Alex Deucher [Thu, 12 Dec 2019 22:43:36 +0000 (17:43 -0500)]
drm/amdgpu/pm_runtime: update usage count in fence handling
Increment the usage count in emit fence, and decrement in
process fence to make sure the GPU is always considered in
use while there are fences outstanding. We always wait for
the engines to drain in runtime suspend, but in practice
that only covers short lived jobs for gfx. This should
cover us for longer lived fences.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Zhan Liu [Mon, 16 Dec 2019 19:56:50 +0000 (14:56 -0500)]
drm/amd/powerplay: Add SMU WMTABLE Validity Check for Renoir
[Why]
SMU watermark table (WMTABLE) validity check is missing on Renoir.
This validity check is very useful for checking whether
WMTABLE is updated successfully.
[How]
Add SMU watermark validity check.
Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nikola Cornij [Tue, 3 Dec 2019 22:01:12 +0000 (17:01 -0500)]
drm/amd/display: Add debug option to override DSC target bpp increment
[why]
It's required for debug purposes.
[how]
Add a dsc_bpp_increment_div debug option that overrides DPCD
BITS_PER_PIXEL_INCREMENT value. The value dsc_bpp_increment_div should
be set to is the one after parsing, i.e. it could be 1, 2, 4, 8 or 16
(meaning 1pix, 1/2pix, ..., 1/16pix).
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Samson Tam [Wed, 4 Dec 2019 23:35:15 +0000 (18:35 -0500)]
drm/amd/display: fix missing cursor on some rotated SLS displays
[Why]
Cursor disappears for some SLS displays that are rotated 180
and 270 degrees. This occurs when there is no pipe split being
done ( ex. 3 or more displays ). The cursor calculations assume
pipe splitting is done so when it calculates the new cursor
position in hwss.set_cursor_position(), it is out-of-bounds so
it disables the cursor in hubp.set_cursor_position().
[How]
In non pipe split cases, calculate cursor using viewport size
( width or height ) instead of viewport size * 2 ( the two
because pipe splitting divides the rectangle into two ).
Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sung Lee [Wed, 4 Dec 2019 23:36:07 +0000 (18:36 -0500)]
drm/amd/display: Lower DPP DTO only when safe
[Why]
A corner case currently exists where DPP DTO is lowered before
pipes are updated to a higher viewport. This causes underflow
as the DPPCLK is too low for the current viewport.
[How]
Only lower DPP DTO when it is safe to lower, or if
the newer clocks are higher than the current ones.
Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jun Lei [Mon, 25 Nov 2019 15:58:44 +0000 (10:58 -0500)]
drm/amd/display: support virtual DCN
[why]
DAL3 should support SRIOV
[how]
Add support for the virtual dal flag. This flag should skip
most/all of DC construction since the HW isn't accessible, but
still construct WindowsDM (almost) normally but with only SW display
targets
Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sung Lee [Mon, 2 Dec 2019 21:45:16 +0000 (16:45 -0500)]
drm/amd/display: Fix update_bw_bounding_box Calcs
[Why]
Previously update_bw_bounding_box for RN was commented out
due to incorrect values causing BSOD on Hybrid Graphics.
However, commenting out this function also may cause issues
such as underflow in certain cases such as 2x4K displays.
[How]
Fix dram_speed_mts calculations.
Update from proper index of clock_limits[]
Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Samson Tam [Thu, 28 Nov 2019 20:55:01 +0000 (15:55 -0500)]
drm/amd/display: fix 270 degree rotation for mixed-SLS mode
[Why]
When we rotate 270 in mixed SLS mode, the recouts occupy the
right side of the display. So all the recout_skip_v values
are relative to the left side of the display. This causes
adjust_vp_and_init_for_seamless_clip() to incorrectly increase
the data->viewport.height for that recout. The rotation looks
like the bottom half is duplicated twice.
[How]
recout.x values are being adjusted based on
stream->timing.h_border_left. Instead of using h_border_left,
use dst.x to represent the border. Shift dst.x by the amount of
stream->timing.h_border_left and set
stream->timing.h_border_left to 0. Do all the calculations
and then revert stream->timing.h_border_left and
stream->dst.x back to their original values.
When calculating pipe_ctx->plane_res.scl_data.h_active,
make sure to use the original stream->timing.h_border_left
value.
Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Noah Abradjian [Fri, 29 Nov 2019 18:48:36 +0000 (13:48 -0500)]
drm/amd/display: Remove reliance on pipe indexing
[Why]
In certain instances, there was a reliance on pipe indexing being accurate. However, this
assumption fails with harvesting of pipes 1 or 2, which can occur in production B6 parts.
HW hang would occur as a result.
[How]
Use hubp index for mpcc, and do mpc_init for all theoretical pipes (including disabled ones).
Signed-off-by: Noah Abradjian <noah.abradjian@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Paul Hsieh [Thu, 28 Nov 2019 02:44:39 +0000 (10:44 +0800)]
drm/amd/display: check link status before disable stream
[Why]
1. Set second screen only then unplug external monitor
2. Enter to S4 then plug in external monitor
3. Resume from S4, eDP will not turn off when OS set
second screen only
Sometimes OS will not set eDP power up cause eDP dpms_off
keep true then driver skipp disable stream
[How]
When drvier try to disable stream, add link status condition
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The DMUB is put into reset on suspend and is not running on resume,
disabling PSR/ABM features.
[How]
Move the allocation of the framebuffer to sw_init.
Do DMUB hardware init and framebuffer filling only from hw_init.
On resume the contents of the framebuffer will be invalid so those
should be cleared.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nikola Cornij [Tue, 26 Nov 2019 20:18:31 +0000 (15:18 -0500)]
drm/amd/display: Map ODM memory correctly when doing ODM combine
[why]
Up to 4 ODM memory pieces are required per ODM combine and cannot
overlap, i.e. each ODM "session" has to use its own memory pieces.
The ODM-memory mapping is currently broken for generic case.
The maximum number of memory pieces is ASIC-dependent, but it's always
big enough to satisfy maximum number of ODM combines. Memory pieces
are mapped as a bit-map, i.e. one memory piece corresponds to one bit.
The OPTC doing ODM needs to select memory pieces by setting the
corresponding bits, making sure there's no overlap with other OPTC
instances that might be doing ODM.
The current mapping works only for OPTC instance indexes smaller than
3. For instance indexes 3 and up it practically maps no ODM memory,
causing black, gray or white screen in display configs that include
ODM on OPTC instance 3 or up.
[how]
Statically map two unique ODM memory pieces for each OPTC instance
and piece them together when programming ODM combine mode.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Thu, 21 Nov 2019 02:23:47 +0000 (21:23 -0500)]
drm/amd/display: Add warmup escape call support
Add warmup escape support, for diags, in a way that is possible to
choose a new or an existing sequence. For achieving this goal, this
commit adds separated MCIF buffer as VCN request.
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Josip Pavic [Tue, 26 Nov 2019 17:26:14 +0000 (12:26 -0500)]
drm/amd/display: fix regamma build optimization
[Why]
When the global variable pow_buffer_ptr is set to -1, by definition
optimizations should not be used to build the regamma. Since
translate_from_linear_space unconditionally increments this global, it
inadvertently enables the optimization.
[How]
Increment pow_buffer_ptr only if it is not -1.
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Sat, 23 Nov 2019 22:15:51 +0000 (17:15 -0500)]
drm/amd/display: Remove integer scaling code from DC and fix cursor
[Why]
Scaling better handled by upper layers before pipe splitting.
[How]
Remove DC code for integer scaling and force cursor update if
viewport or scaling changes occur to prevent underflow from
invalid cursor position.
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Martin Leung [Fri, 22 Nov 2019 00:13:54 +0000 (19:13 -0500)]
drm/amd/display: Enable Seamless Boot Transition for Multiple Streams
[why]
dc previously had bugs that interfered with the ability to inherit a
timing from a device with multiple streams (without flash/blanking).
After this fix there is still a dependency on UEFI support.
[how]
fixed 3 bugs: loaded MPC state, changed bw_optimize flag to a counter
instead of a boolean, and reading dpp/disp clk from HW to ensure we
don't raise the clock's when we're not supposed to.
Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Fri, 22 Nov 2019 15:58:10 +0000 (10:58 -0500)]
drm/amd/display: Default max bpc to 16 for eDP
[Why]
Some 10bit eDP panels don't lightup after we cap bpc to 8.
[How]
Set default max_bpc to 16 for edp connector type.
Signed-off-by: Roman Li <roman.li@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Noah Abradjian [Fri, 22 Nov 2019 21:07:24 +0000 (16:07 -0500)]
drm/amd/display: Collapse resource arrays when pipe is disabled
[Why]
Currently, pipe resources are assigned to an index that matches the pipe position.
However, if pipe 1 or 2 is disabled, there will be a gap in the arrays which causes a crash when iterating based on pipe_count.
[How]
Fix resource construct to assign resources to minimum available array index.
Signed-off-by: Noah Abradjian <noah.abradjian@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Yang [Mon, 18 Nov 2019 20:41:19 +0000 (15:41 -0500)]
drm/amd/display: update chroma viewport wa
[Why]
Need previously implemented chroma vp wa to work for rotation cases.
[How]
Implement rotation specific wa.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Noah Abradjian [Fri, 22 Nov 2019 16:47:52 +0000 (11:47 -0500)]
drm/amd/display: Use pipe_count for num of opps
[Why]
There is one opp per pipe. For certain RN parts, the fourth pipe is disabled, so there is no opp for it.
res_cap->num_opp is hardcoded to 4, so if we use that to iterate over opps we will crash.
[How]
Use the pipe_count value instead, which is not hardcoded and so will have the correct number.
Signed-off-by: Noah Abradjian <noah.abradjian@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Amanda Liu [Thu, 21 Nov 2019 21:06:57 +0000 (16:06 -0500)]
drm/amd/display: Reinstate LFC optimization
[why]
We want to streamline the calculations made when entering LFC.
Previously, the optimizations led to screen tearing and were backed out
to unblock development.
[how]
Integrate other calculations parameters, as well as screen tearing,
fixes with the original LFC calculation optimizations.
Signed-off-by: Amanda Liu <amanda.liu@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Noah Abradjian [Mon, 18 Nov 2019 18:59:57 +0000 (13:59 -0500)]
drm/amd/display: Add wait for flip not pending on pipe unlock
[Why]
Lack of proper timing caused intermittent underflow on unplug external DP.
A previous fix was invalid and caused S0i3 regression, so had to be reverted.
[How]
When unlocking pipe, wait for no pipes to have flip pending before unlocking.
Signed-off-by: Noah Abradjian <noah.abradjian@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Sat, 9 Nov 2019 02:52:27 +0000 (21:52 -0500)]
drm/amd/display: HDMI 2.x audio bandwidth check
Add HDMI 2.x audio bandwidth check
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Liu [Thu, 12 Dec 2019 15:28:02 +0000 (10:28 -0500)]
drm/amdgpu/vcn1.0: use its own idle handler and begin use funcs
Because VCN1.0 power management and DPG mode are managed together with
JPEG1.0 under both HW and FW, so separated them from general VCN code.
Also the multiple instances case got removed, since VCN1.0 HW just have
a single instance.
v2: override work func with vcn1.0's own
Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
changzhu [Thu, 12 Dec 2019 05:46:06 +0000 (13:46 +0800)]
drm/amdgpu: enable gfxoff for raven1 refresh
When smu version is larger than 0x41e2b, it will load
raven_kicker_rlc.bin.To enable gfxoff for raven_kicker_rlc.bin,it
needs to avoid adev->pm.pp_feature &= ~PP_GFXOFF_MASK when it loads
raven_kicker_rlc.bin.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Wed, 27 Nov 2019 19:47:32 +0000 (14:47 -0500)]
drm/amd/display: add missing dcn link encoder regs
[Why]
The earlier change: "check phy dpalt lane count config"
uses link encoder registers not defined properly.
That caused regression with mst-enabled display not
lighting up.
[How]
Add missing reg definitions.
Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Mon, 2 Dec 2019 21:26:42 +0000 (16:26 -0500)]
drm/amdgpu: add dpcs20 registers
add reg headers to dpcs includes
Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Mon, 2 Dec 2019 15:01:38 +0000 (10:01 -0500)]
drm/amdgpu: move dpcs headers to dpcs includes
- create dpcs directory for dpcs asic_reg headers
- move dpcs21 reg headers from dcn to dpcs directory
Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Colin Ian King [Thu, 12 Dec 2019 18:16:57 +0000 (18:16 +0000)]
drm/amd/powerplay: fix various dereferences of a pointer before it is null checked
There are several occurrances of the pointer hwmgr being dereferenced
before it is null checked. Fix these by performing the dereference
of hwmgr after it has been null checked.
Addresses-Coverity: ("Dereference before null check") Fixes: c9ffa427db34e6 ("drm/amd/powerplay: enable pp one vf mode for vega10") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Wed, 30 Jan 2019 20:29:34 +0000 (15:29 -0500)]
drm/amdkfd: queue kfd interrupt work to different CPU
Because queue_work schedule the work on the same CPU the interrupt
handler is running, if there are many interrupts pending, it takes
longer time for work queue to start, or even worse system will hang.
v2: queue work to same NUMA node for better cache locality
v3: handle cpumask_next wraparound case
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Eric Huang <JinhuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Timothy Pearson [Sat, 7 Dec 2019 22:48:09 +0000 (16:48 -0600)]
amdgpu: Wrap FPU dependent functions in dc20
dc20 containes several FPU-dependent functions without proper FPU
kernel mode enable/disable wrappers. Add the required wrappers
for both x86 and POWER.
This enables Navi DC20 support for POWER systems.
v2: fix compilation
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Timothy Pearson [Sat, 7 Dec 2019 22:47:46 +0000 (16:47 -0600)]
amdgpu: Enable initial DCN support on POWER
DCN requires floating point support to operate. Add the appropriate
x86/ppc64 guards and FPU / AltiVec / VSX context switches to DCN.
Note that the current DC20 code doesn't contain all required FPU
wrappers on x86 or POWER, so this patch is insufficient to fully
enable DC20 on POWER.
v2: s/X86_64/X86/g to retain previous behavior.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fabrizio Castro [Tue, 17 Dec 2019 13:45:59 +0000 (13:45 +0000)]
drm: rcar-du: lvds: Allow for even and odd pixels swap
DT properties dual-lvds-even-pixels and dual-lvds-odd-pixels
can be used to work out if the driver needs to swap even
and odd pixels around.
This patch makes use of the return value from function
drm_of_lvds_get_dual_link_pixel_order to determine if we
need to swap odd and even pixels around for things to work
properly.
The dual_link boolean field from struct rcar_lvds is not
sufficient to describe the type of LVDS link anymore, since
we now have information related to pixel order, therefore
rename it to link_type and repurpose its usage to fit the
new requirements.
Fabrizio Castro [Tue, 17 Dec 2019 13:45:58 +0000 (13:45 +0000)]
drm: rcar-du: lvds: Get dual link configuration from DT
For dual-LVDS configurations, it is now possible to mark the
DT port nodes for the sink with boolean properties (like
dual-lvds-even-pixels and dual-lvds-odd-pixels) to let drivers
know the encoders need to be configured in dual-LVDS mode.
Rework the implementation of rcar_lvds_parse_dt_companion
to make use of the DT markers while keeping backward
compatibility.
Fabrizio Castro [Tue, 17 Dec 2019 13:45:57 +0000 (13:45 +0000)]
drm: rcar-du: lvds: Improve identification of panels
Dual-LVDS panels are mistakenly identified as bridges, this
commit replaces the current logic with a call to
drm_of_find_panel_or_bridge to sort that out.
An LVDS dual-link connection is made of two links, with even
pixels transitting on one link, and odd pixels on the other
link. The device tree can be used to fully describe dual-link
LVDS connections between encoders and bridges/panels.
The sink of an LVDS dual-link connection is made of two ports,
the corresponding OF graph port nodes can be marked
with either dual-lvds-even-pixels or dual-lvds-odd-pixels,
and that fully describes an LVDS dual-link connection,
including pixel order.
drm_of_lvds_get_dual_link_pixel_order is a new helper
added by this patch, given the source port nodes it
returns DRM_LVDS_DUAL_LINK_EVEN_ODD_PIXELS if the source
port nodes belong to an LVDS dual-link connection, with even
pixels expected to be generated from the first port, and odd
pixels expected to be generated from the second port.
If the new helper returns DRM_LVDS_DUAL_LINK_ODD_EVEN_PIXELS,
odd pixels are expected to be generated from the first port,
and even pixels from the other port.
Laurent Pinchart [Tue, 15 Oct 2019 23:06:52 +0000 (02:06 +0300)]
drm: rcar-du: lvds: Get mode from state
The R-Car LVDS encoder driver implements the bridge .mode_set()
operation for the sole purpose of storing the mode in the LVDS private
data, to be used later when enabling the encoder.
Switch to the bridge .atomic_enable() and .atomic_disable() operations
in order to access the global atomic state, and get the mode from the
state instead. Remove both the unneeded .mode_set() operation and the
display_mode and mode fields storing state data from the rcar_lvds
private structure.
As a side effect we get the CRTC from the state, replace the CRTC
pointer retrieved through the bridge's encoder that shouldn't be used by
atomic drivers.
While at it, clarify a few error messages in rcar_lvds_get_lvds_mode()
and turn them into warnings as they are not fatal.
drm: rcar-du: Recognize "renesas,vsps" in addition to "vsps"
The Renesas-specific "vsps" property lacks a vendor prefix.
Add a "renesas," prefix to comply with DT best practises.
Retain backward compatibility with old DTBs by falling back to "vsps"
when needed.
Fixes: 6d62ef3ac30be756 ("drm: rcar-du: Expose the VSP1 compositor through KMS planes") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Jacopo Mondi [Thu, 17 Oct 2019 13:44:09 +0000 (15:44 +0200)]
drm: rcar-du: crtc: Control CMM operations
Implement CMM handling in the crtc begin and enable atomic callbacks,
and enable CMM unit through the Display Extensional Functions
register at group setup time.
Jacopo Mondi [Wed, 16 Oct 2019 08:55:44 +0000 (10:55 +0200)]
drm: rcar-du: kms: Initialize CMM instances
Implement device tree parsing to collect the available CMM instances
described by the 'renesas,cmms' property. Associate CMMs with CRTCs and
store a mask of active CMMs in the DU group for later enablement.
Enforce the probe and suspend/resume ordering of DU and CMM by creating
a stateless device link between the two.
Jacopo Mondi [Thu, 17 Oct 2019 13:43:32 +0000 (15:43 +0200)]
drm: rcar-du: Add support for CMM
Add a driver for the R-Car Display Unit Color Correction Module.
In most of Gen3 SoCs, each DU output channel is provided with a CMM unit
to perform image enhancement and color correction.
Add support for CMM through a driver that supports configuration of
the 1-dimensional LUT table. More advanced CMM features will be
implemented on top of this initial one.
Document the newly added 'renesas,cmms' property which accepts a list of
phandle and channel index pairs that point to the CMM units available
for each Display Unit output video channel.
Daniel Vetter [Tue, 17 Dec 2019 17:47:46 +0000 (18:47 +0100)]
Merge tag 'drm-next-5.6-2019-12-11' of git://people.freedesktop.org/~agd5f/linux into drm-next
drm-next-5.6-2019-12-11:
amdgpu:
- Add MST atomic routines
- Add support for DMCUB (new helper microengine for displays)
- Add OEM i2c support in DC
- Use vstartup for vblank events on DCN
- Simplify Kconfig for DC
- Renoir fixes for DC
- Clean up function pointers in DC
- Initial support for HDCP 2.x
- Misc code cleanups
- GFX10 fixes
- Rework JPEG engine handling for VCN
- Add clock and power gating support for JPEG
- BACO support for Arcturus
- Cleanup PSP ring handling
- Add framework for using BACO with runtime pm to save power
- Move core pci state handling out of the driver for pm ops
- Allow guest power control in 1 VF case with SR-IOV
- SR-IOV fixes
- RAS fixes
- Support for power metrics on renoir
- Golden settings updates for gfx10
- Enable gfxoff on supported navi10 skus
- Update MAINTAINERS
amdkfd:
- Clean up generational gfx code
- Fixes for gfx10
- DIQ fixes
- Share more code with amdgpu
Stephen Rothwell [Mon, 16 Dec 2019 01:23:31 +0000 (12:23 +1100)]
linux-next: build failure after merge of the drm-misc tree
Hi all,
After merging the drm-misc tree, today's linux-next build (x86_64
allmodconfig) failed like this:
drivers/gpu/drm/bridge/analogix/analogix-anx6345.c: In function 'anx6345_i2c_probe':
drivers/gpu/drm/bridge/analogix/analogix-anx6345.c:738:30: error: implicit declaration of function 'i2c_new_dummy' [-Werror=implicit-function-declaration]
738 | anx6345->i2c_clients[i] = i2c_new_dummy(client->adapter,
| ^~~~~~~~~~~~~
drivers/gpu/drm/bridge/analogix/analogix-anx6345.c:738:28: warning: assignment to 'struct i2c_client *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
738 | anx6345->i2c_clients[i] = i2c_new_dummy(client->adapter,
| ^
Daniel Vetter [Tue, 17 Dec 2019 12:57:54 +0000 (13:57 +0100)]
Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.6:
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
Remove obsolete bundled tfp410 driver with its "ti,tilcdc,tfp410"
devicetree binding. No platform has ever used this driver in the
mainline kernel and if anybody connects tfp410 to tilcdc he or she
should use the generic drm tfp410 bridge driver.
Linus Torvalds [Sun, 15 Dec 2019 22:58:13 +0000 (14:58 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Doug Ledford:
"A small collection of -rc fixes. Mostly. One API addition, but that's
because we wanted to use it in a fix. There's also a bug fix that is
going to render the 5.5 kernel's soft-RoCE driver incompatible with
all soft-RoCE versions prior, but it's required to actually implement
the protocol according to the RoCE spec and required in order for the
soft-RoCE driver to be able to successfully work with actual RoCE
hardware.
Summary:
- Update Steve Wise info
- Fix for soft-RoCE crc calculations (will break back compatibility,
but only with the soft-RoCE driver, which has had this bug since it
was introduced and it is an on-the-wire bug, but will make
soft-RoCE fully compatible with real RoCE hardware)
- cma init fixup
- counters oops fix
- fix for mlx4 init/teardown sequence
- fix for mkx5 steering rules
- introduce a cleanup API, which isn't a fix, but we want to use it
in the next fix
- fix for mlx5 memory management that uses API in previous patch"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/mlx5: Fix device memory flows
IB/core: Introduce rdma_user_mmap_entry_insert_range() API
IB/mlx5: Fix steering rule of drop and count
IB/mlx4: Follow mirror sequence of device add during device removal
RDMA/counter: Prevent auto-binding a QP which are not tracked with res
rxe: correctly calculate iCRC for unaligned payloads
Update mailmap info for Steve Wise
RDMA/cma: add missed unregister_pernet_subsys in init failure
Linus Torvalds [Sun, 15 Dec 2019 20:27:31 +0000 (12:27 -0800)]
Merge tag 'riscv/for-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Two minor build fixes:
- Fix builds of the ELF loader when built with 'make -j1' (nommu
only)
- Fix CONFIG_SOC_SIFIVE builds when CONFIG_TTY is disabled (found
during randconfig testing)"
* tag 'riscv/for-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: only select serial sifive if TTY is enabled
riscv: Fix build dependency for loader
Linus Torvalds [Sun, 15 Dec 2019 20:24:44 +0000 (12:24 -0800)]
Merge tag 'for-linus-5.5b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two fixes: one for a resource accounting bug in some configurations
and a fix for another patch which went into rc1"
* tag 'for-linus-5.5b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/balloon: fix ballooned page accounting without hotplug enabled
xen-blkback: prevent premature module unload
Linus Torvalds [Sun, 15 Dec 2019 19:36:12 +0000 (11:36 -0800)]
Merge branch 'remove-ksys-mount-dup' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux
Pull ksys_mount() and ksys_dup() removal from Dominik Brodowski:
"This small series replaces all in-kernel calls to the
userspace-focused ksys_mount() and ksys_dup() with calls to
kernel-centric functions:
For each replacement of ksys_mount() with do_mount(), one needs to
verify that the first and third parameter (char *dev_name, char *type)
are strings allocated in kernelspace and that the fifth parameter
(void *data) is either NULL or refers to a full page (only occurence
in init/do_mounts.c::do_mount_root()). The second and fourth
parameters (char *dir_name, unsigned long flags) are passed by
ksys_mount() to do_mount() unchanged, and therefore do not require
particular care.
Moreover, instead of pretending to be userspace, the opening of
/dev/console as stdin/stdout/stderr can be implemented using in-kernel
functions as well. Thereby, ksys_dup() can be removed for good"
[ This doesn't get rid of the special "kernel init runs with KERNEL_DS"
case, but it at least removes _some_ of the users of "treat kernel
pointers as user pointers for our magical init sequence".
One day we'll hopefully be rid of it all, and can initialize our
init_thread addr_limit to USER_DS. - Linus ]
* 'remove-ksys-mount-dup' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
fs: remove ksys_dup()
init: unify opening /dev/console as stdin/stdout/stderr
init: use do_mount() instead of ksys_mount()
initrd: use do_mount() instead of ksys_mount()
devtmpfs: use do_mount() instead of ksys_mount()
Linus Torvalds [Sat, 14 Dec 2019 20:51:57 +0000 (12:51 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"24 fixes, all in drivers. The lion's share (16) are qla2xxx and the
rest are iscsi (3), ufs (2), smarpqi, lpfc and libsas"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
scsi: iscsi: Avoid potential deadlock in iscsi_if_rx func
scsi: iscsi: Fix a potential deadlock in the timeout handler
scsi: smartpqi: Update attribute name to `driver_version`
scsi: libsas: stop discovering if oob mode is disconnected
scsi: ufs: Disable autohibern8 feature in Cadence UFS
scsi: iscsi: qla4xxx: fix double free in probe
scsi: ufs: Give an unique ID to each ufs-bsg
scsi: qla2xxx: Add debug dump of LOGO payload and ELS IOCB
scsi: qla2xxx: Ignore PORT UPDATE after N2N PLOGI
scsi: qla2xxx: Don't defer relogin unconditonally
scsi: qla2xxx: Send Notify ACK after N2N PLOGI
scsi: qla2xxx: Configure local loop for N2N target
scsi: qla2xxx: Fix PLOGI payload and ELS IOCB dump length
scsi: qla2xxx: Don't call qlt_async_event twice
scsi: qla2xxx: Allow PLOGI in target mode
scsi: qla2xxx: Change discovery state before PLOGI
scsi: qla2xxx: Drop superfluous INIT_WORK of del_work
scsi: qla2xxx: Initialize free_work before flushing it
scsi: qla2xxx: Use explicit LOGO in target mode
scsi: qla2xxx: Ignore NULL pointer in tcm_qla2xxx_free_mcmd
...
Linus Torvalds [Sat, 14 Dec 2019 20:49:20 +0000 (12:49 -0800)]
Merge tag 'char-misc-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are six small fixes for some reported char/misc driver issues:
- fix build warnings with new 'awk' with the raid6 code
- four interconnect driver bugfixes
- binder fix for reported problem
All of these except the binder fix have been in linux-next with no
reported issues. The binder fix is "new" but Todd says it is good as
he has tested it :)"
* tag 'char-misc-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
binder: fix incorrect calculation for num_valid
interconnect: qcom: msm8974: Walk the list safely on node removal
interconnect: qcom: qcs404: Walk the list safely on node removal
interconnect: qcom: sdm845: Walk the list safely on node removal
interconnect: qcom: Fix Kconfig indentation
lib: raid6: fix awk build warnings
Linus Torvalds [Sat, 14 Dec 2019 20:45:36 +0000 (12:45 -0800)]
Merge tag 'driver-core-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two small driver core fixes to resolve some reported issues
The first is to handle the much-reported (by the build systems)
problem that superH does not boot anymore.
The second handles an issue in the new platform logic that a number of
people ran into with the automated tests in kbuild
Both of these have been in linux-next with no reported issues"
* tag 'driver-core-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: Fix boot problem on SuperH
of/platform: Unconditionally pause/resume sync state during kernel init
Linus Torvalds [Sat, 14 Dec 2019 20:43:57 +0000 (12:43 -0800)]
Merge tag 'staging-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"Here are a number of small staging and IIO driver fixes for reported
issues for 5.5-rc2
Nothing major, a bunch of tiny IIO driver issues resolved, and some
staging driver fixes for things that people ran into with 5.5-rc1.
Full details are in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'staging-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (28 commits)
fbtft: Fix the initialization from property algorithm
staging: rtl8712: fix interface sanity check
staging: rtl8188eu: fix interface sanity check
staging: gigaset: add endpoint-type sanity check
staging: gigaset: fix illegal free on probe errors
staging: gigaset: fix general protection fault on probe
staging: vchiq: call unregister_chrdev_region() when driver registration fails
staging: exfat: fix multiple definition error of `rename_file'
staging/wlan-ng: add CRC32 dependency in Kconfig
staging: hp100: Fix build error without ETHERNET
staging: fbtft: Do not hardcode SPI CS polarity inversion
staging: exfat: properly support discard in clr_alloc_bitmap()
staging/octeon: Mark Ethernet driver as BROKEN
iio: adc: max9611: Fix too short conversion time delay
iio: ad7949: fix channels mixups
iio: imu: st_lsm6dsx: do not power-off accel if events are enabled
iio: imu: st_lsm6dsx: track hw FIFO buffering with fifo_mask
iio: imu: st_lsm6dsx: fix decimation factor estimation
iio: imu: inv_mpu6050: fix temperature reporting using bad unit
iio: humidity: hdc100x: fix IIO_HUMIDITYRELATIVE channel reporting
...
Linus Torvalds [Sat, 14 Dec 2019 20:40:39 +0000 (12:40 -0800)]
Merge tag 'usb-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for reported issues for 5.5-rc2
There's the usual gadget and xhci fixes, as well as some other
problems that syzbot has been finding during it's fuzzing runs. Full
details are in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits)
usb: dwc3: pci: add ID for the Intel Comet Lake -H variant
xhci: make sure interrupts are restored to correct state
xhci: handle some XHCI_TRUST_TX_LENGTH quirks cases as default behaviour.
xhci: Increase STS_HALT timeout in xhci_suspend()
usb: xhci: only set D3hot for pci device
xhci: fix USB3 device initiated resume race with roothub autosuspend
xhci: Fix memory leak in xhci_add_in_port()
USB: Fix incorrect DMA allocations for local memory pool drivers
usb: gadget: fix wrong endpoint desc
usb: dwc3: ep0: Clear started flag on completion
usb: dwc3: gadget: Clear started flag for non-IOC
usb: dwc3: gadget: Fix logical condition
USB: atm: ueagle-atm: add missing endpoint check
USB: adutux: fix interface sanity check
USB: idmouse: fix interface sanity checks
USB: serial: io_edgeport: fix epic endpoint lookup
usb: mon: Fix a deadlock in usbmon between mmap and read
usb: common: usb-conn-gpio: Don't log an error on probe deferral
usb: core: urb: fix URB structure initialization function
usb: typec: fix use after free in typec_register_port()
...
Linus Torvalds [Sat, 14 Dec 2019 19:44:14 +0000 (11:44 -0800)]
Merge tag '5.5-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cfis fixes from Steve French:
"Three small smb3 fixes: this addresses two recent issues reported in
additional testing during rc1, a refcount underflow and a problem with
an intermittent crash in SMB2_open_init"
* tag '5.5-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: Close cached root handle only if it has a lease
SMB3: Fix crash in SMB2_open_init due to uninitialized field in compounding path
smb3: fix refcount underflow warning on unmount when no directory leases
projects / linux.git / log