Jason Gerecke [Wed, 19 Apr 2017 21:47:24 +0000 (14:47 -0700)]
HID: wacom: Override incorrect logical maximum contact identifier
It apears that devices designed around Wacom's G11 chipset (e.g. Lenovo
ThinkPad Yoga 260, Lenovo ThinkPad X1 Yoga, Dell XPS 12 9250, Dell Venue
8 Pro 5855, etc.) suffer from a common issue in their HID descriptors.
The logical maximum is not updated for the "Contact Identifier" usage,
leaving it as just "1" despite these devices being capable of tracking
far more touches.
Commit 60a221869803 began ignoring usages with out-of-range values,
causing problems for devices based on this chipset. Touches after
the first will have an out-of-range Contact Identifier, and ignoring
that usage will cause the kernel to incorrectly slot each finger's
events (along with all the knock-on userspace effects that entails).
This commit checks for these buggy descriptors and updates the maximum
where required. Prior chipsets have used "255" as the maximum (and the
G11, at least, doesn't seem to actually use IDs outside the range of
1..CONTACTMAX) so continue using this value.
Cc: stable@vger.kernel.org Fixes: 60a221869803 ("HID: wacom: generic: add support for touchring") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jason Gerecke [Thu, 13 Apr 2017 15:39:49 +0000 (08:39 -0700)]
HID: wacom: Treat HID_DG_TOOLSERIALNUMBER as unsigned
Because HID_DG_TOOLSERIALNUMBER doesn't first cast the value recieved from HID
to an unsigned type, sign-extension rules can cause the value of
wacom_wac->serial[0] to inadvertently wind up with all 32 of its highest bits
set if the highest bit of "value" was set.
This can cause problems for Tablet PC devices which use AES sensors and the
xf86-input-wacom userspace driver. It is not uncommon for AES sensors to send a
serial number of '0' while the pen is entering or leaving proximity. The
xf86-input-wacom driver ignores events with a serial number of '0' since it
cannot match them up to an in-use tool. To ensure the xf86-input-wacom driver
does not ignore the final out-of-proximity event, the kernel does not send
MSC_SERIAL events when the value of wacom_wac->serial[0] is '0'. If the highest
bit of HID_DG_TOOLSERIALNUMBER is set by an in-prox pen which later leaves
proximity and sends a '0' for HID_DG_TOOLSERIALNUMBER, then only the lowest 32
bits of wacom_wac->serial[0] are actually cleared, causing the kernel to send
an MSC_SERIAL event. Since the 'input_event' function takes an 'int' as
argument, only those lowest (now-cleared) 32 bits of wacom_wac->serial[0] are
sent to userspace, causing xf86-input-wacom to ignore the event. If the event
was the final out-of-prox event, then xf86-input-wacom may remain in a state
where it believes the pen is in proximity and refuses to allow other devices
under its control (e.g. the touchscreen) to move the cursor.
It should be noted that EMR devices and devices which use both the
HID_DG_TOOLSERIALNUMBER and WACOM_HID_WD_SERIALHI usages (in that order) would
be immune to this issue. It appears only AES devices are affected.
Fixes: f85c9dc678a ("HID: wacom: generic: Support tool ID and additional tool types") Cc: stable@vger.kernel.org Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jason Gerecke [Fri, 31 Mar 2017 17:02:05 +0000 (10:02 -0700)]
HID: wacom: Move wacom_remote_irq and wacom_remote_status_irq
These two functions awkwardly break up the otherwise-contiguous chunk of
related Intuos IRQ functions with a 500 line tangent about the operation
of the EKR. Their presence makes it difficult to read/navigate through the
the Intuos code. Since there is no dependency between these functions, it
is possible to simply move them down somewhat. This commit moves them
to be after the final Intuos IRQ function.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID: wacom: generic: sync pad events only for actual packets
Commits d793ff8 and 4082da8 introduced two pad usages which do not
actually send pad input events. To make sure we do not post empty
pad packets, pad_input_event_flag is introduced. Turn on the flag
for real pad input events so we can synchronize them properly.
HID: logitech-hidpp: battery: provide CAPACITY_LEVEL
CAPACITY LEVEL allows to forward rough information on the battery mileage.
HID++ 2.0 devices will either report percentage or levels, so better
forwarding this information to the user space.
The M325 supports only 2 levels: 'Full' and 'Critical'. With mileage,
it will report either 90% or 5%, which might confuse users. With this
change the battery will either report "Full" or "Critical".
HID: logitech-hidpp: rename battery level into capacity
The power_supply term for the percentage is capacity. Capacity level
can be given when non accurate mileage is provided by the device, so
better stick to the terms used in power_supply.
When a device reconnects, there is a high chance its power supply has
been changed (for a battery replacement for instance). Just forward
the battery state here.
HID: logitech-hidpp: forward device info in power_supply
Better forwarding the device name, manufacturer and serial to upower.
Note that serial is still empty, it will be filled in a later patch
in this series.
HID: logitech-hidpp: rework probe path for unifying devices
Unifying devices are different from others because they can probed
while not connected. So we need to talk to the receiver to get some
extra information like the device name and the serial.
Instead of having conditionals while attempting to read the device name
from HID++ 2.0, have a special init path for them.
HID: logitech-dj: allow devices to request full pairing information
Register 0xB5 should be handled specially no matter what function is
used. This allows to retrieve the serial and the Quad ID from
hid-logitech-hidpp directly.
Commit 3b164a00a9fc ("HID: wacom: Cleanup unsupported device_type
for BAMBOO_PT") cleaned up Bamboo devices which our driver falsely
claimed had touch. Bamboo One Medium also does not have touch.
HID: wacom: call _query_tablet_data() for BAMBOO_TOUCH
Commit a544c619a54b ("HID: wacom: do not attempt to switch mode
while in probe") introduces delayed work for querying (setting the
mode) on all tablets. Bamboo Touch (056a:00d0) has a ghost
interface which claims to be a pen device. Though this device can
be removed, we have to set the mode on the ghost pen interface
before we remove it. After the aforementioned delay was introduced
the device was being removed before the mode setting could be
executed.
HID: wacom: Don't add ghost interface as shared data
A previous commit (below) adds a check for already probed interfaces to
Wacom's matching heuristic. Unfortunately this causes the Bamboo Pen
(CTL-460) to match itself to its 'ghost' touch interface. After
subsequent changes to the driver this match to the ghost causes the
kernel to crash. This patch avoids calling wacom_add_shared_data()
for the BAMBOO_PEN's ghost touch interface.
Fixes: 41372d5d40e7 ("HID: wacom: Augment 'oVid' and 'oPid' with heuristics for HID_GENERIC") Cc: stable <stable@vger.kernel.org> # 4.9 Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Peter Stein [Fri, 17 Feb 2017 08:00:50 +0000 (00:00 -0800)]
HID: xinmo: fix for out of range for THT 2P arcade controller.
There is a new clone of the XIN MO arcade controller which has same issue with
out of range like the original. This fix will solve the issue where 2
directions on the joystick are not recognized by the new THT 2P arcade
controller with device ID 0x75e1. In details the new device ID is added the
hid-id list and the hid-xinmo source code.
Signed-off-by: Peter Stein <peter@stuntstein.dk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jaejoong Kim [Fri, 3 Mar 2017 08:54:01 +0000 (17:54 +0900)]
HID: hiddev: reallocate hiddev's minor number
We need to store the minor number each drivers. In case of hidraw, the
minor number is stored stores in struct hidraw. But hiddev's minor is
located in struct hid_device.
The hid-core driver announces a kernel message which driver is loaded when
HID device connected, but hiddev's minor number is always zero. To proper
display hiddev's minor number, we need to store the minor number asked from
usb core and do some refactoring work (move from hiddev.c to hiddev.h) to
access hiddev in hid-core.
[jkosina@suse.cz: rebase on top of newer codebase] Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Martyn Welch [Tue, 14 Feb 2017 14:17:56 +0000 (14:17 +0000)]
HID: Accutouch: Add driver for ELO Accutouch 2216 USB Touchscreens
The Accutouch 2216 is reporting BTN_LEFT/BTN_MOUSE rather than BTM_TOUCH
in it's capabilities, which is what user space expects a touchscreen
device to report. This is causing udev to consider the device to be a
"VMware's USB mouse" rather than as a touchscreen, which results in a
mouse cursor being displayed in Weston.
This patch adds a special driver for the device to correct the
capabilities reported.
It looks like a bunch of devices do not like to be polled
for their reports at init time. When you look into the details,
it seems that for those that are requiring the quirk
HID_QUIRK_NO_INIT_REPORTS, the driver fails to retrieve part
of the features/inputs while others (more generic) work.
IMO, it should be acceptable to remove the need for the quirk
in the general case. On the small amount of cases where
we actually need to read the current values, the driver
in charge (hid-mt or wacom) already retrieves the features
manually.
There are 2 cases where we might need to retrieve the reports at
init:
1. hiddev devices with specific use-space tool
2. a device that would require the driver to fetch a specific
feature/input at plug
For case 2, I have seen this a few time on hid-multitouch. It
is solved in hid-multitouch directly by fetching the feature.
I hope it won't be too common and this can be solved on a per-case
basis (crossing fingers).
For case 1, we moved the implementation of HID_QUIRK_NO_INIT_REPORTS
in hiddev. When somebody starts calling ioctls that needs an initial
update, the hiddev device will fetch the initial state of the reports
to mimic the current behavior. This adds a small amount of time during
the first HIDIOCGUSAGE(S), but it should be acceptable in
most cases. To keep the currently known broken devices, we have to
keep around HID_QUIRK_NO_INIT_REPORTS, but the scope will only be
for hiddev.
Note that I don't think hidraw would be affected and I checked that
the FF drivers that need to interact with the report fields are all
using output reports, which are not initialized by
usbhid_init_reports().
NO_INIT_INPUT_REPORTS is then replaced by HID_QUIRK_NO_INIT_REPORTS:
there is no point keeping it for just one device.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID: clamp input to logical range if no null state
This patch fixes an issue in drivers/hid/hid-input.c where values
outside of the logical range are not clamped when "null state" bit of
the input control is not set.
This was discussed on the lists [1] and this change stems from the fact
due to the ambiguity of the HID specification it might be appropriate to
follow Microsoft's own interpretation of the specification. As noted in
Microsoft's documentation [2] in the section titled "Required HID usages
for digitizers" it is noted that values reported outside the logical
range "will be considered as invalid data and the value will be changed
to the nearest boundary value (logical min/max)."
This patch fixes an issue where the (1292:4745) Innomedia INNEX
GENESIS/ATARI reports out of range values for its X and Y axis of the
DPad which, due to the null state bit being unset, are forwarded to
userspace as is. Now these values will get clamped to the logical range
before being forwarded to userspace. This device was also used to test
this patch.
This patch expands on commit 3f3752705dbd ("HID: reject input outside
logical range only if null state is set").
Ping Cheng [Wed, 15 Mar 2017 00:08:16 +0000 (17:08 -0700)]
HID: wacom: generic: Wacom mouse is only provided for opaque tablets
Commit f85c9dc ("Support tool ID and additional tool types") introduced mouse
and lens cursor tools to generic codepath, which covers both display (direct)
and opaque tablets (indirect devices). However, mouse and lens cursor tools are
only provided for opaque tablets. This patch ignores mouse and lens cursor tools
if the device is a display tablet.
Oscar Campos [Mon, 6 Mar 2017 21:02:39 +0000 (21:02 +0000)]
HID: corsair: Add driver Scimitar Pro RGB gaming mouse 1b1c:1b3e support to hid-corsair
This mouse sold by Corsair as Scimitar PRO RGB defines two consecutive
Logical Minimum items in its Application (Consumer.0001) report making
it non parseable. This patch fixes the report descriptor overriding
byte 77 in rdesc from 0x16 (Logical Minimum with 16 bits value) to 0x26
(Logical Maximum with 16 bits value).
Signed-off-by: Oscar Campos <oscar.campos@member.fsf.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID: wacom: don't manually release resources for the EKR
Commit 5b779fc introduces the manual release of resources in wacom_remove() as
an addition to the driver's use of devm. The EKR resources can only be
released through wacom_remote_destroy_one() so we skip the manual release for
it.
Fixes: 5b779fc ("HID: wacom: release the resources before leaving despite devm") Signed-off-by: Aaron Armstrong Skomra <skomra@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HungNien Chen [Mon, 6 Mar 2017 03:30:14 +0000 (11:30 +0800)]
HID: multitouch: change for touch height/width
Quoting from Jonathan Clarke in previous thread(2017/01/24):
"This division by 2 was added along with the touch width/height fields 6 years
ago so that those fields 'match the visual scale of the touch' for a specific
device (3M PCT)" "The scaling is also discarding information about touch size
(1 bit for each of width/height) which is useful for any application that wants
to know about it."
Jonathan mentioned just what I thought in a new project recently. It dosen't
make sense to discard 1 bit width/height in general case according to the spec
in multi-touch-protocol.txt so I would like to make a slight change here.
A quirk MT_QUIRK_TOUCH_SIZE_SCALING was added to service devices like 3M PCT
with a special visual scale and the division by 2 only take effect with devices
like that.
HID: sony: Fix input device leak when connecting a DS4 twice using USB/BT
When a user connects a DS4 twice using USB and BT, we reject the
second device connection after the setup work. We then perform
a cleanup, but during cleanup we are not removing the touchpad
device. This leads to leakage of an input device, which we would
never remove. It can likely result into a kernel oops as well
when the touchpad evdev node is accessed and the underlaying HID
device has been removed from the system.
[jkosina@suse.cz: added stable annotation] Fixes: ac797b95f532 ("HID: sony: Make the DS4 touchpad a separate device") Cc: stable@vger.kernel.org Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Daniel Drake [Fri, 17 Feb 2017 13:40:52 +0000 (07:40 -0600)]
HID: chicony: Add support for another ASUS Zen AiO keyboard
Add support for media keys on the keyboard that comes with the
Asus V221ID and ZN241IC All In One computers.
The keys to support here are WLAN, BRIGHTNESSDOWN and BRIGHTNESSUP.
This device is not visibly branded as Chicony, and the USB Vendor ID
suggests that it is a JESS device. However this seems like the right place
to put it: the usage codes are identical to the currently supported
devices, and this driver already supports the ASUS AIO keyboard AK1D.
Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Tobias Jakobi [Sat, 25 Feb 2017 19:27:27 +0000 (20:27 +0100)]
HID: usbhid: extend polling interval configuration to joysticks
For mouse devices we can currently change the polling interval
via usbhid.mousepoll. Implement the same thing for joysticks, so
users can reduce input latency this way.
This has been tested with a Logitech RumblePad 2 with jspoll=2,
resulting in a polling rate of 500Hz (verified with evhz).
According to error handling in this function, it is likely that some
resources should be freed before returning.
Replace 'return ret', with 'goto err'.
While at it, remove some spaces at the beginning of the lines to be more
consistent.
Fixes: ead0687fe304a ("HID: i2c-hid: support regulator power on/off") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Ping Cheng [Wed, 15 Feb 2017 05:27:45 +0000 (21:27 -0800)]
HID: wacom: generic: support touch on/off softkey
Wacom Cintiq Pro has a softkey to turn touch on/off. Since it is
a softkey, hardware/firmware still reports touch events no matter
what state the softkey is. We need to ignore touch events when
the key is in off mode.
Wacom Cintiq Pro added a touch key to switch the tablet between
display and opaque mode. This patch informs the change by removing
the old devices and creating new ones with proper properties.
Ping Cheng [Wed, 15 Feb 2017 05:26:21 +0000 (21:26 -0800)]
HID: wacom: generic: add 3 tablet touch keys
This patch add support to the 3 touch keys on Wacom Cintiq Pro. These touch
keys are in the middle of the other two keys on the top edge of the tablet.
HID: usbhid: add quirk for innomedia INNEX GENESIS/ATARI adapter
The (1292:4745) Innomedia INNEX GENESIS/ATARI adapter needs
HID_QUIRK_MULTI_INPUT to split the device up into two controllers
instead of inputs from both being merged into one.
Signed-off-by: Tomasz Kramkowski <tk@the-tk.com> Acked-By: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID: reject input outside logical range only if null state is set
This patch fixes an issue in drivers/hid/hid-input.c where USB HID
control null state flag is not checked upon rejecting inputs outside
logical minimum-maximum range. The check should be made according to USB
HID specification 1.11, section 6.2.2.5, p.31. The fix will resolve
issues with some game controllers, such as:
https://bugzilla.kernel.org/show_bug.cgi?id=68621
[tk@the-tk.com: shortened and fixed spelling in commit message] Signed-off-by: Valtteri Heikkilä <rnd@nic.fi> Signed-off-by: Tomasz Kramkowski <tk@the-tk.com> Acked-By: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Brian Norris [Fri, 10 Feb 2017 02:03:57 +0000 (18:03 -0800)]
HID: i2c-hid: support regulator power on/off
On some boards, we need to enable a regulator before using the HID, and
it's also nice to save power in suspend by disabling it. Support an
optional "vdd-supply" and a companion initialization delay.
Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: linux-input@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jonathan Tomer [Wed, 1 Feb 2017 19:54:57 +0000 (11:54 -0800)]
HID: Add quirk driver for NTI USB-SUN adapter
These adapters allow pre-USB Sun keyboards to be connected to USB-only
machines, but include the wrong maximum keycode in their report descriptor,
making most of the keys present on Sun keyboards but not 101-key PC
keyboards nonfunctional.
This patch implements a quirk that overrides the maximum keycode in the
report descriptor.
Signed-off-by: Jonathan Tomer <jktomer@google.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Linus Torvalds [Wed, 22 Feb 2017 01:21:32 +0000 (17:21 -0800)]
Merge branch 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo:
- Bartlomiej added pata_falcon
- Christoph is trying to remove use of static 4k buf. It's still WIP
- config cleanup around HAS_DMA
- other fixes and driver-specific changes
* 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (29 commits)
ata: pata_of_platform: using of_property_read_u32() helper
pata_atiixp: Don't use unconnected secondary port on SB600/SB700
libata-sff: Don't scan disabled ports when checking for legacy mode.
pata_octeon_cf: remove unused local variables from octeon_cf_set_piomode()
ahci: qoriq: added ls2088a platforms support
ahci: qoriq: report error when ecc register address is missing in dts
ahci: qoriq: added a condition to enable dma coherence
Revert "libata: switch to dynamic allocation instead of ata_scsi_rbuf"
ahci: imx: fix building without hwmon or thermal
ata: add Atari Falcon PATA controller driver
ata: pass queued command to ->sff_data_xfer method
ata: allow subsystem to be used on m68k arch
libata: switch to dynamic allocation instead of ata_scsi_rbuf
libata: don't call ata_scsi_rbuf_fill for command without a response buffer
libata: call ->scsi_done from ata_scsi_simulate
libata: remove the done callback from ata_scsi_args
libata: move struct ata_scsi_args to libata-scsi.c
libata: avoid global response buffer in atapi_qc_complete
libata-eh: Use switch() instead of sparse array for protocol strings
ata: sata_mv: Convert to devm_ioremap_resource()
...
Linus Torvalds [Wed, 22 Feb 2017 01:06:22 +0000 (17:06 -0800)]
Merge tag 'dmaengine-4.11-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
"This time we fairly boring and bit small update.
- Support for Intel iDMA 32-bit hardware
- deprecate broken support for channel switching in async_tx
- bunch of updates on stm32-dma
- Cyclic support for zx dma and making in generic zx dma driver
- Small updates to bunch of other drivers"
* tag 'dmaengine-4.11-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (29 commits)
async_tx: deprecate broken support for channel switching
dmaengine: rcar-dmac: Widen DMA mask to 40 bits
dmaengine: sun6i: allow build on ARM64 platforms (sun50i)
dmaengine: Provide a wrapper for memcpy operations
dmaengine: zx: fix build warning
dmaengine: dw: we do support Merrifield SoC in PCI mode
dmaengine: dw: add support of iDMA 32-bit hardware
dmaengine: dw: introduce register mappings for iDMA 32-bit
dmaengine: dw: introduce block2bytes() and bytes2block()
dmaengine: dw: extract dwc_chan_pause() for future use
dmaengine: dw: replace convert_burst() with one liner
dmaengine: dw: register IRQ and DMA pool with instance ID
dmaengine: dw: Fix data corruption in large device to memory transfers
dmaengine: ste_dma40: indicate granularity on channels
dmaengine: ste_dma40: indicate directions on channels
dmaengine: stm32-dma: Add error messages if xlate fails
dmaengine: dw: pci: remove LPE Audio DMA ID
dmaengine: stm32-dma: Add max_burst support
dmaengine: stm32-dma: Add synchronization support
dmaengine: stm32-dma: Fix residue computation issue in cyclic mode
...
Linus Torvalds [Wed, 22 Feb 2017 00:58:32 +0000 (16:58 -0800)]
Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new drivers:
- i.MX6 Video Data Order Adapter's (VDOA)
- Toshiba et8ek8 5MP sensor
- STM DELTA multi-format video decoder V4L2 driver
- SPI connected IR LED
- Mediatek IR remote receiver
- ZyDAS ZD1301 DVB USB interface driver
- new RC keymaps
- some very old LIRC drivers got removed from staging
- RC core gained support encoding IR scan codes
- DVB si2168 gained support for DVBv5 statistics
- lirc_sir driver ported to rc-core and promoted from staging
- other bug fixes, board additions and driver improvements
* tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (230 commits)
[media] mtk-vcodec: fix build warnings without DEBUG
[media] zd1301: fix building interface driver without demodulator
[media] usbtv: add sharpness control
[media] cxusb: Use a dma capable buffer also for reading
[media] ttpci: address stringop overflow warning
[media] dvb-usb-v2: avoid use-after-free
[media] add Hama Hybrid DVB-T Stick support
[media] et8ek8: Fix compiler / Coccinelle warnings
[media] media: fix semicolon.cocci warnings
[media] media: exynos4-is: add flags to dummy Exynos IS i2c adapter
[media] v4l: of: check for unique lanes in data-lanes and clock-lanes
[media] coda/imx-vdoa: constify structs
[media] st-delta: debug: trace stream/frame information & summary
[media] st-delta: add mjpeg support
[media] st-delta: EOS (End Of Stream) support
[media] st-delta: rpmsg ipc support
[media] st-delta: add memory allocator helper functions
[media] st-delta: STiH4xx multi-format video decoder v4l2 driver
[media] MAINTAINERS: add st-delta driver
[media] ARM: multi_v7_defconfig: enable STMicroelectronics DELTA Support
...
Linus Torvalds [Wed, 22 Feb 2017 00:34:22 +0000 (16:34 -0800)]
Merge tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Pin control bulk changes for the v4.11 kernel cycle.
Core changes:
- Switch the generic pin config argument from 16 to 24 bits, only use
8 bits for the configuration type. We might need to encode more
information about a certain setting than we need to encode
different generic settings.
- Add a cross-talk API to the pin control GPIO back-end, utilizing
pinctrl_gpio_set_config() from GPIO drivers that want to set up a
certain pin configuration in the back-end.
This also includes the .set_config() refactoring of the GPIO chips,
so that they pass a generic configuration for things like
debouncing and single ended (typically open drain). This change has
also been merged in an immutable branch to the GPIO tree.
- Take hogs with a delayed work, so that we finalize probing a pin
controller before trying to get any hogs.
- For pin controllers putting all group and function definitions into
the device tree, we now have generic code to deal with this and it
is used in two drivers so far.
- Simplifications of the pin request conflict check.
- Make dt_free_map() optional.
Updates to drivers:
- pinctrl-single now use the generic helpers to generate dynamic
group and function tables from the device tree.
- Texas Instruments IOdelay configuration driver add-on to
pinctrl-single.
- i.MX: use radix trees to store groups and functions, use the new
generic group and function helpers to manage them.
- Intel: add support for hardware debouncing and 1K pull-down. New
subdriver for the Gemini Lake SoC.
- Renesas SH-PFC: drive strength and bias support, CAN bus muxing,
MSIOF, SDHI, HSCIF for r8a7796. Gyro-ADC supporton r8a7791.
- Aspeed: use syscon cross-dependencies to set up related bits in the
LPC host controller and display controller.
- Aspeed: finalize G4 and G5 support. Fix mux configuration on GPIOs.
Add banks Y, Z, AA, AB and AC.
- AMD: support additional GPIO.
- STM32: set this controller to strict muxing mode. STM32H743 MCU
support.
- Allwinner sunxi: deep simplifications on how to support subvariants
of SoCs without adding to much SoC-specific data for each
subvariant, especially for sun5i variants. New driver for V3s SoCs.
New driver for the H5 SoC. Support A31/A31s variants with the new
variant framework.
- Mvebu: simplifications to use a MMIO and regmap abstraction. New
subdrivers for the 98DX3236, 98DX5241 SoCs.
- Samsung Exynos: delete Exynos4415 support. Add crosstalk to the SoC
driver to access regmaps. Add infrastructure for pin-bank retention
control. Clean out the pin retention control from
arch/arm/mach-exynos and arch/arm/mach-s5p and put it properly in
the Samsung pin control driver(s).
- Meson: add HDMI HPD/DDC pins. Add pwm_ao_b pin.
- Qualcomm: use raw spinlock variants: this makes the qualcomm driver
realtime-safe"
* tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (111 commits)
pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data()
pinctrl: intel: unlock on error in intel_config_set_pull()
pinctrl: berlin: make bool drivers explicitly non-modular
pinctrl: spear: make bool drivers explicitly non-modular
pinctrl: mvebu: make bool drivers explicitly non-modular
pinctrl: sunxi: make sun5i explicitly non-modular
pinctrl: sunxi: Remove stray printk call in sun5i driver's probe function
pinctrl: samsung: mark PM functions as __maybe_unused
pinctrl: sunxi: Remove redundant A31s pinctrl driver
pinctrl: sunxi: Support A31/A31s with pinctrl variants
pinctrl: Amend bindings for STM32 pinctrl
pinctrl: Add STM32 pinctrl driver DT bindings
pinctrl: stm32: Add STM32H743 MCU support
include: dt-bindings: Add STM32H7 pinctrl DT defines
gpio: aspeed: Remove dependence on GPIOF_* macros
pinctrl: stm32: fix bad location of gpiochip_lock_as_irq
drivers: pinctrl: add driver for Allwinner H5 SoC
pinctrl: intel: Add Intel Gemini Lake pin controller support
pinctrl: intel: Add support for 1k additional pull-down
pinctrl: intel: Add support for hardware debouncer
...
Jiri Kosina [Wed, 22 Feb 2017 00:13:52 +0000 (01:13 +0100)]
HID: rmi: fallback to generic/multitouch if hid-rmi is not built
Commit 279967a65b32 ("HID: rmi: Handle all Synaptics touchpads using hid-rmi")
unconditionally switches over handling of all Synaptics touchpads to hid-rmi
(to make use of extended features of the HW); in case CONFIG_HID_RMI is
disabled though this renders the touchpad unusable, as the
Linus Torvalds [Tue, 21 Feb 2017 22:28:55 +0000 (14:28 -0800)]
Merge tag 'extable-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
Pull exception table module split from Paul Gortmaker:
"Final extable.h related changes.
This completes the separation of exception table content from the
module.h header file. This is achieved with the final commit that
removes the one line back compatible change that sourced extable.h
into the module.h file.
The commits are unchanged since January, with the exception of a
couple Acks that came in for the last two commits a bit later. The
changes have been in linux-next for quite some time[1] and have got
widespread arch coverage via toolchains I have and also from
additional ones the kbuild bot has.
Maintaners of the various arch were Cc'd during the postings to
lkml[2] and informed that the intention was to take the remaining arch
specific changes and lump them together with the final two non-arch
specific changes and submit for this merge window.
The ia64 diffstat stands out and probably warrants a mention. In an
earlier review, Al Viro made a valid comment that the original header
separation of content left something to be desired, and that it get
fixed as a part of this change, hence the larger diffstat"
* tag 'extable-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (21 commits)
module.h: remove extable.h include now users have migrated
core: migrate exception table users off module.h and onto extable.h
cris: migrate exception table users off module.h and onto extable.h
hexagon: migrate exception table users off module.h and onto extable.h
microblaze: migrate exception table users off module.h and onto extable.h
unicore32: migrate exception table users off module.h and onto extable.h
score: migrate exception table users off module.h and onto extable.h
metag: migrate exception table users off module.h and onto extable.h
arc: migrate exception table users off module.h and onto extable.h
nios2: migrate exception table users off module.h and onto extable.h
sparc: migrate exception table users onto extable.h
openrisc: migrate exception table users off module.h and onto extable.h
frv: migrate exception table users off module.h and onto extable.h
sh: migrate exception table users off module.h and onto extable.h
xtensa: migrate exception table users off module.h and onto extable.h
mn10300: migrate exception table users off module.h and onto extable.h
alpha: migrate exception table users off module.h and onto extable.h
arm: migrate exception table users off module.h and onto extable.h
m32r: migrate exception table users off module.h and onto extable.h
ia64: ensure exception table search users include extable.h
...
Linus Torvalds [Tue, 21 Feb 2017 22:21:11 +0000 (14:21 -0800)]
Merge tag 'mips_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS updates from James Hogan:
"Here's the main MIPS pull request for 4.11.
It contains a few new features such as IRQ stacks, cacheinfo support,
and KASLR for Octeon CPUs, and a variety of smaller improvements and
fixes including devicetree additions, kexec cleanups, microMIPS stack
unwinding fixes, and a bunch of build fixes to clean up continuous
integration builds.
Its all been in linux-next for at least a couple of days, most of it
far longer.
Miscellaneous:
- Add IRQ stacks
- Add cacheinfo support
- Add "uzImage.bin" zboot target
- Unify performance counter definitions
- Export various (mainly assembly) symbols alongside their
definitions
- Audit and remove unnecessary uses of module.h
kexec & kdump:
- Lots of improvements and fixes
- Add correct copy_regs implementations
- Add debug logging of new kernel information
Security:
- Use Makefile.postlink to insert relocations into vmlinux
- Provide plat_post_relocation hook (used for Octeon KASLR)
- Add support for tuning mmap randomisation
- Relocate DTB
microMIPS:
- A load of unwind fixes
- Add some missing .insn to fix link errors
MIPSr6:
- Fix MULTU/MADDU/MSUBU sign extension in r2 emulation
- Remove r2_emul_return and use ERETNC unconditionally on MIPSr6
- Allow pre-r6 emulation on SMP MIPSr6 kernels
Memory management:
- Ensure bootmem doesn't corrupt reserved memory
- Export some TLB exception generation functions for KVM
OF:
- NULL check initial_boot_params before use in of_scan_flat_dt()
- Fix unaligned access in of_alias_scan()
SMP:
- CPS: Don't BUG if a CPU fails to start
Other fixes:
- Fix longstanding 64-bit IP checksum carry bug
- Fix KERN_CONT fallout in cpu-bugs64.c and sync-r4k.c
- Update defconfigs for NF_CT_PROTO_DCCP, DPLITE,
CPU_FREQ_STAT,SCSI_DH changes
- Disable certain builtin compiler options, stack-check (whole
kernel), asynchronous-unwind-tables (VDSO).
- A bunch of build fixes from kernelci.org testing
- Various other minor cleanups & corrections
Lantiq:
- Refresh defconfig and activate more drivers
- Lock DMA register access
- Fix cascading IRQ setup
- Fix build of VPE loader
- xway: Fix ethernet packet header corruption over reboot
Loongson1
- Add watchdog support
- 1B: Reduce DEFAULT_MEMSIZE to 64MB
- 1B: Change OSC clock name to match rest of kernel
- 1C: Remove ARCH_WANT_OPTIONAL_GPIOLIB
Octeon:
- Add KASLR support
- Support Octeon III USB controller
- Fix large copy_from_user corner case
- Enable devtmpfs in defconfig
Netlogic:
- Fix non-default XLR build error due to netlogic,xlp-pic code
- Fix assembler warning from smpboot.S
pic32mzda:
- Fix linker error when early printk is disabled
Pistachio:
- Add base device tree
- Add Ci40 "Marduk" device tree
Ralink:
- Support raw appended DTB
- Add missing I2C & I2S clocks
- Add missing pinmux and fix pinmux function name typo
- Add missing clk_round_rate()
- Clean up prom_init()
- MT7621: Set SoC type
- MT7621: Support highmem
TXx9:
- Modernize printing of kernel messages and resolve KERN_CONT fallout
- 7segled: use permission-specific DEVICE_ATTR variants
XilFPGA:
- Add IRQ controller and UART IRQ
- Add AXI I2C and emaclite to DT & defconfig"
* tag 'mips_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (148 commits)
MIPS: VDSO: Explicitly use -fno-asynchronous-unwind-tables
MIPS: BCM47XX: Fix button inversion for Asus WL-500W
MIPS: DTS: Add img directory to Makefile
MIPS: ip27: Disable qlge driver in defconfig
MIPS: pic32mzda: Fix linker error for pic32_get_pbclk()
MIPS: Lantiq: Keep ethernet enabled during boot
MIPS: OCTEON: Fix copy_from_user fault handling for large buffers
MIPS: Fix special case in 64 bit IP checksumming.
MIPS: OCTEON: Enable DEVTMPFS
MIPS: lantiq: Set physical_memsize
MIPS: sysmips: Remove duplicated include from syscall.c
Kbuild: Add cpp_its_S in ksym_dep_filter
MIPS: Audit and remove any unnecessary uses of module.h
MIPS: Unify perf counter register definitions
MIPS: Disable stack checks on MIPS kernels
MIPS: OCTEON: Platform support for OCTEON III USB controller
MIPS: Lantiq: Fix cascaded IRQ setup
MIPS: sync-r4k: Fix KERN_CONT fallout
MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch
MIPS: Fix distclean with Makefile.postlink
...
Linus Torvalds [Tue, 21 Feb 2017 21:53:41 +0000 (13:53 -0800)]
Merge tag 'for-linus-4.11-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
"Xen features and fixes:
- a series from Boris Ostrovsky adding support for booting Linux as
Xen PVH guest
- a series from Juergen Gross streamlining the xenbus driver
- a series from Paul Durrant adding support for the new device model
hypercall
- several small corrections"
* tag 'for-linus-4.11-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/privcmd: add IOCTL_PRIVCMD_RESTRICT
xen/privcmd: Add IOCTL_PRIVCMD_DM_OP
xen/privcmd: return -ENOTTY for unimplemented IOCTLs
xen: optimize xenbus driver for multiple concurrent xenstore accesses
xen: modify xenstore watch event interface
xen: clean up xenbus internal headers
xenbus: Neaten xenbus_va_dev_error
xen/pvh: Use Xen's emergency_restart op for PVH guests
xen/pvh: Enable CPU hotplug
xen/pvh: PVH guests always have PV devices
xen/pvh: Initialize grant table for PVH guests
xen/pvh: Make sure we don't use ACPI_IRQ_MODEL_PIC for SCI
xen/pvh: Bootstrap PVH guest
xen/pvh: Import PVH-related Xen public interfaces
xen/x86: Remove PVH support
x86/boot/32: Convert the 32-bit pgtable setup code from assembly to C
xen/manage: correct return value check on xenbus_scanf()
x86/xen: Fix APIC id mismatch warning on Intel
xen/netback: set default upper limit of tx/rx queues to 8
xen/netfront: set default upper limit of tx/rx queues to 8
Linus Torvalds [Tue, 21 Feb 2017 21:25:50 +0000 (13:25 -0800)]
Merge branch 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit
Pull audit updates from Paul Moore:
"The audit changes for v4.11 are relatively small compared to what we
did for v4.10, both in terms of size and impact.
- two patches from Steve tweak the formatting for some of the audit
records to make them more consistent with other audit records.
- three patches from Richard record the name of a module on module
load, fix the logging of sockaddr information when using
socketcall() on 32-bit systems, and add the ability to reset
audit's lost record counter.
- my lone patch just fixes an annoying style nit that I was reminded
about by one of Richard's patches.
All these patches pass our test suite"
* 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit:
audit: remove unnecessary curly braces from switch/case statements
audit: log module name on init_module
audit: log 32-bit socketcalls
audit: add feature audit_lost reset
audit: Make AUDIT_ANOM_ABEND event normalized
audit: Make AUDIT_KERNEL event conform to the specification
Linus Torvalds [Tue, 21 Feb 2017 20:49:56 +0000 (12:49 -0800)]
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security layer updates from James Morris:
"Highlights:
- major AppArmor update: policy namespaces & lots of fixes
- add /sys/kernel/security/lsm node for easy detection of loaded LSMs
- SELinux cgroupfs labeling support
- SELinux context mounts on tmpfs, ramfs, devpts within user
namespaces
- improved TPM 2.0 support"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (117 commits)
tpm: declare tpm2_get_pcr_allocation() as static
tpm: Fix expected number of response bytes of TPM1.2 PCR Extend
tpm xen: drop unneeded chip variable
tpm: fix misspelled "facilitate" in module parameter description
tpm_tis: fix the error handling of init_tis()
KEYS: Use memzero_explicit() for secret data
KEYS: Fix an error code in request_master_key()
sign-file: fix build error in sign-file.c with libressl
selinux: allow changing labels for cgroupfs
selinux: fix off-by-one in setprocattr
tpm: silence an array overflow warning
tpm: fix the type of owned field in cap_t
tpm: add securityfs support for TPM 2.0 firmware event log
tpm: enhance read_log_of() to support Physical TPM event log
tpm: enhance TPM 2.0 PCR extend to support multiple banks
tpm: implement TPM 2.0 capability to get active PCR banks
tpm: fix RC value check in tpm2_seal_trusted
tpm_tis: fix iTPM probe via probe_itpm() function
tpm: Begin the process to deprecate user_read_timer
tpm: remove tpm_read_index and tpm_write_index from tpm.h
...
Linus Torvalds [Tue, 21 Feb 2017 20:11:41 +0000 (12:11 -0800)]
Merge tag 'dm-4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Fix dm-raid transient device failure processing and other smaller
tweaks.
- Add journal support to the DM raid target to close the 'write hole'
on raid 4/5/6.
- Fix dm-cache corruption, due to rounding bug, when cache exceeds 2TB.
- Add 'metadata2' feature to dm-cache to separate the dirty bitset out
from other cache metadata. This improves speed of shutting down a
large cache device (which implies writing out dirty bits).
- Fix a memory leak during dm-stats data structure destruction.
- Fix a DM multipath round-robin path selector performance regression
that was caused by less precise balancing across all paths.
- Lastly, introduce a DM core fix for a long-standing DM snapshot
deadlock that is rooted in the complexity of the device stack used in
conjunction with block core maintaining bios on current->bio_list to
manage recursion in generic_make_request(). A more comprehensive fix
to block core (and its hook in the cpu scheduler) would be wonderful
but this DM-specific fix is pragmatic considering how difficult it
has been to make progress on a generic fix.
* tag 'dm-4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (22 commits)
dm: flush queued bios when process blocks to avoid deadlock
dm round robin: revert "use percpu 'repeat_count' and 'current_path'"
dm stats: fix a leaked s->histogram_boundaries array
dm space map metadata: constify dm_space_map structures
dm cache metadata: use cursor api in blocks_are_clean_separate_dirty()
dm persistent data: add cursor skip functions to the cursor APIs
dm cache metadata: use dm_bitset_new() to create the dirty bitset in format 2
dm bitset: add dm_bitset_new()
dm cache metadata: name the cache block that couldn't be loaded
dm cache metadata: add "metadata2" feature
dm cache metadata: use bitset cursor api to load discard bitset
dm bitset: introduce cursor api
dm btree: use GFP_NOFS in dm_btree_del()
dm space map common: memcpy the disk root to ensure it's arch aligned
dm block manager: add unlikely() annotations on dm_bufio error paths
dm cache: fix corruption seen when using cache > 2TB
dm raid: cleanup awkward branching in raid_message() option processing
dm raid: use mddev rather than rdev->mddev
dm raid: use read_disk_sb() throughout
dm raid: add raid4/5/6 journaling support
...
Linus Torvalds [Tue, 21 Feb 2017 20:04:54 +0000 (12:04 -0800)]
Merge tag 'mmc-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add support for Marvell SD8787 Wifi/BT chip
- Improve UHS support for SDIO
- Invent MMC_CAP_3_3V_DDR and a DT binding for eMMC DDR 3.3V mode
- Detect Auto BKOPS enable bit
- Export eMMC device lifetime information through sysfs
- First take to slim down the public mmc headers to avoid abuse
- Re-factoring of the mmc block device driver to prepare for blkmq
- Cleanup code for the mmc block device driver
- Clarify and cleanup code dealing with data requests
- Cleanup some code by converting to ida_simple_ functions
- Cleanup code dealing with card quirks
- Cleanup private and public mmc header files
MMC host:
- Don't rely on public mmc headers to include non-mmc related headers
- meson: Add support for eMMC HS400 mode
- meson: Various cleanups and improvements
- omap_hsmmc: Use the proper provided busy timeout from the core
- sunxi: Enable new timings for the A64 MMC controllers
- sunxi: Improvements for clock management
- tmio: Improvements for SDIO interrupts
- mxs-mmc: Add CMD23 support
- sdhci-msm: Enable HS400 enhanced strobe mode support
- sdhci-msm: Correct HS400 tuning sequence
- sdhci-acpi: Support deferred probe
- sdhci-pci: Add support for eMMC HS200 tuning mode on AMD
- mediatek: Correct the implementation of card busy detection
- dw_mmc: Initial support for ZX mmc controller
- sh_mobile_sdhi: Enable support for eMMC HS200 mode
- sh_mmcif: Various cleanups and improvements"
* tag 'mmc-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (145 commits)
mmc: core: add mmc prefix for blk_fixups
mmc: core: move all quirks together into quirks.h
mmc: core: improve the quirks for sdio devices
mmc: core: move some sdio IDs out of quirks file
mmc: core: change quirks.c to be a header file
mmc: sdhci-cadence: fix bit shift of read data from PHY port
mmc: Adding AUTO_BKOPS_EN bit set for Auto BKOPS support
mmc: MAN_BKOPS_EN inverse debug message logic
mmc: meson-gx: add support for HS400 mode
mmc: meson-gx: remove unneeded checks in remove
mmc: meson-gx: reduce bounce buffer size
mmc: meson-gx: set max block count and request size
mmc: meson-gx: improve interrupt handling
mmc: meson-gx: improve meson_mmc_irq_thread
mmc: meson-gx: improve meson_mmc_clk_set
mmc: meson-gx: minor improvements in meson_mmc_set_ios
mmc: meson: Assign the minimum clk rate as close to 400KHz as possible
mmc: core: start to break apart mmc_start_areq()
mmc: block: respect bool returned from blk_end_request()
mmc: block: return errorcode from mmc_sd_num_wr_blocks()
...
Linus Torvalds [Tue, 21 Feb 2017 19:51:42 +0000 (11:51 -0800)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This update includes the usual round of major driver updates (ncr5380,
ufs, lpfc, be2iscsi, hisi_sas, storvsc, cxlflash, aacraid,
megaraid_sas, ...).
There's also an assortment of minor fixes and the major update of
switching a bunch of drivers to pci_alloc_irq_vectors from Christoph"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (188 commits)
scsi: megaraid_sas: handle dma_addr_t right on 32-bit
scsi: megaraid_sas: array overflow in megasas_dump_frame()
scsi: snic: switch to pci_irq_alloc_vectors
scsi: megaraid_sas: driver version upgrade
scsi: megaraid_sas: Change RAID_1_10_RMW_CMDS to RAID_1_PEER_CMDS and set value to 2
scsi: megaraid_sas: Indentation and smatch warning fixes
scsi: megaraid_sas: Cleanup VD_EXT_DEBUG and SPAN_DEBUG related debug prints
scsi: megaraid_sas: Increase internal command pool
scsi: megaraid_sas: Use synchronize_irq to wait for IRQs to complete
scsi: megaraid_sas: Bail out the driver load if ld_list_query fails
scsi: megaraid_sas: Change build_mpt_mfi_pass_thru to return void
scsi: megaraid_sas: During OCR, if get_ctrl_info fails do not continue with OCR
scsi: megaraid_sas: Do not set fp_possible if TM capable for non-RW syspdIO, change fp_possible to bool
scsi: megaraid_sas: Remove unused pd_index from megasas_build_ld_nonrw_fusion
scsi: megaraid_sas: megasas_return_cmd does not memset IO frame to zero
scsi: megaraid_sas: max_fw_cmds are decremented twice, remove duplicate
scsi: megaraid_sas: update can_queue only if the new value is less
scsi: megaraid_sas: Change max_cmd from u32 to u16 in all functions
scsi: megaraid_sas: set pd_after_lb from MR_BuildRaidContext and initialize pDevHandle to MR_DEVHANDLE_INVALID
scsi: megaraid_sas: latest controller OCR capability from FW before sending shutdown DCMD
...
Linus Torvalds [Tue, 21 Feb 2017 18:57:33 +0000 (10:57 -0800)]
Merge tag 'for-4.11/linus-merge-signed' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
- blk-mq scheduling framework from me and Omar, with a port of the
deadline scheduler for this framework. A port of BFQ from Paolo is in
the works, and should be ready for 4.12.
- Various fixups and improvements to the above scheduling framework
from Omar, Paolo, Bart, me, others.
- Cleanup of the exported sysfs blk-mq data into debugfs, from Omar.
This allows us to export more information that helps debug hangs or
performance issues, without cluttering or abusing the sysfs API.
- Fixes for the sbitmap code, the scalable bitmap code that was
migrated from blk-mq, from Omar.
- Removal of the BLOCK_PC support in struct request, and refactoring of
carrying SCSI payloads in the block layer. This cleans up the code
nicely, and enables us to kill the SCSI specific parts of struct
request, shrinking it down nicely. From Christoph mainly, with help
from Hannes.
- Support for ranged discard requests and discard merging, also from
Christoph.
- Support for OPAL in the block layer, and for NVMe as well. Mainly
from Scott Bauer, with fixes/updates from various others folks.
- Error code fixup for gdrom from Christophe.
- cciss pci irq allocation cleanup from Christoph.
- Making the cdrom device operations read only, from Kees Cook.
- Fixes for duplicate bdi registrations and bdi/queue life time
problems from Jan and Dan.
- Set of fixes and updates for lightnvm, from Matias and Javier.
- A few fixes for nbd from Josef, using idr to name devices and a
workqueue deadlock fix on receive. Also marks Josef as the current
maintainer of nbd.
- Fix from Josef, overwriting queue settings when the number of
hardware queues is updated for a blk-mq device.
- NVMe fix from Keith, ensuring that we don't repeatedly mark and IO
aborted, if we didn't end up aborting it.
- SG gap merging fix from Ming Lei for block.
- Loop fix also from Ming, fixing a race and crash between setting loop
status and IO.
- Two block race fixes from Tahsin, fixing request list iteration and
fixing a race between device registration and udev device add
notifiations.
- Double free fix from cgroup writeback, from Tejun.
- Another double free fix in blkcg, from Hou Tao.
- Partition overflow fix for EFI from Alden Tondettar.
* tag 'for-4.11/linus-merge-signed' of git://git.kernel.dk/linux-block: (156 commits)
nvme: Check for Security send/recv support before issuing commands.
block/sed-opal: allocate struct opal_dev dynamically
block/sed-opal: tone down not supported warnings
block: don't defer flushes on blk-mq + scheduling
blk-mq-sched: ask scheduler for work, if we failed dispatching leftovers
blk-mq: don't special case flush inserts for blk-mq-sched
blk-mq-sched: don't add flushes to the head of requeue queue
blk-mq: have blk_mq_dispatch_rq_list() return if we queued IO or not
block: do not allow updates through sysfs until registration completes
lightnvm: set default lun range when no luns are specified
lightnvm: fix off-by-one error on target initialization
Maintainers: Modify SED list from nvme to block
Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN
uapi: sed-opal fix IOW for activate lsp to use correct struct
cdrom: Make device operations read-only
elevator: fix loading wrong elevator type for blk-mq devices
cciss: switch to pci_irq_alloc_vectors
block/loop: fix race between I/O and set_status
blk-mq-sched: don't hold queue_lock when calling exit_icq
block: set make_request_fn manually in blk_mq_update_nr_hw_queues
...
Mark Brown [Tue, 21 Feb 2017 17:29:01 +0000 (09:29 -0800)]
sched/core: Fix build paravirt build on arm and arm64
Commit 004172bdad64 ("sched/core: Remove unnecessary #include headers")
removed the inclusion of asm/paravirt.h which is used to get
declarations of paravirt_steal_rq_enabled and paravirt_steal_clock.
It is implicitly included on x86 but not on arm and arm64 breaking the
build if paravirtualization is used. Since things from that header are
used directly fix the build by putting the direct inclusion back.
Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 21 Feb 2017 15:46:34 +0000 (07:46 -0800)]
Merge tag 'gfs2-4.11.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Robert Peterson:
"We've got eight GFS2 patches for this merge window:
- Andy Price submitted a patch to make gfs2_write_full_page a static
function.
- Dan Carpenter submitted a patch to fix a ERR_PTR thinko.
Three patches fix bugs related to deleting very large files, which
cause GFS2 to run out of journal space:
- The first one prevents GFS2 delete operation from requesting too
much journal space.
- The second one fixes a problem whereby GFS2 can hang because it
wasn't taking journal space demand into its calculations.
- The third one wakes up IO waiters when a flush is done to restart
processes stuck waiting for journal space to become available.
The final three patches are a performance improvement related to
spin_lock contention between multiple writers:
- The "tr_touched" variable was switched to a flag to be more atomic
and eliminate the possibility of some races.
- Function meta_lo_add was moved inline with its only caller to make
the code more readable and efficient.
- Contention on the gfs2_log_lock spinlock was greatly reduced by
avoiding the lock altogether in cases where we don't really need
it: buffers that already appear in the appropriate metadata list
for the journal. Many thanks to Steve Whitehouse for the ideas and
principles behind these patches"
* tag 'gfs2-4.11.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Make gfs2_write_full_page static
GFS2: Reduce contention on gfs2_log_lock
GFS2: Inline function meta_lo_add
GFS2: Switch tr_touched to flag in transaction
GFS2: Wake up io waiters whenever a flush is done
GFS2: Made logd daemon take into account log demand
GFS2: Limit number of transaction blocks requested for truncates
GFS2: Fix reference to ERR_PTR in gfs2_glock_iter_next
Linus Torvalds [Tue, 21 Feb 2017 15:44:03 +0000 (07:44 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull UDF fixes and cleanups from Jan Kara:
"Several small UDF fixes and cleanups and a small cleanup of fanotify
code"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: simplify the code of fanotify_merge
udf: simplify udf_ioctl()
udf: fix ioctl errors
udf: allow implicit blocksize specification during mount
udf: check partition reference in udf_read_inode()
udf: atomically read inode size
udf: merge module informations in super.c
udf: remove next_epos from udf_update_extent_cache()
udf: Factor out trimming of crtime
udf: remove empty condition
udf: remove unneeded line break
udf: merge bh free
udf: use pointer for kernel_long_ad argument
udf: use __packed instead of __attribute__ ((packed))
udf: Make stat on symlink report symlink length as st_size
fs/udf: make #ifdef UDF_PREALLOCATE unconditional
fs: udf: Replace CURRENT_TIME with current_time()
Linus Torvalds [Tue, 21 Feb 2017 02:38:47 +0000 (18:38 -0800)]
Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Pull CIFS/SMB3 updates from Steve French:
"Includes support for a critical SMB3 security feature: per-share
encryption from Pavel, and a cleanup from Jean Delvare.
Will have another cifs/smb3 merge next week"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: Allow to switch on encryption with seal mount option
CIFS: Add capability to decrypt big read responses
CIFS: Decrypt and process small encrypted packets
CIFS: Add copy into pages callback for a read operation
CIFS: Add mid handle callback
CIFS: Add transform header handling callbacks
CIFS: Encrypt SMB3 requests before sending
CIFS: Enable encryption during session setup phase
CIFS: Add capability to transform requests before sending
CIFS: Separate RFC1001 length processing for SMB2 read
CIFS: Separate SMB2 sync header processing
CIFS: Send RFC1001 length in a separate iov
CIFS: Make send_cancel take rqst as argument
CIFS: Make SendReceive2() takes resp iov
CIFS: Separate SMB2 header structure
CIFS: Fix splice read for non-cached files
cifs: Add soft dependencies
cifs: Only select the required crypto modules
cifs: Simplify SMB2 and SMB311 dependencies
Linus Torvalds [Tue, 21 Feb 2017 02:24:39 +0000 (18:24 -0800)]
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"For this cycle we add support for the shutdown ioctl, which is
primarily used for testing, but which can be useful on production
systems when a scratch volume is being destroyed and the data on it
doesn't need to be saved.
This found (and we fixed) a number of bugs with ext4's recovery to
corrupted file system --- the bugs increased the amount of data that
could be potentially lost, and in the case of the inline data feature,
could cause the kernel to BUG.
Also included are a number of other bug fixes, including in ext4's
fscrypt, DAX, inline data support"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (26 commits)
ext4: rename EXT4_IOC_GOINGDOWN to EXT4_IOC_SHUTDOWN
ext4: fix fencepost in s_first_meta_bg validation
ext4: don't BUG when truncating encrypted inodes on the orphan list
ext4: do not use stripe_width if it is not set
ext4: fix stripe-unaligned allocations
dax: assert that i_rwsem is held exclusive for writes
ext4: fix DAX write locking
ext4: add EXT4_IOC_GOINGDOWN ioctl
ext4: add shutdown bit and check for it
ext4: rename s_resize_flags to s_ext4_flags
ext4: return EROFS if device is r/o and journal replay is needed
ext4: preserve the needs_recovery flag when the journal is aborted
jbd2: don't leak modified metadata buffers on an aborted journal
ext4: fix inline data error paths
ext4: move halfmd4 into hash.c directly
ext4: fix use-after-iput when fscrypt contexts are inconsistent
jbd2: fix use after free in kjournald2()
ext4: fix data corruption in data=journal mode
ext4: trim allocation requests to group size
ext4: replace BUG_ON with WARN_ON in mb_find_extent()
...
Linus Torvalds [Tue, 21 Feb 2017 02:22:31 +0000 (18:22 -0800)]
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt
Pull fscrypt updates from Ted Ts'o:
"Various cleanups for the file system encryption feature"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
fscrypt: constify struct fscrypt_operations
fscrypt: properly declare on-stack completion
fscrypt: split supp and notsupp declarations into their own headers
fscrypt: remove redundant assignment of res
fscrypt: make fscrypt_operations.key_prefix a string
fscrypt: remove unused 'mode' member of fscrypt_ctx
ext4: don't allow encrypted operations without keys
fscrypt: make test_dummy_encryption require a keyring key
fscrypt: factor out bio specific functions
fscrypt: pass up error codes from ->get_context()
fscrypt: remove user-triggerable warning messages
fscrypt: use EEXIST when file already uses different policy
fscrypt: use ENOTDIR when setting encryption policy on nondirectory
fscrypt: use ENOKEY when file cannot be created w/o key
Linus Torvalds [Tue, 21 Feb 2017 02:06:09 +0000 (18:06 -0800)]
Merge tag 'device-properties-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device property updates from Rafael J. Wysocki:
"Generic device properties framework updates for v4.11-rc1
Allow built-in (static) device properties to be declared as constant,
make it possible to save memory by discarding alternative (but unused)
built-in (static) property sets and add support for automatic handling
of built-in properties to the I2C code"
* tag 'device-properties-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
i2c: allow specify device properties in i2c_board_info
device property: export code duplicating array of property entries
device property: constify property arrays values
device property: allow to constify properties
Linus Torvalds [Tue, 21 Feb 2017 01:55:15 +0000 (17:55 -0800)]
Merge tag 'acpi-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision 20170119, which among other things updates copyright notices in all of
the ACPICA files, fix a couple of issues in the ACPI EC and button
drivers, fix modalias handling for non-discoverable devices with
DT-compatible identification strings, add a suspend quirk for one
platform and fix a message in the APEI code.
Specifics:
- Update of the ACPICA code in the kernel to upstream revision 20170119 including:
+ Fixes related to the handling of the bit width and bit offset
fields in Generic Address Structure (Lv Zheng)
+ ACPI resources handling fix related to invalid resource
descriptors (Bob Moore)
+ Fix to enable implicit result conversion for several ASL library
functions (Bob Moore)
+ Support for method invocations as target operands in AML (Bob
Moore)
+ Fix to use a correct operand type for DeRefOf() in some
situations (Bob Moore)
+ Utilities updates (Bob Moore, Lv Zheng)
+ Disassembler/debugger updates (David Box, Lv Zheng)
+ Build fixes (Colin Ian King, Lv Zheng)
+ Update of copyright notices in all files (Bob Moore)
- Fix for modalias handling for SPI and I2C devices with
DT-compatible identification strings (Dan O'Donovan)
- Fixes for the ACPI EC and button drivers (Lv Zheng)
- ACPI processor handling fix related to CPU hotplug (online/offline)
on x86 (Vitaly Kuznetsov)
- Suspend quirk to save/restore NVS memory over S3 transitions for
Lenovo G50-45 (Zhang Rui)
- Message formatting fix for the ACPI APEI code (Colin Ian King)"
* tag 'acpi-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
ACPICA: Update version to 20170119
ACPICA: Tools: Update common signon, remove compilation bit width
ACPICA: Source tree: Update copyright notices to 2017
ACPICA: Linuxize: Restore and fix Intel compiler build
x86/ACPI: keep x86_cpu_to_acpiid mapping valid on CPU hotplug
spi: acpi: Initialize modalias from of_compatible
i2c: acpi: Initialize info.type from of_compatible
ACPI / bus: Introduce acpi_of_modalias() equiv of of_modalias_node()
ACPI: save NVS memory for Lenovo G50-45
ACPI, APEI, EINJ: fix malformed newline escape
ACPI / button: Remove lid_init_state=method mode
ACPI / button: Change default behavior to lid_init_state=open
ACPI / EC: Use busy polling mode when GPE is not enabled
ACPI / EC: Remove old CLEAR_ON_RESUME quirk
ACPICA: Update version to 20161222
ACPICA: Parser: Update parse info table for some operators
ACPICA: Fix a problem with recent extra support for control method invocations
ACPICA: Parser: Allow method invocations as target operands
ACPICA: Fix for implicit result conversion for the ToXXX functions
ACPICA: Resources: Not a valid resource if buffer length too long
..
Linus Torvalds [Tue, 21 Feb 2017 01:41:31 +0000 (17:41 -0800)]
Merge tag 'pm-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The majority of changes go into the Operating Performance Points (OPP)
framework and cpufreq this time, followed by devfreq and some
scattered updates all over.
The OPP changes are mostly related to switching over from RCU-based
synchronization, that turned out to be overly complicated and
problematic, to reference counting using krefs.
In the cpufreq land there are core cleanups, documentation updates, a
new driver for Broadcom BMIPS SoCs, a new cpufreq-dt sub-driver for TI
SoCs that require special handling, ARM64 SoCs support for the qoriq
driver, intel_pstate updates, powernv driver update and assorted
fixes.
The devfreq changes are mostly fixes related to the sysfs interface
and some Exynos drivers updates.
Apart from that, the cpuidle menu governor will support per-CPU PM QoS
constraints for the wakeup latency now, some bugs in the wakeup IRQs
framework are fixed, the generic power domains framework should handle
asynchronous invocations of *noirq suspend/resume callbacks from now
on, the analyze_suspend.py script is updated and there is a new tool
for intel_pstate diagnostics.
Specifics:
- Operating Performance Points (OPP) framework fixes, cleanups and
switch over from RCU-based synchronization to reference counting
using krefs (Viresh Kumar, Wei Yongjun, Dave Gerlach)
- cpufreq core cleanups and documentation updates (Viresh Kumar,
Rafael Wysocki)
- New cpufreq driver for Broadcom BMIPS SoCs (Markus Mayer)
- New cpufreq-dt sub-driver for TI SoCs requiring special handling,
like in the AM335x, AM437x, DRA7x, and AM57x families, along with
new DT bindings for it (Dave Gerlach, Paul Gortmaker)
- ARM64 SoCs support for the qoriq cpufreq driver (Tang Yuantian)
- intel_pstate driver updates including a new sysfs knob to control
the driver's operation mode and fixes related to the no_turbo sysfs
knob and the hardware-managed P-states feature support (Rafael
Wysocki, Srinivas Pandruvada)
- New interface to export ultra-turbo frequencies for the powernv
cpufreq driver (Shilpasri Bhat)
- Assorted fixes for cpufreq drivers (Arnd Bergmann, Dan Carpenter,
Wei Yongjun)
- devfreq core fixes, mostly related to the sysfs interface exported
by it (Chanwoo Choi, Chris Diamand)
- Updates of the exynos-bus and exynos-ppmu devfreq drivers (Chanwoo
Choi)
- Device PM QoS extension to support CPUs and support for per-CPU
wakeup (device resume) latency constraints in the cpuidle menu
governor (Alex Shi)
- Wakeup IRQs framework fixes (Grygorii Strashko)
- Generic power domains framework update including a fix to make it
handle asynchronous invocations of *noirq suspend/resume callbacks
correctly (Ulf Hansson, Geert Uytterhoeven)
- Assorted fixes and cleanups in the core suspend/hibernate code, PM
QoS framework and x86 ACPI idle support code (Corentin Labbe, Geert
Uytterhoeven, Geliang Tang, John Keeping, Nick Desaulniers)
- Update of the analyze_suspend.py script is updated to version 4.5
offering multiple improvements (Todd Brandt)
- New tool for intel_pstate diagnostics using the pstate_sample
tracepoint (Doug Smythies)"
* tag 'pm-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (85 commits)
MAINTAINERS: cpufreq: add bmips-cpufreq.c
PM / QoS: Fix memory leak on resume_latency.notifiers
PM / Documentation: Spelling s/wrtie/write/
PM / sleep: Fix test_suspend after sleep state rework
cpufreq: CPPC: add ACPI_PROCESSOR dependency
cpufreq: make ti-cpufreq explicitly non-modular
cpufreq: Do not clear real_cpus mask on policy init
tools/power/x86: Debug utility for intel_pstate driver
AnalyzeSuspend: fix drag and zoom bug in javascript
PM / wakeirq: report a wakeup_event on dedicated wekup irq
PM / wakeirq: Fix spurious wake-up events for dedicated wakeirqs
PM / wakeirq: Enable dedicated wakeirq for suspend
cpufreq: dt: Don't use generic platdev driver for ti-cpufreq platforms
cpufreq: ti: Add cpufreq driver to determine available OPPs at runtime
Documentation: dt: add bindings for ti-cpufreq
PM / OPP: Expose _of_get_opp_desc_node as dev_pm_opp API
cpufreq: qoriq: Don't look at clock implementation details
cpufreq: qoriq: add ARM64 SoCs support
PM / Domains: Provide dummy governors if CONFIG_PM_GENERIC_DOMAINS=n
cpufreq: brcmstb-avs-cpufreq: remove unnecessary platform_set_drvdata()
...
Linus Torvalds [Tue, 21 Feb 2017 01:31:23 +0000 (17:31 -0800)]
Merge tag 'leds_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"New features and improvements:
- add new optional brightness_hw_changed attribute for the LEDs that
may have their brightness level changed autonomously (outside of
kernel control) by hardware / firmware. The attribute supports
userspace notifications through POLLPRI events
- add led_brightness_hw_mon tool that demonstrates how to use the
aforementioned feature
- add LED_ON enum for LEDs that can be only turned on/off, and don't
allow setting other brightness levels
- allow for adjusting heartbeat trigger blink brightness level
Fixes and cleanups:
- avoid harmless maybe-uninitialized warning in leds-ktd2692.c
- add context to the existing example entries in common LED bindings
to make the documentation more clear"
* tag 'leds_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: ledtrig-heartbeat: Make top brightness adjustable
tools/leds: Add led_hw_brightness_mon program
leds: class: Add new optional brightness_hw_changed attribute
leds: ktd2692: avoid harmless maybe-uninitialized warning
leds: add LED_ON brightness as boolean value
DT: leds: Improve examples by adding some context
Linus Torvalds [Tue, 21 Feb 2017 01:26:11 +0000 (17:26 -0800)]
Merge tag 'spi-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This release is mainly a collection of driver specific updates,
including a few nice cleanups to make drivers use more core features.
- automatically use the parent device to allocate DMA buffers if
there wasn't an explicitly configured device.
- fixes for leaks on allocation.
- a small piece of the start of SPI slave support, a feature that's
been on the cards for over a decade!"
* tag 'spi-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (55 commits)
spi: spi-ti-qspi: Fix error handling
spi: spi-ti-qspi: Fix error handling
spi: lantiq-ssc: activate under COMPILE_TEST
spi: armada-3700: Remove spi_master_put in a3700_spi_remove()
spi: ti-qspi: revise ti_qspi_probe() failure flow
spi: spi-ep93xx: simplify GPIO chip selects
spi: rspi: Replaces "n" by "len" in qspi_transfer_*()
spi: rspi: Fixes bogus received byte in qspi_transfer_in()
spi: bcm-qspi: Remove unnecessary platform_set_drvdata()
spi: bcm-qspi: Fix bcm_qspi_bspi_read() performance
spi: lantiq-ssc: add support for Lantiq SSC SPI controller
spi: s3c64xx: fix inconsistency between binding and driver
spi: armada-3700: Remove .owner field for driver
spi: bcm-qspi: Added mspi read fallback in bcm_qspi_flash_read()
spi: fix device-node leaks
spi: mediatek: Only do dma for 4-byte aligned buffers
spi: When no dma_chan map buffers with spi_master's parent
spi: pca2xx-pci: Allow MSI
spi: pxa2xx: Prepare for edge-triggered interrupts
spi: pxa2xx: Add support for Intel Gemini Lake
...
Linus Torvalds [Tue, 21 Feb 2017 01:23:57 +0000 (17:23 -0800)]
Merge tag 'regulator-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Quite a lot of work going on the core this release, mainly around
system initialization, but a quiet release for drivers:
- fixes for registration of multiple regulators on a PMIC from Javier
Martinez Canillas and Jon Hunter.
- cleanups to the regulator_get() code from Dmitry Torokhov
- lots of constifcation of structs from Bhumika Goyal
- support for Motorola CPCAP regulators from Tony Lindgren"
Linus Torvalds [Tue, 21 Feb 2017 01:20:34 +0000 (17:20 -0800)]
Merge tag 'regmap-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"For v4.11 activity on the regmap API has literally doubled, there are
two patches this release:
- fixes from Charles Keepax to make the kerneldoc generate correctly
- a cleanup from Geliang Tang using rb_entry() rather than open
coding it with container_of()"
* tag 'regmap-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Fixup the kernel-doc comments on functions/structures
regmap: use rb_entry()
Linus Torvalds [Tue, 21 Feb 2017 01:16:43 +0000 (17:16 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:
- a lot of Wacom driver updates; most notably second generation Intuos
Pro is now supported, code from Aaron Armstrong Skomra and Jason
Gerecke
- Surface 3 and 4 Type Cover Pro support from Daniel Keller, Dennis
Chen and Yuta Kobayashi
- hid-rmi is now generic transport driver, used by synaptics-rmi4;
Support the Lenovo Thinkpad X1 Tablet dock follows on top, from
Andrew Duggan
- a few misc bugfixes and improvements here and there
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (29 commits)
HID: intel-ish-hid: constify device_type structure
HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/range
HID: intel-ish-hid: ipc: check FW status to distinguish ISH resume paths
HID: multitouch: fix LG Melfas touchscreen
HID: wacom: don't apply generic settings to old devices
HID: wacom: generic: support LEDs
HID: wacom: generic: support generic touch switch
HID: wacom: generic: add vendor defined touch
HID: wacom: generic: add support for touchring
HID: wacom: generic: remove input_event_flag
HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface
HID: wacom: Move WAC_CMD_* into wacom_wac.h
HID: wacom: Enable HID_GENERIC codepath for Bluetooth devices
HID: wacom: do not attempt to switch mode while in probe
HID: wacom: remove warning while disconnecting devices
HID: wacom: release the resources before leaving despite devm
HID: whitespace cleanup
HID: multitouch: enable Surface 3 Type Cover Pro to report multitouch data
HID: rmi: Support the Lenovo Thinkpad X1 Tablet dock using hid-rmi
HID: rmi: Handle all Synaptics touchpads using hid-rmi
...
Linus Torvalds [Tue, 21 Feb 2017 00:42:43 +0000 (16:42 -0800)]
Merge tag 'iommu-updates-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU UPDATES from Joerg Roedel:
- KVM PCIe/MSI passthrough support on ARM/ARM64
- introduction of a core representation for individual hardware iommus
- support for IOMMU privileged mappings as supported by some ARM IOMMUS
- 16-bit SID support for ARM-SMMUv2
- stream table optimization for ARM-SMMUv3
- various fixes and other small improvements
* tag 'iommu-updates-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (61 commits)
vfio/type1: Fix error return code in vfio_iommu_type1_attach_group()
iommu: Remove iommu_register_instance interface
iommu/exynos: Make use of iommu_device_register interface
iommu/mediatek: Make use of iommu_device_register interface
iommu/msm: Make use of iommu_device_register interface
iommu/arm-smmu: Make use of the iommu_register interface
iommu: Add iommu_device_set_fwnode() interface
iommu: Make iommu_device_link/unlink take a struct iommu_device
iommu: Add sysfs bindings for struct iommu_device
iommu: Introduce new 'struct iommu_device'
iommu: Rename struct iommu_device
iommu: Rename iommu_get_instance()
iommu: Fix static checker warning in iommu_insert_device_resv_regions
iommu: Avoid unnecessary assignment of dev->iommu_fwspec
iommu/mediatek: Remove bogus 'select' statements
iommu/dma: Remove bogus dma_supported() implementation
iommu/ipmmu-vmsa: Restrict IOMMU Domain Geometry to 32-bit address space
iommu/vt-d: Don't over-free page table directories
iommu/vt-d: Tylersburg isoch identity map check is done too late.
iommu/vt-d: Fix some macros that are incorrectly specified in intel-iommu
...
Linus Torvalds [Tue, 21 Feb 2017 00:26:57 +0000 (16:26 -0800)]
Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar:
"Misc platform updates: SGI UV4 support additions, intel-mid Merrifield
enhancements and purge of old code"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/platform/UV/NMI: Fix uneccessary kABI breakage
x86/platform/UV: Clean up the NMI code to match current coding style
x86/platform/UV: Ensure uv_system_init is called when necessary
x86/platform/UV: Initialize PCH GPP_D_0 NMI Pin to be NMI source
x86/platform/UV: Verify NMI action is valid, default is standard
x86/platform/UV: Add basic CPU NMI health check
x86/platform/UV: Add Support for UV4 Hubless NMIs
x86/platform/UV: Add Support for UV4 Hubless systems
x86/platform/UV: Clean up the UV APIC code
x86/platform/intel-mid: Move watchdog registration to arch_initcall()
x86/platform/intel-mid: Don't shadow error code of mp_map_gsi_to_irq()
x86/platform/intel-mid: Allocate RTC interrupt for Merrifield
x86/ioapic: Return suitable error code in mp_map_gsi_to_irq()
x86/platform/UV: Fix 2 socket config problem
x86/platform/UV: Fix panic with missing UVsystab support
x86/platform/intel-mid: Enable RTC on Intel Merrifield
x86/platform/intel: Remove PMIC GPIO block support
x86/platform/intel-mid: Make intel_scu_device_register() static
x86/platform/intel-mid: Enable GPIO keys on Merrifield
x86/platform/intel-mid: Get rid of duplication of IPC handler
...
Linus Torvalds [Mon, 20 Feb 2017 23:57:19 +0000 (15:57 -0800)]
Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
"A laundry list of changes: KASAN improvements/fixes for ptdump, a
self-test fix, PAT cleanup and wbinvd() avoidance, removal of stale
code and documentation updates"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/ptdump: Add address marker for KASAN shadow region
x86/mm/ptdump: Optimize check for W+X mappings for CONFIG_KASAN=y
x86/mm/pat: Use rb_entry()
x86/mpx: Re-add MPX to selftests Makefile
x86/mm: Remove CONFIG_DEBUG_NX_TEST
x86/mm/cpa: Avoid wbinvd() for PREEMPT
x86/mm: Improve documentation for low-level device I/O functions
Linus Torvalds [Mon, 20 Feb 2017 23:30:51 +0000 (15:30 -0800)]
Merge branch 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode updates from Ingo Molnar:
"The main changes are further simplification and unification of the
code between the AMD and Intel microcode loaders, plus other
simplifications - by Borislav Petkov"
* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Remove struct cont_desc.eq_id
x86/microcode/AMD: Remove AP scanning optimization
x86/microcode/AMD: Simplify saving from initrd
x86/microcode/AMD: Unify load_ucode_amd_ap()
x86/microcode/AMD: Check patch level only on the BSP
x86/microcode: Remove local vendor variable
x86/microcode/AMD: Use find_microcode_in_initrd()
x86/microcode/AMD: Get rid of global this_equiv_id
x86/microcode: Decrease CPUID use
x86/microcode/AMD: Rework container parsing
x86/microcode/AMD: Extend the container struct
x86/microcode/AMD: Shorten function parameter's name
x86/microcode/AMD: Clean up find_equiv_id()
x86/microcode: Convert to bare minimum MSR accessors
x86/MSR: Carve out bare minimum accessors
Linus Torvalds [Mon, 20 Feb 2017 23:03:51 +0000 (15:03 -0800)]
Merge branch 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Ingo Molnar:
"The main changes relate to fixes between (lack of) CPUID and FPU
detection that should only affect old or weird CPUs, by Andy
Lutomirski"
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Fix the "Giving up, no FPU found" test
x86/fpu: Fix CPUID-less FPU detection
x86/fpu: Fix "x86/fpu: Legacy x87 FPU detected" message
x86/cpu: Re-apply forced caps every time CPU caps are re-read
x86/cpu: Factor out application of forced CPU caps
x86/cpu: Add X86_FEATURE_CPUID
x86/fpu/xstate: Move XSAVES state init to a function
Linus Torvalds [Mon, 20 Feb 2017 22:37:08 +0000 (14:37 -0800)]
Merge branch 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpufeature updates from Ingo Molnar:
"The main changes in this cycle were related to enable ring-3
MONITOR/MWAIT instructions support on supported CPUs, by Grzegorz
Andrejczuk and Piotr Luc"
* 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpufeature: Move RING3MWAIT feature to avoid conflicts
x86/cpufeature: Enable RING3MWAIT for Knights Mill
x86/cpufeature: Enable RING3MWAIT for Knights Landing
x86/cpufeature: Add RING3MWAIT to CPU features
x86/elf: Add HWCAP2 to expose ring 3 MONITOR/MWAIT
x86/msr: Add MSR_MISC_FEATURE_ENABLES and RING3MWAIT bit
x86/cpufeature: Add AVX512_VPOPCNTDQ feature
Linus Torvalds [Mon, 20 Feb 2017 22:34:23 +0000 (14:34 -0800)]
Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Two small cleanups"
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/traps: Get rid of unnecessary preempt_disable/preempt_enable_no_resched
x86/pci-calgary: Fix iommu_free() comparison of unsigned expression >= 0
Linus Torvalds [Mon, 20 Feb 2017 22:04:37 +0000 (14:04 -0800)]
Merge branch 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
"Misc updates:
- fix e820 error handling
- convert page table setup code from assembly to C
- fix kexec environment bug
- ... plus small cleanups"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kconfig: Remove misleading note regarding hibernation and KASLR
x86/boot: Fix KASLR and memmap= collision
x86/e820/32: Fix e820_search_gap() error handling on x86-32
x86/boot/32: Convert the 32-bit pgtable setup code from assembly to C
x86/e820: Make e820_search_gap() static and remove unused variables
projects / linux.git / log