There are still missing corner cases with cursor interaction and these
fast plane updates on Picasso and Raven2 leading to endless PSTATE
warnings for typical desktop usage depending on the userspace.
This change should be reverted until these issues have been resolved.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110949 Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: David Francis <david.francis@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Thu, 20 Jun 2019 03:56:25 +0000 (23:56 -0400)]
drm/amdgpu: add pmu counters
adding perf event counters
Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jonathan Kim [Thu, 20 Jun 2019 03:37:59 +0000 (23:37 -0400)]
drm/amdgpu: update df_v3_6 for xgmi perfmons (v2)
add pmu attribute groups and structures for perf events.
add sysfs to track available df perfmon counters
fix overflow handling in perfmon counter reads.
v2: squash in fix (Alex)
Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Tue, 18 Jun 2019 15:25:25 +0000 (11:25 -0400)]
drm/amd/display: Fix null-deref on vega20 with xgmi
[Why]
After clkmgr rework it gets initialized after resource pool.
The clkmgr is used in resource pool init for xgmi path.
That causes driver crash on Vega20 with xgmi due to NULL deref.
[How]
Move xgmi compensation code to dce121_clk_mgr_construct()
That also allows to make dce121_clock_patch_xgmi_ss_info()
internal static function.
Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kent Russell [Thu, 13 Jun 2019 13:55:40 +0000 (09:55 -0400)]
drm/amdkfd: Add procfs-style information for KFD processes
Add a folder structure to /sys/class/kfd/kfd/ called proc which contains
subfolders, each representing an active KFD process' PID, containing 1
file: pasid.
Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Fri, 14 Jun 2019 18:03:36 +0000 (14:03 -0400)]
drm/amdgpu: improve HMM error -ENOMEM and -EBUSY handling
Under memory pressure, hmm_range_fault may return error code -ENOMEM
or -EBUSY, change pr_info to pr_debug to remove unnecessary kernel log
message because we will retry restore again.
Call get_user_pages_done if TTM get user pages failed will have
WARN_ONCE kernel calling stack dump log.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
xinhui pan [Fri, 14 Jun 2019 08:06:10 +0000 (16:06 +0800)]
drm/amdgpu: Do error injection even vram reserve fails
As long as the address is mapped with vram, we can do an error
injection.
Signed-off-by: xinhui pan <xinhui.pan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Arnd Bergmann [Mon, 17 Jun 2019 12:51:45 +0000 (14:51 +0200)]
drm/amdgpu: fix error handling in df_v3_6_pmc_start
When df_v3_6_pmc_get_ctrl_settings() fails for some reason, we
store uninitialized data in a register, as gcc points out:
drivers/gpu/drm/amd/amdgpu/df_v3_6.c: In function 'df_v3_6_pmc_start':
drivers/gpu/drm/amd/amdgpu/amdgpu.h:1012:29: error: 'lo_val' may be used uninitialized in this function [-Werror=maybe-uninitialized]
#define WREG32_PCIE(reg, v) adev->pcie_wreg(adev, (reg), (v))
^~~~
drivers/gpu/drm/amd/amdgpu/df_v3_6.c:334:39: note: 'lo_val' was declared here
uint32_t lo_base_addr, hi_base_addr, lo_val, hi_val;
^~~~~~
Make it return a proper error code that we can catch in the caller.
Fixes: 992af942a6cf ("drm/amdgpu: add df perfmon regs and funcs for xgmi") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Sat, 15 Jun 2019 00:39:55 +0000 (19:39 -0500)]
Revert "drm/amdkfd: Fix a circular lock dependency"
This reverts commit 06b89b38f3cc518a761164f9f958a9607bbb3587.
This fix is not proper. allocate_mqd can't be moved before
allocate_sdma_queue as it depends on q->properties->sdma_id
set in later.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Philip Yang <philip.yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit f77dac6cd62e5d4bcadd740620af1218bfb54cc6.
This fix is not proper. allocate_mqd can't be moved before
allocate_sdma_queue as it depends on q->properties->sdma_id
set in later.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Philip Yang <philip.yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Mon, 10 Jun 2019 17:23:41 +0000 (13:23 -0400)]
drm/amdgpu: explicitly set mmGDS_VMID0_BASE to 0
Explicitly set mmGDS_VMID0_BASE to 0. Also update
GDS_VMID0_BASE/_SIZE with direct register writes.
Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hariprasad Kelam [Thu, 13 Jun 2019 02:32:08 +0000 (08:02 +0530)]
drm/amd/display: fix compilation error
this patch fixes below compilation error
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c: In
function ‘dcn10_apply_ctx_for_surface’:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:2378:3:
error: implicit declaration of function ‘udelay’
[-Werror=implicit-function-declaration]
udelay(underflow_check_delay_us);
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_dm: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: David Francis <David.Francis@amd.com> Cc: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Cc: Anthony Koo <Anthony.Koo@amd.com> Cc: hersen wu <hersenxs.wu@amd.com> Cc: "Leo (Hanghong) Ma" <hanghong.ma@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdkfd: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: xinhui pan <xinhui.pan@amd.com> Cc: Evan Quan <evan.quan@amd.com> Cc: Feifei Xu <Feifei.Xu@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
radeon: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Marek Olšák [Wed, 5 Jun 2019 02:48:29 +0000 (22:48 -0400)]
drm/amdgpu: bump the DRM version for GDS ENOMEM fixes
So userspace knows when this fix is available.
Signed-off-by: Marek Olšák <marek.olsak@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 11 Jun 2019 14:45:51 +0000 (09:45 -0500)]
drm/amdgpu: return 0 by default in amdgpu_pm_load_smu_firmware
Fixes SI cards running on amdgpu.
Fixes: 1929059893022 ("drm/amd/amdgpu: add RLC firmware to support raven1 refresh")
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=110883 Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Tue, 11 Jun 2019 16:15:00 +0000 (11:15 -0500)]
drm/amdgpu: Reserve space for shared fence
Call reservation_object_reserve_shared to reserve
space for shared fence. Otherwise it will trigger
BUG_ON condition in reservation_object_add_shared_fence.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Acked-by: Christian Konig <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Mon, 10 Jun 2019 13:53:58 +0000 (09:53 -0400)]
drm/amd/amdgpu: Bail out of BO node creation if not enough VRAM (v3)
(v2): Return 0 and set mem->mm_node to NULL.
(v3): Use atomic64_add_return instead.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yintian Tao [Wed, 5 Jun 2019 12:40:08 +0000 (20:40 +0800)]
drm/amdgpu: register pm sysfs for sriov (v2)
we need register pm sysfs for virt in order
to support dpm level modification because
smu ip block will not be added under SRIOV
v2: whitespace fixes (Alex)
Signed-off-by: Yintian Tao <yttao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Mon, 10 Jun 2019 19:44:07 +0000 (14:44 -0500)]
drm/amdkfd: Add device to topology after it is completely inited
We can't have devices that are not completely initialized in kfd topology.
Otherwise it is a race condition when user access not completely
initialized device. This also addresses a kfd_topology_add_device accessing
NULL dqm pointer issue.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Mon, 10 Jun 2019 20:22:35 +0000 (15:22 -0500)]
drm/amdkfd: Initialize HSA_CAP_ATS_PRESENT capability in topology codes
Move HSA_CAP_ATS_PRESENT initialization logic from kfd iommu codes to
kfd topology codes. This removes kfd_iommu_device_init's dependency
on kfd_topology_add_device. Also remove duplicate code setting the
same.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA queue allocation requires the dqm lock at it modify
the global dqm members. Move up the dqm_lock so sdma
queue allocation is enclosed in the critical section. Move
mqd allocation out of critical section to avoid circular
lock dependency.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Tue, 4 Jun 2019 02:25:52 +0000 (21:25 -0500)]
drm/amdkfd: Separate mqd allocation and initialization
Introduce a new mqd allocation interface and split the original
init_mqd function into two functions: allocate_mqd and init_mqd.
Also renamed uninit_mqd to free_mqd. This is preparation work to
fix a circular lock dependency.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Fri, 31 May 2019 21:05:59 +0000 (16:05 -0500)]
drm/amdkfd: Refactor create_queue_nocpsch
This is prepare work to fix a circular lock dependency.
No logic change
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Mon, 3 Jun 2019 17:28:13 +0000 (12:28 -0500)]
drm/amdkfd: Only load sdma mqd when queue is active
Also calls load_mqd with current->mm struct. The mm
struct is used to read back user wptr of the queue.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Fri, 31 May 2019 20:07:42 +0000 (15:07 -0500)]
drm/amdkfd: Only initialize sdma vm for sdma queues
Don't do the same for compute queues
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Wed, 29 May 2019 13:52:16 +0000 (09:52 -0400)]
drm/amdgpu: use new HMM APIs and helpers
HMM provides new APIs and helps in kernel 5.2-rc1 to simplify driver
path. The old hmm APIs are deprecated and will be removed in future.
Below are changes in driver:
1. Change hmm_vma_fault to hmm_range_register and hmm_range_fault which
supports range with multiple vmas, remove the multiple vmas handle path
and data structure.
2. Change hmm_vma_range_done to hmm_range_unregister.
3. Use default flags to avoid pre-fill pfn arrays.
4. Use new hmm_device_ helpers.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dan Carpenter [Sat, 8 Jun 2019 09:23:57 +0000 (12:23 +0300)]
drm/amdgpu: Fix bounds checking in amdgpu_ras_is_supported()
The "block" variable can be set by the user through debugfs, so it can
be quite large which leads to shift wrapping here. This means we report
a "block" as supported when it's not, and that leads to array overflows
later on.
This bug is not really a security issue in real life, because debugfs is
generally root only.
Fixes: 36ea1bd2d084 ("drm/amdgpu: add debugfs ctrl node") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kent Russell [Tue, 11 Jun 2019 12:33:49 +0000 (08:33 -0400)]
drm/amdgpu: Add CHIP_VEGAM to amdgpu_amdkfd_device_probe
We have the rest of the support in the kerne, but we don't actually boot KFD
on the device without this change
Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Samson Tam [Tue, 28 May 2019 18:44:40 +0000 (14:44 -0400)]
drm/amd/display: set link->dongle_max_pix_clk to 0 on a disconnect
[Why]
Found issue in EDID Emulation where if we connect a display using
a passive HDMI-DP dongle, disconnect it and then try to emulate
a display using DP, we could not see 4K modes. This was because
on a disconnect, dongle_max_pix_clk was still set so when we
emulate using DP, in dc_link_validate_mode_timing(), it would
think we were still using a dongle and limit the modes we support.
[How]
In dc_link_detect(), set dongle_max_pix_clk to 0 when we detect
a hotplug out ( if new_connection_type = dc_connection_none ).
Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Su Sung Chung [Thu, 30 May 2019 18:59:03 +0000 (14:59 -0400)]
drm/amd/display: make clk_mgr call enable_pme_wa
refactor a code so we will call clk_mgr's enable_pme_wa function so we
can use pme_wa for future asics. This way we don't need to worry about
different ASIC since clk_mgr already have that information
Signed-off-by: Su Sung Chung <Su.Chung@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: S3 Resume time increase after decoupling DPMS from fast boot
[Why]
We incorrectly began powering down the display at boot/resume whenever
fast boot was not possible. This should not be done in the case where there
exists a stream for the eDP since this implies that we want to turn it on.
[How]
Add check for eDP stream to decide whether to power off edp.
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Reza Amini <Reza.Amini@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wesley Chalmers [Wed, 29 May 2019 18:38:53 +0000 (14:38 -0400)]
drm/amd/display: Use stream opp_id instead of hubp
[WHY]
By the time output csc matrix is being programmed, stream connection to
OPP has been established, but this information has not been relayed back
to HUBP.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harmanprit Tatla [Mon, 27 May 2019 18:22:30 +0000 (14:22 -0400)]
drm/amd/display: Gamma logic limitations causing unintended use of RAM over ROM.
[Why]
Our existing logic in deciding whether to use RAM or ROM
depends on whether we are dealing with an identity gamma ramp.
[How]
In addition to the is_identity flag
a new is_logical_identity flag has been
added. The is_identity flag now denotes
whether the OS gamma is an RGB256 identity
and the new logical identity will inidicate
that the given gamma ramp regardless of its
type is identity.
Signed-off-by: Harmanprit Tatla <harmanprit.tatla@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thomas Lim [Mon, 29 Apr 2019 20:05:42 +0000 (16:05 -0400)]
drm/amd/display: Add Underflow Asserts to dc
[Why]
For debugging underflow issues it can be useful to have asserts when the
underflow initially occurs.
[How]
Read the underflow status registers after actions that have a high risk
of causing underflow and assert that no underflow occurred. If underflow
occurred, clear the bit.
Signed-off-by: Thomas Lim <Thomas.Lim@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chris Park [Fri, 24 May 2019 20:40:30 +0000 (16:40 -0400)]
drm/amd/display: Clean up scdc_test_data struct
These are no longer needed, Also added RESERVED bits.
Signed-off-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Thu, 23 May 2019 01:17:38 +0000 (21:17 -0400)]
drm/amd/display: fix issue with eDP not detected on driver load
[Why]
HPD not going to be high if Panel VDD is off
And all AUX transaction will fail :(
[How]
1. Power on VDD before attempting detection if it isn't already on
2. Improve the robustness by having a retry mechanism on the
first DPCD read after VDD on. If a particular board always holds
HPD high incorrectly, the AUX access may fail, so we can retry
in those scenarios. This change would only improve logic
since it prevents AUX failure leading to bad resolution on internal
panel.
3. We should never need to re-detect internal panel, so logic
is re-arranged a bit to skip earlier.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To prepare for the upcoming DRM plane color management properties
we need to correct a lot of wrong behavior and assumptions made for
CRTC color management.
The documentation added by this commit in amdgpu_dm_color explains
how the HW color pipeline works and its limitations with the DRM
interface.
The current implementation does the following wrong:
- Implicit sRGB DGM when no CRTC DGM is set
- Implicit sRGB RGM when no CRTC RGM is set
- No way to specify a non-linear DGM matrix that produces correct output
- No way to specify a correct RGM when a linear DGM is used
We had workarounds for passing kms_color tests but not all of the
behavior we had wrong was covered by these tests (especially when
it comes to non-linear DGM). Testing both DGM and RGM at the same time
isn't something kms_color tests well either.
[How]
The specifics for how color management works in AMDGPU and the new
behavior can be found by reading the documentation added to
amdgpu_dm_color.c from this patch.
All of the incorrect cases from the old implementation have been
addressed for the atomic interface, but there still a few TODOs for
the legacy one.
Note: this does cause regressions for kms_color@pipe-a-ctm-* over HDMI.
The result looks correct from visual inspection but the CRC no longer
matches. For reference, the test was previously doing the following:
linear degamma -> CTM -> sRGB regamma -> RGB to YUV (709) -> ...
Now the test is doing:
linear degamma -> CTM -> linear regamma -> RGB to YUV (709) -> ...
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Thu, 23 May 2019 19:27:43 +0000 (15:27 -0400)]
drm/amd/display: add audio related regs
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Derek Lai [Wed, 22 May 2019 06:49:23 +0000 (14:49 +0800)]
drm/amd/display: add i2c_hw_Status check to make sure as HW I2c in use
1. Add i2c_hw_Status check to make sure when HW i2c is in use.
2. Don't reset HW engine in is_hw_busy() and instead do this in
process_transaction() because SW i2c does not check if hw i2c is in use
Signed-off-by: Derek Lai <Derek.Lai@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Almost every function in DC that works with stream state expects that
the current state on the stream is the one that it should be writing
out. These functions are typically triggered by specifying a particular
stream update - but the actual contents of the stream update itself
are ignored, leaving it to the DM to actually update the stream state
itself.
The problem with doing this in DM is a matter of timing. On Linux
most of this is incorrectly done in atomic check, when we actually want
it to be done during atomic commit tail while access to DC is locked.
To give an example, a commit requesting to modify color management
state for DM could come in, be rejected, but still have modified
the actual system state for the stream since it's shared memory. The
next time color management gets programmed it'll use the rejected
color management info - which might not even still be around if it's
a custom transfer function.
So a reasonable place to perform this is within DC itself and this is
the model that's currently in use for surface updates. DC can even
compare the current system state to the incoming surface update to
determine update level, something that can't currnetly be done with the
framework for stream updates.
[How]
Duplicate the framework used for surface updates for stream updates
as well. Copy all the updates after checking the update type.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wesley Chalmers [Thu, 16 May 2019 16:40:25 +0000 (12:40 -0400)]
drm/amd/display: Update link rate from DPCD 10
[WHY]
Some panels return a link rate of 0 (unknown) in DPCD 0. In this case,
an appropriate mode cannot be set, and certain panels will show
corruption as they are forced to use a mode they do not support.
[HOW]
Read DPCD 10 in the case where supported link rate from DPCD 0 is
unknown, and pass that value on to the reported link rate.
This re-introduces behaviour present in previous versions that appears
to have been accidentally removed.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tao.Huang [Mon, 6 May 2019 08:26:54 +0000 (16:26 +0800)]
drm/amd/display: fix resource saving missing when power state switch
Signed-off-by: Tao.Huang <Tao.Huang@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Set default ABM level to module parameter
[Why]
The module parameter to specify the default ABM level is now defined,
so hook it up in DM.
[How]
On connector reset specify the default level. DC will program this as
part of the modeset since it gets passed onto the stream in
dm_update_crtc_state.
It's only set for eDP connectors, but it doesn't matter if this is
specified for connectors or hardware that doesn't support ABM.
It's DC's responsibility to check that ABM can be set or adjusted, and
DC does check that the DMCU firmware is running and if there's backlight
control available.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: David Francis <david.francis@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Add module parameter for specifying default ABM level
[Why]
It's non trivial to configure or specify an ABM reduction level for
userspace outside of X. There is also no method to specify the default
ABM value at boot time.
A parameter should be added to configure this.
[How]
Expose a module parameter that can specify the default ABM level to
use for eDP connectors on DC enabled hardware that loads the DMCU
firmware.
The default is still disabled (0), but levels can range from 1-4. Levels
control how much the backlight can be reduced, with being the least
amount of reduction and four being the most reduction.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: David Francis <david.francis@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Fri, 7 Jun 2019 10:56:18 +0000 (18:56 +0800)]
drm/amdgpu: drop the incorrect soft_reset for SRIOV
It's incorrect to do soft reset for SRIOV, when GFX
hang the WREG would stuck there becuase it goes KIQ way.
the GPU reset counter is incorrect: always increase twice
for each timedout
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Fri, 7 Jun 2019 16:19:05 +0000 (12:19 -0400)]
drm/amdgpu: Add GDS clearing workaround in later init for gfx9
Since Hardware bug, GDS exist ECC error after cold boot up,
adding GDS clearing workaround in later init for gfx9.
Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Enable fast plane updates when state->allow_modeset = true
[Why]
Whenever the a modeset is allowed (but not neccessarily required) we
currently recreate all the planes in the state. Most IGT tests and
legacy IOCTLs create atomic commits with this flag set, so the pipes
are often unnecessarily reprogrammed.
Poor performance and stuttering can occur when many of these commits
are frequently issued.
This flag was needed when the appropriate conditions for checking
whether the planes needed a reset were not in place, but
should_reset_plane should cover everything needed now.
[How]
Drop the check for state->allow_modeset in should_reset_plane.
All planes on a CRTC should reset in the following conditions:
- The CRTC needs a modeset
- The CRTC degamma changes
- Planes are added or removed to the CRTC
These conditions are all covered in should_reset_plane.
We still can't drop the format change check in should_reset_plane since
fill_dc_plane_info_and_addr isn't called when validating the state, so
we can't tell if a FULL update is needed or not.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: David Francis <david.francis@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Use current connector state if NULL when checking bpc
[Why]
The old logic for checking which output depth to use relied on using
the current connector state rather than the new proposed state. This
was a problem when performing atomic commits since we weren't verifying
it against the incoming max_requested_bpc.
But switching this to only use the new state and not the current state
breaks filtering modes - it'll always assume that the maximum bpc
supported by the display is in use, which will cause certain modes
like 1440p@144Hz to be filtered even when using 8bpc.
[How]
Still use the connector->state if we aren't passed an explicit state.
This will respect the max_bpc the user currently has when filtering
modes.
Also remember to reset the default max_requested_bpc to 8 whenever
connector reset is called to retain old behavior when using the new
property.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110845 Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This option is no longer needed. The default code paths
are now the only option.
v2: Add HPAGE support and a default for non contiguous maps
v3: Misread 512 pages as MiB ...
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Always allocate initial connector state state
[Why]
Unlike our regular connectors, MST connectors don't start off with
an initial connector state. This causes a NULL pointer dereference to
occur when attaching the bpc property since it tries to modify the
connector state.
We need an initial connector state on the connector to avoid the crash.
[How]
Use our reset helper to allocate an initial state and reset the values
to their defaults. We were already doing this before, just not for
MST connectors.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: David Francis <David.Francis@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shirish S [Tue, 4 Jun 2019 15:55:03 +0000 (21:25 +0530)]
drm/amdgpu/{uvd,vcn}: fetch ring's read_ptr after alloc
[What]
readptr read always returns zero, since most likely
these blocks are either power or clock gated.
[How]
fetch rptr after amdgpu_ring_alloc() which informs
the power management code that the block is about to be
used and hence the gating is turned off.
Signed-off-by: Louis Li <Ching-shih.Li@amd.com> Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Louis Li [Fri, 24 May 2019 22:39:47 +0000 (06:39 +0800)]
drm/amdgpu: fix ring test failure issue during s3 in vce 3.0 (V2)
[What]
vce ring test fails consistently during resume in s3 cycle, due to
mismatch read & write pointers.
On debug/analysis its found that rptr to be compared is not being
correctly updated/read, which leads to this failure.
Below is the failure signature:
[drm:amdgpu_vce_ring_test_ring] *ERROR* amdgpu: ring 12 test failed
[drm:amdgpu_device_ip_resume_phase2] *ERROR* resume of IP block <vce_v3_0> failed -110
[drm:amdgpu_device_resume] *ERROR* amdgpu_device_ip_resume failed (-110).
[How]
fetch rptr appropriately, meaning move its read location further down
in the code flow.
With this patch applied the s3 failure is no more seen for >5k s3 cycles,
which otherwise is pretty consistent.
V2: remove reduntant fetch of rptr
Signed-off-by: Louis Li <Ching-shih.Li@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jay Cornwall [Tue, 19 Jun 2018 15:17:30 +0000 (10:17 -0500)]
drm/amdkfd: Implement queue priority controls for gfx9
Ported from gfx8, no changes in register setup.
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>