Thomas Rast [Fri, 12 Mar 2010 17:04:31 +0000 (18:04 +0100)]
notes: implement 'git notes copy --stdin'
This implements a mass-copy command that takes a sequence of lines in
the format
<from-sha1> SP <to-sha1> [ SP <rest> ] LF
on stdin, and copies each <from-sha1>'s notes to the <to-sha1>. The
<rest> is ignored. The intent, of course, is that this can read the
same input that the 'post-rewrite' hook gets.
The copy_note() function is exposed for everyone's and in particular
the next commit's use.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Fri, 12 Mar 2010 17:04:30 +0000 (18:04 +0100)]
rebase -i: invoke post-rewrite hook
Aside from the same issue that rebase also has (remembering the
original commit across a conflict resolution), rebase -i brings an
extra twist: We need to defer writing the rewritten list in the case
of {squash,fixup} because their rewritten result should be the last
commit in the squashed group.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Fri, 12 Mar 2010 17:04:29 +0000 (18:04 +0100)]
rebase: invoke post-rewrite hook
We have to deal with two separate code paths: a normal rebase, which
actually goes through git-am; and rebase {-m|-s}.
The only small issue with both is that they need to remember the
original sha1 across a possible conflict resolution. rebase -m
already puts this information in $dotest/current, and we just
introduce a similar file for git-am.
Note that in git-am, the hook really only runs when coming from
git-rebase: the code path that sets the $dotest/original-commit file
is guarded by a test for $dotest/rebasing.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Fri, 12 Mar 2010 17:04:28 +0000 (18:04 +0100)]
commit --amend: invoke post-rewrite hook
The rough structure of run_rewrite_hook() comes from
run_receive_hook() in receive-pack.
We introduce a --no-post-rewrite option and use it to avoid the hook
when called from git-rebase -i 'edit'. The next patch will add full
support in git-rebase, and we only want to invoke the hook once.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Rast [Fri, 12 Mar 2010 17:04:27 +0000 (18:04 +0100)]
Documentation: document post-rewrite hook
This defines the behaviour of the post-rewrite hook support, which
will be implemented in the following patches.
We deliberately do not document how often the hook will be invoked per
rewriting command, but the interface is designed to keep that at
"once". This would currently not matter too much, since both rebase
and filter-branch are shellscripts and spawn many processes anyway.
However, when a fast sequencer in C is implemented, it will be
beneficial to only have to run the hook once.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johan Herland [Sat, 13 Feb 2010 21:28:38 +0000 (22:28 +0100)]
builtin-notes: Add "copy" subcommand for copying notes between objects
This is useful for keeping notes to objects that are being rewritten by e.g.
'git commit --amend', 'git rebase', or 'git cherry-pick'.
"git notes copy <from> <to>" is in practice equivalent to
"git notes add -C $(git notes list <from>) <to>", although it is somewhat
more convenient for regular users.
"git notes copy" takes the same -f option as "git add", to overwrite existing
notes at the target (instead of aborting with an error message).
If the <from>-object has no notes, "git notes copy" will abort with an error
message.
The patch includes tests verifying correct behaviour of the new subcommand.
Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johan Herland [Sat, 13 Feb 2010 21:28:36 +0000 (22:28 +0100)]
builtin-notes: Add -c/-C options for reusing notes
Inspired by the -c/-C options to "git commit", we teach these options to
"git notes add/append" to allow reuse of note objects.
With this patch in place, it is now easy to copy or move notes between
objects. For example, to copy object A's notes to object B:
git notes add [-f] -C $(git notes list A) B
To move instead of copying, you simply remove the notes from the source
object afterwards, e.g.:
git notes remove A
The patch includes tests verifying correct behaviour of the new functionality.
Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johan Herland [Sat, 13 Feb 2010 21:28:35 +0000 (22:28 +0100)]
builtin-notes: Refactor handling of -F option to allow combining -m and -F
By moving the -F option handling into a separate function (parse_file_arg),
we can start allowing several -F options, and mixed usage of -m and -F
options. Each -m/-F given appends to the note message, in the order they are
given on the command-line.
The patch includes tests verifying correct behaviour of the new functionality.
Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johan Herland [Sat, 13 Feb 2010 21:28:34 +0000 (22:28 +0100)]
builtin-notes: Deprecate the -m/-F options for "git notes edit"
The semantics for "git notes edit -m/-F" overlap with those for
"git notes add -f", and the behaviour (i.e. overwriting existing
notes with the given message/file) is more intuitively captured
by (and better documented with) "git notes add -f".
Suggested-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johan Herland [Sat, 13 Feb 2010 21:28:33 +0000 (22:28 +0100)]
builtin-notes: Add "append" subcommand for appending to note objects
"git notes append" is equivalent to "git notes edit" except that instead
of editing existing notes contents, you can only append to it. This is
useful for quickly adding annotations like e.g.:
git notes append -m "Acked-by: A U Thor <author@example.com>"
"git notes append" takes the same -m/-F options as "git notes add".
If there is no existing note to append to, "git notes append" is identical
to "git notes add" (i.e. it adds a new note).
The patch includes tests verifying correct behaviour of the new subcommand.
Suggested-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johan Herland [Sat, 13 Feb 2010 21:28:32 +0000 (22:28 +0100)]
builtin-notes: Add "add" subcommand for adding notes to objects
"git notes add" is identical to "git notes edit" except that instead of
editing existing notes for a given object, you can only add notes to an
object that currently has none. If "git notes add" finds existing notes
for the given object, the addition is aborted. However, if the new
-f/--force option is used, "git notes add" will _overwrite_ the existing
notes with the new notes contents.
If there is no existing notes for the given object. "git notes add" is
identical to "git notes edit" (i.e. it adds a new note).
The patch includes tests verifying correct behaviour of the new subcommand.
Suggested-by: Joey Hess <joey@kitenet.net> Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johan Herland [Sat, 13 Feb 2010 21:28:30 +0000 (22:28 +0100)]
builtin-notes: Add "list" subcommand for listing note objects
"git notes list" will list all note objects in the current notes ref (in the
format "<note object> <annotated object>"). "git notes list <object>" will
list the note object associated with the given <object>, or fail loudly if
the given <object> has no associated notes.
If no arguments are given to "git notes", it defaults to the "list"
subcommand. This is for pseudo-compatibility with "git tag" and "git branch".
The patch includes tests verifying correct behaviour of the new subcommand.
Suggested-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johan Herland [Sat, 13 Feb 2010 21:28:29 +0000 (22:28 +0100)]
Documentation: Generalize git-notes docs to 'objects' instead of 'commits'
Notes can annotate arbitrary objects (not only commits), but this is not
reflected in the current documentation.
This patch rewrites the git-notes documentation to talk about 'objects'
instead of 'commits'. However, the discussion on commit notes and how
they are displayed by 'git log' is largely preserved.
Finally, I add myself to the Author/Documentation credits, since most of
the lines in the git-notes code and docs are blamed on me.
Cc: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johan Herland [Sat, 13 Feb 2010 21:28:27 +0000 (22:28 +0100)]
Notes API: prune_notes(): Prune notes that belong to non-existing objects
When an object is made unreachable by Git, any notes that annotate that object
are not automagically made unreachable, since all notes are always trivially
reachable from a notes ref. In order to remove notes for non-existing objects,
we therefore need to add functionality for traversing the notes tree and
explicitly removing references to notes that annotate non-reachable objects.
Thus the notes objects themselves also become unreachable, and are removed
by a later garbage collect.
prune_notes() performs this traversal (by using for_each_note() internally),
and removes the notes in question from the notes tree.
Note that the effect of prune_notes() is not persistent unless a subsequent
call to write_notes_tree() is made.
Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johan Herland [Sat, 13 Feb 2010 21:28:23 +0000 (22:28 +0100)]
Teach notes code to properly preserve non-notes in the notes tree
The note tree structure allows for non-note entries to coexist with note
entries in a notes tree. Although we certainly expect there to be very
few non-notes in a notes tree, we should still support them to a certain
degree.
This patch teaches the notes code to preserve non-notes when updating the
notes tree with write_notes_tree(). Non-notes are not affected by fanout
restructuring.
For non-notes to be handled correctly, we can no longer allow subtree
entries that do not match the fanout structure produced by the notes code
itself. This means that fanouts like 4/36, 6/34, 8/32, 4/4/32, etc. are
no longer recognized as note subtrees; only 2-based fanouts are allowed
(2/38, 2/2/36, 2/2/2/34, etc.). Since the notes code has never at any point
_produced_ non-2-based fanouts, it is highly unlikely that this change will
cause problems for anyone.
The patch also adds some tests verifying the correct handling of non-notes
in a notes tree.
Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johan Herland [Sat, 13 Feb 2010 21:28:22 +0000 (22:28 +0100)]
t3305: Verify that adding many notes with git-notes triggers increased fanout
Add a test verifying that the notes code automatically restructures the
notes tree into a deeper fanout level, when many notes are added with
"git notes".
Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johan Herland [Sat, 13 Feb 2010 21:28:20 +0000 (22:28 +0100)]
Builtin-ify git-notes
The builtin-ification includes some minor behavioural changes to the
command-line interface: It is no longer allowed to mix the -m and -F
arguments, and it is not allowed to use multiple -F options.
As part of the builtin-ification, we add the commit_notes() function
to the builtin API. This function (together with the notes.h API) can
be easily used from other builtins to manipulate the notes tree.
Also includes needed changes to t3301.
This patch has been improved by the following contributions:
- Stephen Boyd: Use die() instead of fprintf(stderr, ...) followed by exit(1)
Cc: Stephen Boyd <bebarino@gmail.com> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johan Herland [Sat, 13 Feb 2010 21:28:19 +0000 (22:28 +0100)]
Refactor notes concatenation into a flexible interface for combining notes
When adding a note to an object that already has an existing note, the
current solution is to concatenate the contents of the two notes. However,
the caller may instead wish to _overwrite_ the existing note with the new
note, or maybe even _ignore_ the new note, and keep the existing one. There
might also be other ways of combining notes that are only known to the
caller.
Therefore, instead of unconditionally concatenating notes, we let the caller
specify how to combine notes, by passing in a pointer to a function for
combining notes. The caller may choose to implement its own function for
notes combining, but normally one of the following three conveniently
supplied notes combination functions will be sufficient:
- combine_notes_concatenate() combines the two notes by appending the
contents of the new note to the contents of the existing note.
- combine_notes_overwrite() replaces the existing note with the new note.
- combine_notes_ignore() keeps the existing note, and ignores the new note.
A combine_notes function can be passed to init_notes() to choose a default
combine_notes function for that notes tree. If NULL is given, the notes tree
falls back to combine_notes_concatenate() as the ultimate default.
A combine_notes function can also be passed directly to add_note(), to
control the notes combining behaviour for a note addition in particular.
If NULL is passed, the combine_notes function registered for the given
notes tree is used.
Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johan Herland [Sat, 13 Feb 2010 21:28:18 +0000 (22:28 +0100)]
Notes API: Allow multiple concurrent notes trees with new struct notes_tree
The new struct notes_tree encapsulates access to a specific notes tree.
It is provided to allow callers to make use of several different notes trees
simultaneously.
A struct notes_tree * parameter is added to every function in the notes API.
In all cases, NULL can be passed, in which case the fallback "default" notes
tree (default_notes_tree) is used.
Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johan Herland [Sat, 13 Feb 2010 21:28:17 +0000 (22:28 +0100)]
Notes API: write_notes_tree(): Store the notes tree in the database
Uses for_each_note() to traverse the notes tree, and produces tree
objects on the fly representing the "on-disk" version of the notes
tree with appropriate fanout.
Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johan Herland [Sat, 13 Feb 2010 21:28:12 +0000 (22:28 +0100)]
Notes API: init_notes(): Initialize the notes tree from the given notes ref
Created by a simple refactoring of initialize_notes().
Also add a new 'flags' parameter, which is a bitwise combination of notes
initialization flags. For now, there is only one flag - NOTES_INIT_EMPTY -
which indicates that the notes tree should not auto-load the contents of
the given (or default) notes ref, but rather should leave the notes tree
initialized to an empty state. This will become useful in the future when
manipulating the notes tree through the notes API.
Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johan Herland [Sat, 13 Feb 2010 21:28:10 +0000 (22:28 +0100)]
Notes API: get_commit_notes() -> format_note() + remove the commit restriction
There is really no reason why only commit objects can be annotated. By
changing the struct commit parameter to get_commit_notes() into a sha1 we
gain the ability to annotate any object type. To reflect this in the function
naming as well, we rename get_commit_notes() to format_note().
This patch also fixes comments and variable names throughout notes.c as a
consequence of the removal of the unnecessary 'commit' restriction.
Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make difftool.prompt fall back to mergetool.prompt
The documentation states that "git-difftool falls back to git-mergetool
config variables when the difftool equivalents have not been defined".
Until now, this was not the case for "difftool.prompt".
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com> Acked-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ramsay Jones [Fri, 22 Jan 2010 20:00:47 +0000 (20:00 +0000)]
engine.pl: Fix a recent breakage of the buildsystem generator
Commit ade2ca0c (Do not try to remove directories when removing
old links, 2009-10-27) added an expression to a 'test' using an
'-o' or connective. This resulted in the buildsystem generator
mistaking a conditional 'rm' for a linker command. In order to
fix the breakage, we filter out all 'test' commands before then
attempting to identify the commands of interest.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Acked-by: Sebastian Schuberth <sschuberth@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 22 Jan 2010 22:17:06 +0000 (14:17 -0800)]
git-mv: fix moving more than one source to a single destination
The code used as if return value from basename(3) were stable, but
often the function is implemented to return a pointer to a static
storage internal to it.
Because basename(3) is also allowed to modify its input parameter in
place, casting constness away from the strings we obtained from the
caller and giving them to basename is a no-no.
Reported, and initial fix and test supplied by David Rydh.
Thomas Rast [Fri, 22 Jan 2010 00:21:38 +0000 (01:21 +0100)]
Documentation: improve description of --glob=pattern and friends
Consolidate the descriptions of --branches, --tags and --remotes a
bit, to make it less repetitive. Improve the grammar a bit, and spell
out the meaning of the 'append /*' rule.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus Torvalds [Thu, 21 Jan 2010 19:37:38 +0000 (11:37 -0800)]
Remove diff machinery dependency from read-cache
Exal Sibeaz pointed out that some git files are way too big, and that
add_files_to_cache() brings in all the diff machinery to any git binary
that needs the basic git SHA1 object operations from read-cache.c. Which
is pretty much all of them.
It's doubly silly, since add_files_to_cache() is only used by builtin
programs (add, checkout and commit), so it's fairly easily fixed by just
moving the thing to builtin-add.c, and avoiding the dependency entirely.
I initially argued to Exal that it would probably be best to try to depend
on smart compilers and linkers, but after spending some time trying to
make -ffunction-sections work and giving up, I think Exal was right, and
the fix is to just do some trivial cleanups like this.
This trivial cleanup results in pretty stunning file size differences.
The diff machinery really is mostly used by just the builtin programs, and
you have things like these trivial before-and-after numbers:
(Of course, stripping all the binaries brings the 33MB down to 9MB, so the
whole debug information thing is still the bulk of it all, but that's a
separate issue entirely)
Now, I'm sure there are other things we should do, and changing our
compiler flags from -O2 to -Os would bring the text size down by an
additional almost 20%, but this thing Exal pointed out seems to be some
good low-hanging fruit.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 22 Jan 2010 00:38:56 +0000 (16:38 -0800)]
merge-recursive: do not return NULL only to cause segfault
merge-recursive calls write_tree_from_memory() to come up with a virtual
tree, with possible conflict markers inside the blob contents, while
merging multiple common ancestors down. It is a bug to call the function
with unmerged entries in the index, even if the merge to come up with the
common ancestor resulted in conflicts. Otherwise the result won't be
expressible as a tree object.
We _might_ want to suggest the user to set GIT_MERGE_VERBOSITY to 5 and
re-run the merge in the message. At least we will know which part of
process_renames() or process_entry() functions is not correctly handling
the unmerged paths, and it might help us diagnosing the issue.
Tay Ray Chuan [Thu, 21 Jan 2010 14:41:00 +0000 (22:41 +0800)]
retry request without query when info/refs?query fails
When "info/refs" is a static file and not behind a CGI handler, some
servers may not handle a GET request for it with a query string
appended (eg. "?foo=bar") properly.
If such a request fails, retry it sans the query string. In addition,
ensure that the "smart" http protocol is not used (a service has to be
specified with "?service=<service name>" to be conformant).
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Reported-and-tested-by: Yaroslav Halchenko <debian@onerussian.com> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 21 Jan 2010 04:28:51 +0000 (20:28 -0800)]
Merge branch 'jc/conflict-marker-size'
* jc/conflict-marker-size:
rerere: honor conflict-marker-size attribute
rerere: prepare for customizable conflict marker length
conflict-marker-size: new attribute
rerere: use ll_merge() instead of using xdl_merge()
merge-tree: use ll_merge() not xdl_merge()
xdl_merge(): allow passing down marker_size in xmparam_t
xdl_merge(): introduce xmparam_t for merge specific parameters
git_attr(): fix function signature
Junio C Hamano [Thu, 21 Jan 2010 04:28:50 +0000 (20:28 -0800)]
Merge branch 'ap/merge-backend-opts'
* ap/merge-backend-opts:
Document that merge strategies can now take their own options
Extend merge-subtree tests to test -Xsubtree=dir.
Make "subtree" part more orthogonal to the rest of merge-recursive.
pull: Fix parsing of -X<option>
Teach git-pull to pass -X<option> to git-merge
git merge -X<option>
git-merge-file --ours, --theirs
Junio C Hamano [Thu, 21 Jan 2010 04:28:49 +0000 (20:28 -0800)]
Merge remote branch 'remotes/trast-doc/for-next'
* remotes/trast-doc/for-next:
Documentation: spell 'git cmd' without dash throughout
Documentation: format full commands in typewriter font
Documentation: warn prominently against merging with dirty trees
Documentation/git-merge: reword references to "remote" and "pull"
Junio C Hamano [Thu, 21 Jan 2010 04:28:49 +0000 (20:28 -0800)]
Merge branch 'jh/notes' (early part)
* 'jh/notes' (early part):
Add more testcases to test fast-import of notes
Rename t9301 to t9350, to make room for more fast-import tests
fast-import: Proper notes tree manipulation
Fix memory corruption when .gitignore does not end by \n
Commit b5041c5 (Avoid writing to buffer in add_excludes_from_file_1())
tried not to append '\n' at the end because the next commit
may return a buffer that does not have extra space for that.
Unfortunately it left this assignment in the loop:
buf[i - (i && buf[i-1] == '\r')] = 0;
that can corrupt memory if "buf" is not '\n' terminated. But even if
it does not corrupt memory, the last line would not be
NULL-terminated, leading to errors later inside add_exclude().
This patch fixes it by reverting the faulty commit and make
sure "buf" is always \n terminated.
While at it, free unused memory properly.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 20 Jan 2010 21:59:36 +0000 (13:59 -0800)]
Fix "log" family not to be too agressive about showing notes
Giving "Notes" information in the default output format of "log" and
"show" is a sensible progress (the user has asked for it by having the
notes), but for some commands (e.g. "format-patch") spewing notes into the
formatted commit log message without being asked is too aggressive.
Enable notes output only for "log", "show", "whatchanged" by default and
only when the user didn't ask any specific --pretty/--format from the
command line; users can explicitly override this default with --show-notes
and --no-notes option.
Parts of tests are taken from Jeff King's fix.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 20 Jan 2010 22:44:31 +0000 (14:44 -0800)]
Merge branch 'jc/cache-unmerge'
* jc/cache-unmerge:
rerere forget path: forget recorded resolution
rerere: refactor rerere logic to make it independent from I/O
rerere: remove silly 1024-byte line limit
resolve-undo: teach "update-index --unresolve" to use resolve-undo info
resolve-undo: "checkout -m path" uses resolve-undo information
resolve-undo: allow plumbing to clear the information
resolve-undo: basic tests
resolve-undo: record resolved conflicts in a new index extension section
builtin-merge.c: use standard active_cache macros
Junio C Hamano [Wed, 20 Jan 2010 22:44:12 +0000 (14:44 -0800)]
Merge branch 'js/exec-error-report'
* js/exec-error-report:
Improve error message when a transport helper was not found
start_command: detect execvp failures early
run-command: move wait_or_whine earlier
start_command: report child process setup errors to the parent's stderr
Junio C Hamano [Wed, 20 Jan 2010 22:43:54 +0000 (14:43 -0800)]
Merge branch 'jc/ls-files-ignored-pathspec'
* jc/ls-files-ignored-pathspec:
ls-files: fix overeager pathspec optimization
read_directory(): further split treat_path()
read_directory_recursive(): refactor handling of a single path into a separate function
t3001: test ls-files -o ignored/dir
Junio C Hamano [Wed, 20 Jan 2010 22:43:41 +0000 (14:43 -0800)]
Merge branch 'jc/grep-lookahead'
* jc/grep-lookahead:
grep --no-index: allow use of "git grep" outside a git repository
grep: prepare to run outside of a work tree
grep: rip out pessimization to use fixmatch()
grep: rip out support for external grep
grep: optimize built-in grep by skipping lines that do not hit
Junio C Hamano [Wed, 20 Jan 2010 22:42:20 +0000 (14:42 -0800)]
Merge branch 'da/difftool'
* da/difftool:
difftool: Update copyright notices to list each year separately
difftool: Use eval to expand '--extcmd' expressions
difftool: Add '-x' and as an alias for '--extcmd'
t7800-difftool.sh: Simplify the --extcmd test
git-diff.txt: Link to git-difftool
difftool: Allow specifying unconfigured commands with --extcmd
difftool--helper: Remove use of the GIT_MERGE_TOOL variable
difftool--helper: Update copyright and remove distracting comments
git-difftool: Add '--gui' for selecting a GUI tool
t7800-difftool: Set a bogus tool for use by tests
Junio C Hamano [Wed, 20 Jan 2010 22:42:07 +0000 (14:42 -0800)]
Merge branch 'mh/rebase-fixup'
* mh/rebase-fixup:
rebase -i: Retain user-edited commit messages after squash/fixup conflicts
t3404: Set up more of the test repo in the "setup" step
rebase -i: For fixup commands without squashes, do not start editor
rebase -i: Change function make_squash_message into update_squash_message
rebase -i: Extract function do_with_author
rebase -i: Handle the author script all in one place in do_next
rebase -i: Extract a function "commit_message"
rebase -i: Simplify commit counting for generated commit messages
rebase -i: Improve consistency of commit count in generated commit messages
t3404: Test the commit count in commit messages generated by "rebase -i"
rebase -i: Introduce a constant AMEND
rebase -i: Introduce a constant AUTHOR_SCRIPT
rebase -i: Document how temporary files are used
rebase -i: Use symbolic constant $MSG consistently
rebase -i: Use "test -n" instead of "test ! -z"
rebase -i: Inline expression
rebase -i: Remove dead code
rebase -i: Make the condition for an "if" more transparent
Junio C Hamano [Wed, 20 Jan 2010 22:41:48 +0000 (14:41 -0800)]
Merge branch 'mh/rebase-fixup' (early part)
* 'mh/rebase-fixup' (early part):
rebase-i: Ignore comments and blank lines in peek_next_command
lib-rebase: Allow comments and blank lines to be added to the rebase script
lib-rebase: Provide clearer debugging info about what the editor did
Add a command "fixup" to rebase --interactive
t3404: Use test_commit to set up test repository
* jk/warn-author-committer-after-commit:
user_ident_sufficiently_given(): refactor the logic to be usable from elsewhere
commit.c::print_summary: do not release the format string too early
commit: allow suppression of implicit identity advice
commit: show interesting ident information in summary
strbuf: add strbuf_addbuf_percentquote
strbuf_expand: convert "%%" to "%"
Junio C Hamano [Wed, 20 Jan 2010 22:39:52 +0000 (14:39 -0800)]
Merge branch 'jc/ident'
* jc/ident:
ident.c: replace fprintf with fputs to suppress compiler warning
user_ident_sufficiently_given(): refactor the logic to be usable from elsewhere
ident.c: treat $EMAIL as giving user.email identity explicitly
ident.c: check explicit identity for name and email separately
ident.c: remove unused variables
Junio C Hamano [Wed, 20 Jan 2010 22:39:48 +0000 (14:39 -0800)]
Merge branch 'tr/http-push-ref-status'
* tr/http-push-ref-status:
transport-helper.c::push_refs(): emit "no refs" error message
transport-helper.c::push_refs(): ignore helper-reported status if ref is not to be pushed
transport.c::transport_push(): make ref status affect return value
refactor ref status logic for pushing
t5541-http-push.sh: add test for unmatched, non-fast-forwarded refs
t5541-http-push.sh: add tests for non-fast-forward pushes
Junio C Hamano [Wed, 20 Jan 2010 22:37:25 +0000 (14:37 -0800)]
Merge branch 'jc/symbol-static'
* jc/symbol-static:
date.c: mark file-local function static
Replace parse_blob() with an explanatory comment
symlinks.c: remove unused functions
object.c: remove unused functions
strbuf.c: remove unused function
sha1_file.c: remove unused function
mailmap.c: remove unused function
utf8.c: mark file-local function static
submodule.c: mark file-local function static
quote.c: mark file-local function static
remote-curl.c: mark file-local function static
read-cache.c: mark file-local functions static
parse-options.c: mark file-local function static
entry.c: mark file-local function static
http.c: mark file-local functions static
pretty.c: mark file-local function static
builtin-rev-list.c: mark file-local function static
bisect.c: mark file-local function static