job is submitted is wrong as it should
not happen until the job completes. It works currently because we are
relying on the autosuspend timeout to keep the h/w enabled.
Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver") Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Steven Price <steven.price@arm.com> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190826223317.28509-3-robh@kernel.org
Rob Herring [Mon, 26 Aug 2019 22:33:10 +0000 (17:33 -0500)]
drm/panfrost: Rework runtime PM initialization
There's a few issues with the runtime PM initialization.
The documentation states pm_runtime_set_active() should be called before
pm_runtime_enable(). The pm_runtime_put_autosuspend() could suspend the GPU
before panfrost_perfcnt_init() is called which touches the h/w. The
autosuspend delay keeps things from breaking. There's no need explicitly
power off the GPU only to wake back up with pm_runtime_get_sync(). Just
delaying pm_runtime_enable to the end of probe is sufficient.
Lets move all the runtime PM calls into the probe() function so they are
all in one place and are done after all initialization.
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Steven Price <steven.price@arm.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190826223317.28509-2-robh@kernel.org
Prike Liang [Thu, 15 Aug 2019 08:53:08 +0000 (16:53 +0800)]
drm/amd/powerplay: add the interface for getting ultimate frequency v3
add the get_dpm_ultimate_freq for supporting different swSMU.
-v2:
Handle the unsupported clock type and read smc message failed case and return error code.
Move the smu12 uclk frequency retrieved logic to renoir ppt.
-v3:
Use goto clause to handle invalidate clk index.
Add the limited tag for smu_get_dpm_uclk to avoid other likewise interface introduced.
Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prike Liang [Thu, 15 Aug 2019 01:39:06 +0000 (09:39 +0800)]
drm/amd/powerplay: regards the APU always enable the dpm feature mask
There is no driver message to enable/disable feature mask for APU.
For the sake of APU reusing swSMU interface and assume APU supports all
the feature.
Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tianci.Yin [Wed, 28 Aug 2019 02:03:40 +0000 (10:03 +0800)]
drm/amdgpu/psp: keep TMR in visible vram region for SRIOV
Fix compute ring test failure in sriov scenario.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tianci.Yin [Wed, 28 Aug 2019 10:51:19 +0000 (18:51 +0800)]
drm/amdgpu: keep the stolen memory in visible vram region
stolen memory should be fixed in visible region.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 28 Aug 2019 13:47:34 +0000 (08:47 -0500)]
drm/amdgpu/virtual_dce: drop error message in hw_init
No need to add new asic cases. This is a sw display
implementation, so just drop the error message so when
we add new asics, all we have to do is add the virtual
dce IP module.
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jean Delvare [Wed, 28 Aug 2019 15:05:57 +0000 (17:05 +0200)]
drm/amdgpu/si: fix ASIC tests
Comparing adev->family with CHIP constants is not correct.
adev->family can only be compared with AMDGPU_FAMILY constants and
adev->asic_type is the struct member to compare with CHIP constants.
They are separate identification spaces.
Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 62a37553414a ("drm/amdgpu: add si implementation v10") Cc: Ken Wang <Qingqing.Wang@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Tue, 27 Aug 2019 08:32:55 +0000 (16:32 +0800)]
drm/amdgpu: introduce vram lost for reset (v2)
for SOC15/vega10 the BACO reset & mode1 would introduce vram lost
in high end address range, current kmd's vram lost checking cannot
catch it since it only check very ahead visible frame buffer
v2:
cover NV as well
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>