Akinobu Mita [Sun, 17 Feb 2019 15:17:47 +0000 (10:17 -0500)]
media: ov7740: fix runtime pm initialization
The runtime PM of this device is enabled after v4l2_ctrl_handler_setup(),
and this makes this device's runtime PM usage count a negative value.
The ov7740_set_ctrl() tries to do something only if the device's runtime
PM usage counter is nonzero.
ov7740_set_ctrl()
{
if (!pm_runtime_get_if_in_use(&client->dev))
return 0;
<do something>;
pm_runtime_put(&client->dev);
return ret;
}
However, the ov7740_set_ctrl() is called by v4l2_ctrl_handler_setup()
while the runtime PM of this device is not yet enabled. In this case,
the pm_runtime_get_if_in_use() returns -EINVAL (!= 0).
Therefore we can't bail out of this function and the usage count is
decreased by pm_runtime_put() without increment.
This fixes this problem by enabling the runtime PM of this device before
v4l2_ctrl_handler_setup() so that the ov7740_set_ctrl() is always called
when the runtime PM is enabled.
Cc: Wenyou Yang <wenyou.yang@microchip.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Tested-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Dafna Hirschfeld [Fri, 15 Feb 2019 20:58:53 +0000 (15:58 -0500)]
media: vicodec: Add a flag for I-frames in fwht header
Add a flag 'FWHT_FL_I_FRAME' that indicates that
this is an I-frame. This requires incrementing
to version 3
This flag is needed for the upcoming stateless FWHT
decoder since it has to know if an encoded frame is
an I or a P frame.
Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com>
[hverkuil-cisco@xs4all.nl: added the last paragraph of the commit msg] Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
media: cedrus: Forbid setting new formats on busy queues
Check that our queues are not busy before setting the format or return
EBUSY if that's the case. This ensures that our format can't change
once buffers are allocated for the queue.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Colin Ian King [Wed, 13 Feb 2019 13:25:59 +0000 (08:25 -0500)]
media: exynos4-is: remove redundant check on type
The check to see if type is V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE is redundant
as this has been already checked at the start of the function and if
it's not that value then -ENOSYS is returned. Hence the sprintf can be
replaced by a simpler string copy.
Detected by CoverityScan, CID#1309450 ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
In every case, the actual return type is a struct vb2_v4l2_buffer
pointer. Change the return type of the listed functions,
so type checking can be properly used.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: clean up line-too-long checkpatch warnings] Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Tim Harvey [Tue, 5 Feb 2019 16:23:36 +0000 (11:23 -0500)]
media: tda1997x: fix get_edid
set_edid never wrote the new EDID to state->edid.edid, it was only
written to the hardware. Since get_edid returned state->edid.edid,
it was never returning the right EDID.
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: added missing commit log] Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Chen-Yu Tsai [Sun, 3 Feb 2019 16:03:58 +0000 (11:03 -0500)]
media: sun6i: Add support for JPEG media bus format
The CSI controller can take raw data from the data bus and output it
directly to capture buffers. This can be used to support the JPEG media
bus format.
While the controller can report minimum and maximum bytes per line, it
has no way to report how many lines were captured in the last frame.
Thus, even when the on-bus data is framed correctly, we have no way to
accertain the actual amount of data captured, unless we scan the buffer
for JPEG EOI markers, or sequential zeros. For now we leave bytesused
alone, and leave it up to userspace applications to parse the data.
Chen-Yu Tsai [Sun, 3 Feb 2019 16:03:57 +0000 (11:03 -0500)]
media: sun6i: Add support for RGB565 formats
The CSI controller can take raw data from the data bus and output RGB565
format. The controller does not distinguish between RGB565 LE and BE.
Instead this is determined by the media bus format, i.e. the format or
order the sensor is sending data in.
Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Chen-Yu Tsai [Sun, 3 Feb 2019 16:03:56 +0000 (11:03 -0500)]
media: sun6i: Fix CSI regmap's max_register
max_register is currently set to 0x1000. This is beyond the mapped
address range of the hardware, so attempts to dump the regmap from
debugfs would trigger a kernel exception.
Furthermore, the useful registers only occupy a small section at the
beginning of the full range. Change the value to 0x9c, the last known
register on the V3s and H3.
On the A31, the register range is extended to support additional
capture channels. Since this is not yet supported, ignore it for now.
Fixes: 5cc7522d8965 ("media: sun6i: Add support for Allwinner CSI V3s") Cc: <stable@vger.kernel.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Thu, 7 Feb 2019 09:13:36 +0000 (04:13 -0500)]
media: vsp1: Fix smatch warning
drivers/media/platform/vsp1/vsp1_drm.c: drivers/media/platform/vsp1/vsp1_drm.c:336 vsp1_du_pipeline_setup_brx() error: we previously assumed 'pipe->brx' could be null (see line 244)
smatch missed that if pipe->brx was NULL, then later on it will be
set with a non-NULL value. But it is easier to just use the brx pointer
so smatch doesn't get confused.
Hans Verkuil [Fri, 1 Feb 2019 09:57:31 +0000 (04:57 -0500)]
media: uvcvideo: Use usb_make_path to fill in usb_info
The uvc driver uses this function to fill in bus_info for VIDIOC_QUERYCAP,
so use the same function when filling in the bus_info for the media device.
The current implementation only fills in part of the info. E.g. if the full
bus_info is usb-0000:01:00.0-1.4.2, then the media bus_info only has 1.4.2.
Hans Verkuil [Thu, 7 Feb 2019 09:13:35 +0000 (04:13 -0500)]
media: uvcvideo: Fix smatch warning
drivers/media/usb/uvc/uvc_video.c: drivers/media/usb/uvc/uvc_video.c:1893 uvc_video_start_transfer() warn: argument 2 to %u specifier is cast from pointer
Jagan Teki [Mon, 28 Jan 2019 08:58:44 +0000 (03:58 -0500)]
media: sun6i: Add A64 CSI block support
CSI block in Allwinner A64 has similar features as like in H3,
but the default CSI_SCLK rate cannot work properly to drive the
connected sensor interface.
The tested mod cock rate is 300 MHz and BSP vfe media driver is also
using the same rate. Unfortunately there is no valid information about
clock rate in manual or any other sources except the BSP driver. so more
faith on BSP code, because same has tested in mainline.
So, add support for A64 CSI block by setting updated mod clock rate.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Fri, 8 Feb 2019 09:53:50 +0000 (10:53 +0100)]
extended-controls.rst: split up per control class
The extended-controls.rst file had become too big. Split it up: each
control class reference gets its own rst file, and this file just
describes the Extended Control API.
Each control class reference is also moved up one level into the
table of contents to make it easier to find e.g. the codec control
reference.
Finally I rearranged the order so that all camera-related control
classes are grouped together, ditto for codec/jpeg and fm-rx/tx.
The ext-ctrls-codec.rst is still pretty big and it is a candidate
to split up further in the future, possibly per codec.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Thu, 7 Feb 2019 11:49:48 +0000 (06:49 -0500)]
media: dvb-core: fix epoll() by calling poll_wait first
The epoll function expects that whenever the poll file op is
called, the poll_wait function is also called. That didn't
always happen in dvb_demux_poll(), dvb_dvr_poll() and
dvb_ca_en50221_io_poll(). Fix this, otherwise epoll()
can timeout when it shouldn't.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Thu, 7 Feb 2019 11:49:47 +0000 (06:49 -0500)]
media: videobuf: fix epoll() by calling poll_wait first
The epoll function expects that whenever the poll file op is
called, the poll_wait function is also called. That didn't
always happen in videobuf_poll_stream(). Fix this, otherwise
epoll() would timeout when it shouldn't.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Thu, 7 Feb 2019 11:49:45 +0000 (06:49 -0500)]
media: v4l2-mem2mem: fix epoll() by calling poll_wait first
The epoll function expects that whenever the poll file op is
called, the poll_wait function is also called. That didn't
always happen in v4l2_m2m_poll(). Fix this, otherwise
epoll() would timeout when it shouldn't.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Thu, 7 Feb 2019 11:49:44 +0000 (06:49 -0500)]
media: v4l2-ctrls.c: fix epoll() by calling poll_wait first
The epoll function expects that whenever the poll file op is
called, the poll_wait function is also called. That didn't
always happen in v4l2_ctrl_poll(). Fix this, otherwise epoll()
would timeout when it shouldn't.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Thu, 7 Feb 2019 11:49:43 +0000 (06:49 -0500)]
media: vb2: fix epoll() by calling poll_wait first
The epoll function expects that whenever the poll file op is
called, the poll_wait function is also called. That didn't
always happen in vb2_core_poll() and vb2_poll(). Fix this,
otherwise epoll() would timeout when it shouldn't.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: Yi Qingliang <niqingliang2003@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Thu, 7 Feb 2019 11:49:42 +0000 (06:49 -0500)]
media: media-request: fix epoll() by calling poll_wait first
The epoll function expects that whenever the poll file op is
called, the poll_wait function is also called. That didn't
always happen in media_request_poll(). Fix this, otherwise
epoll() would timeout when it shouldn't.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Thu, 7 Feb 2019 11:49:41 +0000 (06:49 -0500)]
media: cec: fix epoll() by calling poll_wait first
The epoll function expects that whenever the poll file op is
called, the poll_wait function is also called. That didn't
always happen in cec_poll(). Fix this, otherwise epoll()
would timeout when it shouldn't.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Mon, 4 Feb 2019 10:11:33 +0000 (05:11 -0500)]
media: vb2: keep track of timestamp status
If a stream is stopped, or if a USERPTR/DMABUF buffer is queued
backed by a different user address or dmabuf fd, then the timestamp
should be skipped by vb2_find_timestamp since the memory it refers
to is no longer valid.
So keep track of a 'copied_timestamp' state: it is set when the
timestamp is copied from an output to a capture buffer, and is
cleared when it is no longer valid.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Vivek Kasireddy [Sat, 9 Feb 2019 01:38:18 +0000 (20:38 -0500)]
media: imx-pxp: Start using the format VUYA32 instead of YUV32 (v2)
Buffers generated with YUV32 format seems to be incorrect, hence use
VUYA32 instead.
Changes from v1:
Add both formats VUYA32 and VUYX32 but associate only VUYX32 to the
output queue as the alpha channel of buffers is ignored on this queue.
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Vivek Kasireddy [Fri, 8 Feb 2019 03:18:43 +0000 (22:18 -0500)]
media: v4l: Add 32-bit packed YUV formats
The formats added in this patch include:
V4L2_PIX_FMT_AYUV32
V4L2_PIX_FMT_XYUV32
V4L2_PIX_FMT_VUYA32
V4L2_PIX_FMT_VUYX32
These formats enable the trasmission of alpha channel data to other
drivers and userspace applications in addition to YUV data. For
example, buffers generated by drivers in one of these formats
can be used by the Weston compositor to display as a texture or
flipped directly onto the overlay planes with the help of a DRM
driver.
Cody P Schafer [Tue, 15 Jan 2019 00:14:24 +0000 (19:14 -0500)]
media: cx25840: mark pad sig_types to fix cx231xx init
Without this, we get failures like this when the kernel attempts to
initialize a cx231xx device:
[16046.153653] cx231xx 3-1.2:1.1: New device Hauppauge Hauppauge Device @ 480 Mbps (2040:c200) with 6 interfaces
[16046.153900] cx231xx 3-1.2:1.1: can't change interface 3 alt no. to 3: Max. Pkt size = 0
[16046.153907] cx231xx 3-1.2:1.1: Identified as Hauppauge USB Live 2 (card=9)
[16046.154350] i2c i2c-11: Added multiplexed i2c bus 13
[16046.154379] i2c i2c-11: Added multiplexed i2c bus 14
[16046.267194] cx25840 10-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0-0)
[16048.424551] cx25840 10-0044: loaded v4l-cx231xx-avcore-01.fw firmware (16382 bytes)
[16048.463224] cx231xx 3-1.2:1.1: v4l2 driver version 0.0.3
[16048.567878] cx231xx 3-1.2:1.1: Registered video device video2 [v4l2]
[16048.568001] cx231xx 3-1.2:1.1: Registered VBI device vbi0
[16048.568419] cx231xx 3-1.2:1.1: audio EndPoint Addr 0x83, Alternate settings: 3
[16048.568425] cx231xx 3-1.2:1.1: video EndPoint Addr 0x84, Alternate settings: 5
[16048.568431] cx231xx 3-1.2:1.1: VBI EndPoint Addr 0x85, Alternate settings: 2
[16048.568436] cx231xx 3-1.2:1.1: sliced CC EndPoint Addr 0x86, Alternate settings: 2
[16048.568448] usb 3-1.2: couldn't get decoder output pad for V4L I/O
[16048.568453] cx231xx 3-1.2:1.1: V4L2 device vbi0 deregistered
[16048.568579] cx231xx 3-1.2:1.1: V4L2 device video2 deregistered
[16048.569001] cx231xx: probe of 3-1.2:1.1 failed with error -22
Likely a regession since Commit 9d6d20e652c0
("media: v4l2-mc: switch it to use the new approach to setup pipelines")
(v4.19-rc1-100-g9d6d20e652c0), which introduced the use of
PAD_SIGNAL_DV within v4l2_mc_create_media_graph().
This also modifies cx25840 to remove the VBI pad, matching the action
taken in Commit 092a37875a22 ("media: v4l2: remove VBI output pad").
Fixes: 9d6d20e652c0 ("media: v4l2-mc: switch it to use the new approach to setup pipelines") Cc: stable@vger.kernel.org Signed-off-by: Cody P Schafer <dev@codyps.com> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There is a spelling mistake in a fmdbg debug message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Sakari Ailus [Thu, 7 Feb 2019 13:50:48 +0000 (08:50 -0500)]
media: soc_camera: Depend on BROKEN
This patch makes the SoC camera framework as well as effectively the few
remaining sensor drivers depend on BROKEN, rendering it uncompileable
without changes in Kconfig.
The purpose is to leave the code around if someone wishes to convert the
drivers to the modern day V4L2 sub-device framework without having to go
to see development history in git.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Loic Poulain [Wed, 30 Jan 2019 16:48:07 +0000 (11:48 -0500)]
media: i2c: ov5640: Fix post-reset delay
According to the ov5640 specification (2.7 power up sequence), host can
access the sensor's registers 20ms after reset. Trying to access them
before leads to undefined behavior and result in sporadic initialization
errors.
Jagan Teki [Thu, 24 Jan 2019 17:58:01 +0000 (12:58 -0500)]
media: ov5640: Fix set 15fps regression
The ov5640_try_frame_interval operation updates the FPS as per user
input based on default ov5640_frame_rate, OV5640_30_FPS which is failed
to update when user trigger 15fps.
So, initialize the default ov5640_frame_rate to OV5640_15_FPS so-that
it can satisfy to update all fps.
Fixes: 5a3ad937bc78 ("media: ov5640: Make the return rate type more explicit") Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The register value lists for all the supported resolution settings all
include a register address/value pair for setting the JPEG compression
mode. With the exception of 1080p (which sets mode 2), all resolutions
use mode 3.
The only difference between mode 2 and mode 3 is that mode 2 may have
padding data on the last line, while mode 3 does not add padding data.
As these register values were from dumps of running systems, and the
difference between the modes is quite small, using mode 3 for all
configurations should be OK.
Chen-Yu Tsai [Fri, 18 Jan 2019 08:52:05 +0000 (03:52 -0500)]
media: ov5640: Set JPEG output timings when outputting JPEG data
When compression is turned on, the on-bus data is framed according to
the compression mode, and the height and width set in VFIFO_VSIZE and
VFIFO_HSIZE. If these are not updated correctly, the sensor will send
data framed in a manner unexpected by the capture interface, such as
having more bytes per line than expected, and having the extra data
dropped. This ultimately results in corrupted data.
Set the two values when the media bus is configured for JPEG data,
meaning the sensor would be in JPEG mode.
Chen-Yu Tsai [Fri, 18 Jan 2019 08:52:04 +0000 (03:52 -0500)]
media: ov5640: Add three more test patterns
The OV5640 driver currently supports a static color bar pattern with a
small vertical gamma gradient. The hardware also supports a color square
pattern, as well as having a rolling bar for dynamic sequences.
Add three more test patterns:
- color bars with a rolling bar (but without the gamma gradient)
- static color squares
- color squares with a rolling bar
Chen-Yu Tsai [Fri, 18 Jan 2019 08:52:03 +0000 (03:52 -0500)]
media: ov5640: Disable transparent feature for test pattern
The transparent feature for test patterns blends the test pattern with
an actual captured image. This makes the result non-static, subject to
changes in the sensor's field of view.
Test patterns should be predictable and deterministic, even if they are
dynamic patterns. Disable the transparent feature of the test pattern.
Chen-Yu Tsai [Fri, 18 Jan 2019 08:52:01 +0000 (03:52 -0500)]
media: ov5640: Move test_pattern_menu before ov5640_set_ctrl_test_pattern
The OV5640 has many options for generating test patterns. Unfortunately
there is only one V4L2 control for it. Thus the driver would need to
list some or all combinations.
Move the test_pattern_menu list before the ov5640_set_ctrl_test_pattern
function that programs the hardware. This would allow us to add a
matching list of values to program into the hardware, while keeping the
two lists together for ease of maintenance.
Jacopo Mondi [Thu, 10 Jan 2019 14:02:13 +0000 (09:02 -0500)]
media: adv748x: Implement TX link_setup callback
When the adv748x driver is informed about a link being created from HDMI or
AFE to a CSI-2 TX output, the 'link_setup()' callback is invoked. Make
sure to implement proper routing management at link setup time, to route
the selected video stream to the desired TX output.
Jacopo Mondi [Thu, 10 Jan 2019 14:02:12 +0000 (09:02 -0500)]
media: adv748x: Store the TX sink in HDMI/AFE
Both the AFE and HDMI s_stream routines (adv748x_afe_s_stream() and
adv748x_hdmi_s_stream()) have to enable the CSI-2 TX they are streaming video
data to.
With the introduction of dynamic routing between HDMI and AFE entities to
TXA, the video stream sink needs to be set at run time, and not statically
selected as the s_stream functions are currently doing.
To fix this, store a reference to the active CSI-2 TX sink for both HDMI and
AFE sources, and operate on it when starting/stopping the stream.
Jacopo Mondi [Thu, 10 Jan 2019 14:02:11 +0000 (09:02 -0500)]
media: adv748x: Store the source subdevice in TX
The power_up_tx() procedure needs to set a few registers conditionally to
the selected video source, but it currently checks for the provided tx to
be either TXA or TXB.
With the introduction of dynamic routing between HDMI and AFE entities to
TXA, checking which TX the function is operating on is not meaningful anymore.
To fix this, store the subdevice of the source providing video data to the
CSI-2 TX in the 'struct adv748x_csi2' representing the TX and check on it.
Jacopo Mondi [Thu, 10 Jan 2019 14:02:10 +0000 (09:02 -0500)]
media: adv748x: csi2: Link AFE with TXA and TXB
The ADV748x chip supports routing AFE output to either TXA or TXB.
In order to support run-time configuration of video stream path, create an
additional (not enabled) "AFE:8->TXA:0" link, and remove the IMMUTABLE flag
from existing ones.
Remove unused but set variables to clean up the code and avoid
warning.
Signed-off-by: Lucas A. M. Magalhães <lucmaga@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
media: imx: Set capture compose rectangle in capture_device_set_format
The capture compose rectangle was not getting updated when setting
the source subdevice's source pad format. This causes the compose window
to be zero (or not updated) at stream start unless the capture device
format was set explicitly at the capture device node.
Fix by moving the calculation of the capture compose rectangle to
imx_media_mbus_fmt_to_pix_fmt(), and pass the rectangle to
imx_media_capture_device_set_format().
media: vim2m: fix build breakage due to a merge conflict
A merge conflict rised when merging from -rc7. Fix it.
In this specific case, we don't need the if anymore, as the
work_run was moved to its rightful place (struct vim2m_ctx).
Fixes: b3e64e5b0778 ("media: vim2m: use per-file handler work queue") Fixes: 240809ef6630 ("media: vim2m: only cancel work if it is for right context") Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Ezequiel Garcia [Mon, 18 Feb 2019 10:25:42 +0000 (05:25 -0500)]
media: v4l: ioctl: Sanitize num_planes before using it
The linked commit changed s_fmt/try_fmt to fail if num_planes is bogus.
This, however, is against the spec, which mandates drivers
to return a proper num_planes value, without an error.
Replace the num_planes check and instead clamp it to a sane value,
so we still make sure we don't overflow the planes array by accident.
Fixes: 9048b2e15b11c5 ("media: v4l: ioctl: Validate num_planes before using it") Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* tag 'v5.0-rc7': (1667 commits)
Linux 5.0-rc7
Input: elan_i2c - add ACPI ID for touchpad in Lenovo V330-15ISK
Input: st-keyscan - fix potential zalloc NULL dereference
Input: apanel - switch to using brightness_set_blocking()
powerpc/64s: Fix possible corruption on big endian due to pgd/pud_present()
efi/arm: Revert "Defer persistent reservations until after paging_init()"
arm64, mm, efi: Account for GICv3 LPI tables in static memblock reserve table
sunrpc: fix 4 more call sites that were using stack memory with a scatterlist
include/linux/module.h: copy __init/__exit attrs to init/cleanup_module
Compiler Attributes: add support for __copy (gcc >= 9)
lib/crc32.c: mark crc32_le_base/__crc32c_le_base aliases as __pure
auxdisplay: ht16k33: fix potential user-after-free on module unload
x86/platform/UV: Use efi_runtime_lock to serialise BIOS calls
i2c: bcm2835: Clear current buffer pointers and counts after a transfer
i2c: cadence: Fix the hold bit setting
drm: Use array_size() when creating lease
dm thin: fix bug where bio that overwrites thin block ignores FUA
Revert "exec: load_script: don't blindly truncate shebang string"
Revert "gfs2: read journal in large chunks to locate the head"
net: ethernet: freescale: set FEC ethtool regs version
...
Linus Torvalds [Sun, 17 Feb 2019 17:22:01 +0000 (09:22 -0800)]
Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"This tree reverts a GICv3 commit (which was broken) and fixes it in
another way, by adding a memblock build-time entries quirk for ARM64"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/arm: Revert "Defer persistent reservations until after paging_init()"
arm64, mm, efi: Account for GICv3 LPI tables in static memblock reserve table
Linus Torvalds [Sun, 17 Feb 2019 16:44:38 +0000 (08:44 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Three changes:
- An UV fix/quirk to pull UV BIOS calls into the efi_runtime_lock
locking regime. (This done by aliasing __efi_uv_runtime_lock to
efi_runtime_lock, which should make the quirk nature obvious and
maintain the general policy that the EFI lock (name...) isn't
exposed to drivers.)
- Our version of MAGA: Make a.out Great Again.
- Add a new Intel model name enumerator to an upstream header to help
reduce dependencies going forward"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/UV: Use efi_runtime_lock to serialise BIOS calls
x86/CPU: Add Icelake model number
x86/a.out: Clear the dump structure initially
Linus Torvalds [Sun, 17 Feb 2019 16:38:13 +0000 (08:38 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Two fixes on the kernel side: fix an over-eager condition that failed
larger perf ring-buffer sizes, plus fix crashes in the Intel BTS code
for a corner case, found by fuzzing"
Linus Torvalds [Sun, 17 Feb 2019 16:36:21 +0000 (08:36 -0800)]
Merge tag 'powerpc-5.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"Just one fix, for pgd/pud_present() which were broken on big endian
since v4.20, leading to possible data corruption.
Thanks to: Aneesh Kumar K.V., Erhard F., Jan Kara"
* tag 'powerpc-5.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Fix possible corruption on big endian due to pgd/pud_present()
Linus Torvalds [Sun, 17 Feb 2019 16:34:10 +0000 (08:34 -0800)]
Merge tag 'csky-for-linus-5.0-rc6' of git://github.com/c-sky/csky-linux
Pull arch/csky fixes from Guo Ren:
"Here are some fixup patches for 5.0-rc6"
* tag 'csky-for-linus-5.0-rc6' of git://github.com/c-sky/csky-linux:
csky: Fixup dead loop in show_stack
csky: Fixup io-range page attribute for mmap("/dev/mem")
csky: coding convention: Use task_stack_page
csky: Fixup wrong pt_regs size
csky: Fixup _PAGE_GLOBAL bit for 610 tlb entry
Linus Torvalds [Sun, 17 Feb 2019 16:32:25 +0000 (08:32 -0800)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two more driver bugfixes"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: bcm2835: Clear current buffer pointers and counts after a transfer
i2c: cadence: Fix the hold bit setting
Linus Torvalds [Sun, 17 Feb 2019 16:30:35 +0000 (08:30 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- tweaks to Elan drivers (both PS/2 and I2C) to support new devices.
Also revert of one of IDs as that device should really be driven by
i2c-hid + hid-multitouch
- a few drivers have been switched to set_brightness_blocking() call
because they either were sleeping the their set_brightness()
implementation or used workqueue but were not canceling it on unbind.
- ps2-gpio and matrix_keypad needed to [properly] flush their works to
avoid potential use-after-free on unbind.
- other miscellaneous fixes.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elan_i2c - add ACPI ID for touchpad in Lenovo V330-15ISK
Input: st-keyscan - fix potential zalloc NULL dereference
Input: apanel - switch to using brightness_set_blocking()
Revert "Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G"
Input: qt2160 - switch to using brightness_set_blocking()
Input: matrix_keypad - use flush_delayed_work()
Input: ps2-gpio - flush TX work when closing port
Input: cap11xx - switch to using set_brightness_blocking()
Input: elantech - enable 3rd button support on Fujitsu CELSIUS H780
Input: bma150 - register input device after setting private data
Input: pwm-vibra - stop regulator after disabling pwm, not before
Input: pwm-vibra - prevent unbalanced regulator
Input: snvs_pwrkey - allow selecting driver for i.MX 7D
Linus Torvalds [Sun, 17 Feb 2019 16:28:49 +0000 (08:28 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"A somewhat bigger ARM update, and the usual smattering of x86 bug
fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: vmx: Fix entry number check for add_atomic_switch_msr()
KVM: x86: Recompute PID.ON when clearing PID.SN
KVM: nVMX: Restore a preemption timer consistency check
x86/kvm/nVMX: read from MSR_IA32_VMX_PROCBASED_CTLS2 only when it is available
KVM: arm64: Forbid kprobing of the VHE world-switch code
KVM: arm64: Relax the restriction on using stage2 PUD huge mapping
arm: KVM: Add missing kvm_stage2_has_pmd() helper
KVM: arm/arm64: vgic: Always initialize the group of private IRQs
arm/arm64: KVM: Don't panic on failure to properly reset system registers
arm/arm64: KVM: Allow a VCPU to fully reset itself
KVM: arm/arm64: Reset the VCPU without preemption and vcpu state loaded
arm64: KVM: Don't generate UNDEF when LORegion feature is present
KVM: arm/arm64: vgic: Make vgic_cpu->ap_list_lock a raw_spinlock
KVM: arm/arm64: vgic: Make vgic_dist->lpi_list_lock a raw_spinlock
KVM: arm/arm64: vgic: Make vgic_irq->irq_lock a raw_spinlock
Dmitry Torokhov [Wed, 6 Feb 2019 18:32:46 +0000 (10:32 -0800)]
Input: apanel - switch to using brightness_set_blocking()
Now that LEDs core allows "blocking" flavor of "set brightness" method we
can use it and get rid of private work item. As a bonus, we are no longer
forgetting to cancel it when we unbind the driver.
Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Unfortunately this is broken on big endian, as the result of the
bitwise & is truncated to int, which is always zero because
_PAGE_PRESENT is 0x8000000000000000ul. This means pgd_present() and
pud_present() are always false at compile time, and the compiler
elides the subsequent code.
Remarkably with that bug present we are still able to boot and run
with few noticeable effects. However under some work loads we are able
to trigger a warning in the ext4 code:
Linus Torvalds [Sun, 17 Feb 2019 01:44:12 +0000 (17:44 -0800)]
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This week is a much smaller update, containing fixes only for TI OMAP,
NXP i.MX and Rockchips platforms:
omap:
- omap4 had problems with lost timer interrupts
- another IRQ handling issue with OMAP5
- A workaround for a regression in the pwm-omap-dmtimer driver
NXP i.MX:
- eMMC was broken on the new imx8mq-evk board
Rockchip:
- a fix for new dtc graph warnings and a regulator fix for rock64
- USB support broke on rk3328-rock64"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: OMAP2+: fix lack of timer interrupts on CPU1 after hotplug
arm64: dts: imx8mq: Fix boot from eMMC
ARM: OMAP2+: Variable "reg" in function omap4_dsi_mux_pads() could be uninitialized
ARM: dts: Configure clock parent for pwm vibra
bus: ti-sysc: Fix timer handling with drop pm_runtime_irq_safe()
arm64: dts: rockchip: enable usb-host regulators at boot on rk3328-rock64
arm64: dts: rockchip: fix graph_port warning on rk3399 bob kevin and excavator
ARM: OMAP5+: Fix inverted nirq pin interrupts with irq_set_type
clocksource: timer-ti-dm: Fix pwm dmtimer usage of fck reparenting
ARM: dts: rockchip: remove qos_cif1 from rk3188 power-domain
Linus Torvalds [Sun, 17 Feb 2019 01:38:01 +0000 (17:38 -0800)]
Merge tag 'nfsd-5.0-2' of git://linux-nfs.org/~bfields/linux
Pull more nfsd fixes from Bruce Fields:
"Two small fixes, one for crashes using nfs/krb5 with older enctypes,
one that could prevent clients from reclaiming state after a kernel
upgrade"
* tag 'nfsd-5.0-2' of git://linux-nfs.org/~bfields/linux:
sunrpc: fix 4 more call sites that were using stack memory with a scatterlist
Revert "nfsd4: return default lease period"
Linus Torvalds [Sun, 17 Feb 2019 01:33:39 +0000 (17:33 -0800)]
Merge tag 'nfs-for-5.0-4' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull more NFS client fixes from Anna Schumaker:
"Three fixes this time.
Nicolas's is for xprtrdma completion vector allocation on single-core
systems. Greg's adds an error check when allocating a debugfs dentry.
And Ben's is an additional fix for nfs_page_async_flush() to prevent
pages from accidentally getting truncated.
Summary:
- Make sure Send CQ is allocated on an existing compvec
- Properly check debugfs dentry before using it
- Don't use page_file_mapping() after removing a page"
* tag 'nfs-for-5.0-4' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Don't use page_file_mapping after removing the page
rpc: properly check debugfs dentry before using it
xprtrdma: Make sure Send CQ is allocated on an existing compvec
Linus Torvalds [Sat, 16 Feb 2019 18:28:05 +0000 (10:28 -0800)]
Merge tag 'compiler-attributes-for-linus-v5.0-rc7' of git://github.com/ojeda/linux
Pull compiler attributes fixes from Miguel Ojeda:
"Clean the new GCC 9 -Wmissing-attributes warnings
The upcoming GCC 9 release extends the -Wmissing-attributes warnings
(enabled by -Wall) to C and aliases: it warns when particular function
attributes are missing in the aliases but not in their target, e.g.:
void __cold f(void) {}
void __alias("f") g(void);
diagnoses:
warning: 'g' specifies less restrictive attribute than
its target 'f': 'cold' [-Wmissing-attributes]
These patch series clean these new warnings. Most of them are caused
by the module_init/exit macros"
Link: https://lore.kernel.org/lkml/20190125104353.2791-1-labbott@redhat.com/
* tag 'compiler-attributes-for-linus-v5.0-rc7' of git://github.com/ojeda/linux:
include/linux/module.h: copy __init/__exit attrs to init/cleanup_module
Compiler Attributes: add support for __copy (gcc >= 9)
lib/crc32.c: mark crc32_le_base/__crc32c_le_base aliases as __pure
Ard Biesheuvel [Fri, 15 Feb 2019 12:33:33 +0000 (13:33 +0100)]
efi/arm: Revert "Defer persistent reservations until after paging_init()"
This reverts commit eff896288872d687d9662000ec9ae11b6d61766f, which
deferred the processing of persistent memory reservations to a point
where the memory may have already been allocated and overwritten,
defeating the purpose.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20190215123333.21209-3-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ard Biesheuvel [Fri, 15 Feb 2019 12:33:32 +0000 (13:33 +0100)]
arm64, mm, efi: Account for GICv3 LPI tables in static memblock reserve table
In the irqchip and EFI code, we have what basically amounts to a quirk
to work around a peculiarity in the GICv3 architecture, which permits
the system memory address of LPI tables to be programmable only once
after a CPU reset. This means kexec kernels must use the same memory
as the first kernel, and thus ensure that this memory has not been
given out for other purposes by the time the ITS init code runs, which
is not very early for secondary CPUs.
On systems with many CPUs, these reservations could overflow the
memblock reservation table, and this was addressed in commit:
eff896288872 ("efi/arm: Defer persistent reservations until after paging_init()")
However, this turns out to have made things worse, since the allocation
of page tables and heap space for the resized memblock reservation table
itself may overwrite the regions we are attempting to reserve, which may
cause all kinds of corruption, also considering that the ITS will still
be poking bits into that memory in response to incoming MSIs.
So instead, let's grow the static memblock reservation table on such
systems so it can accommodate these reservations at an earlier time.
This will permit us to revert the above commit in a subsequent patch.
[ mingo: Minor cleanups. ]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20190215123333.21209-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Fri, 15 Feb 2019 21:36:43 +0000 (13:36 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two fairly small fixes: the qla one is a panic inducing use after free
and the entropy fix may seem minor but it has had huge userspace
impact thanks to an unrelated change in openssl that causes sshd to
refuse logins until it has enough entropy for the session keys, which
causes tens of minutes delay before the affected systems allow logins
after reboot"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix panic from use after free in qla2x00_async_tm_cmd
scsi: sd: fix entropy gathering for most rotational disks
Scott Mayhew [Fri, 15 Feb 2019 18:42:02 +0000 (13:42 -0500)]
sunrpc: fix 4 more call sites that were using stack memory with a scatterlist
While trying to reproduce a reported kernel panic on arm64, I discovered
that AUTH_GSS basically doesn't work at all with older enctypes on arm64
systems with CONFIG_VMAP_STACK enabled. It turns out there still a few
places using stack memory with scatterlists, causing krb5_encrypt() and
krb5_decrypt() to produce incorrect results (or a BUG if CONFIG_DEBUG_SG
is enabled).
Tested with cthon on v4.0/v4.1/v4.2 with krb5/krb5i/krb5p using
des3-cbc-sha1 and arcfour-hmac-md5.
Signed-off-by: Scott Mayhew <smayhew@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Arnd Bergmann [Fri, 15 Feb 2019 19:39:46 +0000 (20:39 +0100)]
Merge tag 'omap-for-v5.0/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fix omap4 and later lost cpu1 interrupts for periodic timer
A fix from Russell that took a while to get applied into fixes as
I thought Russell is merging this one.
* tag 'omap-for-v5.0/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: fix lack of timer interrupts on CPU1 after hotplug
projects / linux.git / log