drm: Add fake controlD* symlinks for backwards compat
Since then Keith has also added real control nodes with a
proper&useable uapi in the form of drm leases.
It's time to remove the control node leftovers.
Cc: Keith Packard <keithp@keithp.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Link: https://patchwork.freedesktop.org/patch/msgid/20180420065159.4531-1-daniel.vetter@ffwll.ch
Ville Syrjälä [Thu, 26 Apr 2018 14:16:31 +0000 (17:16 +0300)]
drm/rect: Fix drm_rect_rotation_inv() docs
An overeager sed has corrupted the drm_rect_rotation_inv()
documentation. Fix it up.
Looks like it wasn't entirely correct before the sed fail
either. We were missing _rect_ from the function names, which
also explains why the sed hit these by accident.
Linus Walleij [Wed, 2 May 2018 13:47:19 +0000 (15:47 +0200)]
drm/pl111: Enable device-specific assigned memory
The Versatile Express has 8 MB of dedicated video RAM (VRAM)
on the motherboard, which is what we should be using for the
PL111 if available. On this platform, the memory backplane
is constructed so that only this memory will work properly
with the CLCD on the motherboard, using any other memory
area just gives random snow on the display.
The CA9 Versatile Express also has a PL111 instance on its
core tile that can address all memory, and this does not
have the restriction.
The memory is assigned to the device using the memory-region
device tree property and a "shared-dma-pool" reserved
memory pool like this:
Linus Walleij [Wed, 2 May 2018 13:47:18 +0000 (15:47 +0200)]
drm/pl111: Support the Versatile Express
The Versatile Express uses a special configuration controller
deeply embedded in the system motherboard FPGA to multiplex the
two to three (!) display controller instances out to the single
SiI9022 bridge.
Set up an extra file with the logic to probe to the FPGA mux
register on the system controller bus, then parse the device
tree to see if there is a CLCD or HDLCD instance on the core
tile (also known as the daughterboard) by looking in the
root of the device tree for compatible nodes.
- If there is a HDLCD on the core tile, and there is a driver
for it, we exit probe and deactivate the motherboard CLCD.
We do not touch the DVI mux in this case, to make sure we
don't break HDLCD.
- If there is a CLCD on both the motherboard and the core tile
(only the CA9 has this) the core tile CLCD takes precedence
and get muxed to the DVI connector.
- Only if there is no working graphics on the core tile, the
motherboard CLCD is probed and muxed to the DVI connector.
Core tile graphics should always take precedence as it can
address all memory and is also faster, however the motherboard
CLCD is good to have around for diagnostics and testing.
It is possible to test the motherboard CLCD by setting the
status = "disabled" property on the core tile CLCD or
HDLCD.
Scale down the Versatile Express to 16BPP so we can support a
1024x768 display despite the bus bandwidth restrictions on this
platform. (The motherboard CLCD supports slightly lower
resolution.)
Blending win0 with the background color doesn't seem to work
correctly. We only get the background color, no matter the contents of
the win0 framebuffer. However, blending pre-multiplied color with the
default opaque black default background color is a no-op, so we can
just disable blending to get the correct result.
Sparse complains with following warning:
drivers/gpu/drm/vc4/vc4_v3d.c:222:1: warning: symbol
'vc4_allocate_bin_bo' was not declared. Should it be static?
Make vc4_allocate_bin static as it is not used outside of
vc4_v3d.c.
Tom Callaway [Mon, 23 Apr 2018 16:16:39 +0000 (12:16 -0400)]
drm/tinydrm/mi0283qt: Always set rotation value
The PiTFT (ili9340) has a hardware reset circuit that resets only
on power-on and not on each reboot through a gpio like the
rpi-display does. As a result, we need to always apply the
rotation value regardless of the display "on/off" state.
Moved the rotation setting code below out_enable:.
drm/dp: Rename the edp_sdp_header as dp_sdp_header
No functional changes in this patch.
The SDP Header is a generic header for secondary data packets for
both eDP and DP so call it dp_sdp_header. This header gets used for
different SDP types already defined.
Also header bytes 2 and 3 are secondary data packet specific header bytes.
So change the comment to indicate the same.
Philippe CORNU [Tue, 17 Apr 2018 11:40:26 +0000 (13:40 +0200)]
drm/stm: ltdc: add mode_valid()
Add mode_valid() function to filter modes according to available
pll clock values and "preferred" modes. It is particularly
useful for hdmi modes that require precise pixel clocks.
Note that "preferred" modes are always accepted:
- this is important for panels because panel clock tolerances are
bigger than hdmi ones and there is no reason to not accept them
(the fps may vary a little but it is not a problem).
- the hdmi preferred mode will be accepted too, but userland will
be able to use others hdmi "valid" modes if necessary.
Philippe CORNU [Tue, 17 Apr 2018 11:34:41 +0000 (13:34 +0200)]
drm/stm: ltdc: fix deferred endpoint management
When a driver related to one of the endpoints is deferred
due to probe dependencies (i2c, spi...) but the other one
is ready, ltdc probe continues and the deferred driver
will never be probed again.
The fix consists in waiting for all deferred endpoints before
continuing the ltdc probe.
qxl: hook monitors_config updates into crtc, not encoder.
The encoder callbacks are only called in case the video mode changes.
So any layout changes without mode changes will go unnoticed.
Add qxl_crtc_update_monitors_config(), based on the old
qxl_write_monitors_config_for_encoder() function. Hook it into the
enable, disable and flush atomic crtc callbacks. Remove monitors_config
updates from all other places.
qxl_io_log() sends messages over to the host (qemu) for logging.
Remove the function and all callers, we can just use standard
DRM_DEBUG calls (and if needed a serial console).
Philippe CORNU [Thu, 25 Jan 2018 15:55:04 +0000 (16:55 +0100)]
drm/bridge/synopsys: dsi: use adjusted_mode in mode_set
The "adjusted_mode" clock value (ie the real pixel clock) is more
accurate than "mode" clock value (ie the panel/bridge requested
clock value). It offers a better preciseness for timing
computations and allows to reduce the extra dsi bandwidth in
burst mode (from ~20% to ~10-12%, hw platform dependent).
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
drm/gma500: fix psb_intel_lvds_mode_valid()'s return type
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method, psb_intel_lvds_mode_valid(), uses an 'int' for it.
Fix this by using 'enum drm_mode_status' for psb_intel_lvds_mode_valid().
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
drm/bridge: tc358767: fix mode_valid's return type
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Kieran Bingham [Tue, 13 Feb 2018 17:48:57 +0000 (17:48 +0000)]
drm: adv7511: Add support for i2c_new_secondary_device
The ADV7511 has four 256-byte maps that can be accessed via the main I2C
ports. Each map has it own I2C address and acts as a standard slave
device on the I2C bus.
Allow a device tree node to override the default addresses so that
address conflicts with other devices on the same bus may be resolved at
the board description level.
Kieran Bingham [Tue, 13 Feb 2018 17:48:54 +0000 (17:48 +0000)]
dt-bindings: adv7511: Extend bindings to allow specifying slave map addresses
The ADV7511 has four 256-byte maps that can be accessed via the main I2C
ports. Each map has it own I2C address and acts as a standard slave
device on the I2C bus.
Extend the device tree node bindings to be able to override the default
addresses so that address conflicts with other devices on the same bus
may be resolved at the board description level.
Daniel Vetter [Thu, 5 Apr 2018 15:44:46 +0000 (17:44 +0200)]
drm/atomic: better doc for implicit vs explicit fencing
Note that a pile of drivers don't seem to take implicit fencing into
account, or at least don't call drm_atoimc_set_fence_for_plane().
Cc'ing relevant people, or at least some. Some drivers also look like
they don't disable implicit fencing (e.g. amdgpu) because the explicit
fences and implicit fences are handled by entirely independent code
paths.
I also wonder whether we shouldn't just make the recommended helpers
the default ones, since a lot of drivers don't bother to handle the
implicit fences at all it seems. The helpers won't blow up even for
non-GEM drivers or GEM drivers which don't fill out the gem bo
pointers in struct drm_framebuffer.
v2: Comments from Eric.
Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-7-daniel.vetter@ffwll.ch
Hans de Goede [Wed, 18 Apr 2018 12:36:42 +0000 (14:36 +0200)]
drm: panel-orientation-quirks: Add quirk for Lenovo Ideapad Mixx 320
The Lenovo Ideapad Mixx 320 laptop uses a portrait LCD panel, add a
quirk for this.
While at it instead of duplicating the same drm_dmi_panel_orientation_data
for 3 laptops add a generic lcd800x1280_rightside_up orientation_data and
use that for all 3 (including the new Mixx 320 entry).
Tomasz Figa [Mon, 23 Apr 2018 10:50:03 +0000 (12:50 +0200)]
drm/rockchip: psr: Remove flush by CRTC
It is not used anymore after last changes and it was not even correct to
begin with as it assumed a 1:1 relation between a CRTC and encoder,
while in fact a CRTC can be attached to multiple encoders.
Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-28-enric.balletbo@collabora.com
Tomasz Figa [Mon, 23 Apr 2018 10:50:02 +0000 (12:50 +0200)]
drm/rockchip: Disallow PSR for the whole atomic commit
Currently PSR flush is triggered from CRTC's .atomic_begin() callback,
which is executed after modeset disables and enables and before plane
updates are committed. Since PSR flush and re-enable can be triggered
asynchronously by external sources (input event, delayed work), it can
race with hardware programming done in the aforementioned stages.
This patch blocks the PSR completely before hardware programming part
begins and unblock after it ends. This relies on reference counted PSR
disable introduced with previous patch.
Cc: Kristian H. Kristensen <hoegsberg@chromium.org> Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-27-enric.balletbo@collabora.com
Tomasz Figa [Mon, 23 Apr 2018 10:50:01 +0000 (12:50 +0200)]
drm/rockchip: psr: Sanitize semantics of allow/inhibit API
Currently both rockchip_drm_psr_activate() and _deactivate() only set the
boolean "active" flag without actually making sure that hardware state
complies with it.
Since we are going to extend the usage of this API to properly lock PSR
for the duration of atomic commits, we change the semantics in following
way:
- a counter is used to track the number of inhibit requests,
- PSR is actually disabled in hardware on first inhibit request,
- PSR enable work is scheduled on last allow request.
The above allows using the API as a way to deterministically synchronize
PSR state changes with other DRM events, i.e. atomic commits and cursor
updates. As a nice side effect, the naming is sorted out and we have
"inhibit" for stopping the software logic and "enable" for hardware
state.
Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-26-enric.balletbo@collabora.com
Tomasz Figa [Mon, 23 Apr 2018 10:50:00 +0000 (12:50 +0200)]
drm/rockchip: psr: Avoid redundant calls to .set() callback
The first time after we call rockchip_drm_do_flush() after
rockchip_drm_psr_register(), we go from PSR_DISABLE to PSR_FLUSH. The
difference between PSR_DISABLE and PSR_FLUSH is whether or not we have a
delayed work pending - PSR is off in either state. However
psr_set_state() only catches the transition from PSR_FLUSH to
PSR_DISABLE (which never happens), while going from PSR_DISABLE to
PSR_FLUSH triggers a call to psr->set() to disable PSR while it's
already disabled. This triggers the eDP PHY power-on sequence without
being shut down first and this seems to occasionally leave the encoder
unable to later enable PSR. Let's just simplify the state machine and
simply consider PSR_DISABLE and PSR_FLUSH the same state.
Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-25-enric.balletbo@collabora.com
Tomasz Figa [Mon, 23 Apr 2018 10:49:59 +0000 (12:49 +0200)]
drm/rockchip: analogix_dp: Do not call Analogix code before bind
Driver callbacks, such as system suspend or resume can be called any
time, specifically they can be called before the component bind
callback. Let's use dp->adp pointer as a safeguard and skip calling
Analogix entry points if it is an ERR_PTR().
Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-24-enric.balletbo@collabora.com
Douglas Anderson [Mon, 23 Apr 2018 10:49:58 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Split the platform-specific poweron in two parts
Some of the platform-specific stuff in rockchip_dp_poweron() needs to
happen before the generic code. Some needs to happen after. Let's
split the callback in two.
Specifically we can't start doing PSR work until _after_ the whole
controller is up, so don't set the enable until the end.
Cc: Kristian H. Kristensen <hoegsberg@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org>
[seanpaul added exynos change] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-23-enric.balletbo@collabora.com
Mark Yao [Mon, 23 Apr 2018 10:49:57 +0000 (12:49 +0200)]
drm/rockchip: pre dither down when output bpc is 8bit
Some encoder have a crc verification check, crc check fail if
input and output data is not equal.
That means encoder input and output need use same color depth,
vop can output 10bit data to encoder, but some panel only support
8bit depth, that would make crc check die.
So pre dither down vop data to 8bit if panel's bpc is 8.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
[seanpaul resolved conflict in rockchip_drm_vop.c] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-22-enric.balletbo@collabora.com
Douglas Anderson [Mon, 23 Apr 2018 10:49:56 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Properly disable aux chan retries on rockchip
The comments in analogix_dp_init_aux() claim that we're disabling aux
channel retries, but then right below it for Rockchip it sets them to
3. If we actually need 3 retries for Rockchip then we could adjust
the comment, but it seems more likely that we want the same retry
behavior across all platforms.
Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: 征增 王 <wzz@rock-chips.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-21-enric.balletbo@collabora.com
Douglas Anderson [Mon, 23 Apr 2018 10:49:55 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Properly log AUX CH errors
The code in analogix_dp_transfer() that was supposed to print out:
AUX CH error happened
Was actually dead code. That's because the previous check (whether
the interrupt status indicated any errors) would have hit for all
errors anyway.
Let's combine the two error checks so we can actually see AUX CH
errors. We'll also downgrade the message to a warning since some of
these types of errors might be expected for some displays. If this
gets too noisy we can downgrade again to debug.
Cc: 征增 王 <wzz@rock-chips.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-20-enric.balletbo@collabora.com
Douglas Anderson [Mon, 23 Apr 2018 10:49:54 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Reorder plat_data->power_off to happen sooner
The current user of the analogix power_off is "analogix_dp-rockchip".
That driver does this:
- deactivate PSR
- turn off a clock
Both of these things (especially deactive PSR) should be done before
we turn the PHY power off and turn off analog power. Let's move the
callback up.
Note that without this patch (and with
https://patchwork.kernel.org/patch/9553349/ [seanpaul: this patch was
not applied, but it seems like the race can still occur]), I experienced
an error in reboot testing where one thread was at:
The flush handler thread was finding AUX channel errors and eventually
reported "Failed to apply PSR", where I had a kgdb breakpoint. Presumably
the device would have eventually given up and shut down anyway, but it
seems better to fix the order to be more correct.
Cc: Kristian H. Kristensen <hoegsberg@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-19-enric.balletbo@collabora.com
zain wang [Mon, 23 Apr 2018 10:49:53 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Move fast link training detect to set_bridge
It's too early to detect fast link training, if other step after it
failed, we will set fast_link flag to 1, and retry set_bridge again. In
this case we will power down and power up panel power supply, and we
will do fast link training since we have set fast_link flag to 1. In
fact, we should do full link training now, not the fast link training.
So we should move the fast link detection at the end of set_bridge.
Cc: Tomasz Figa <tfiga@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-18-enric.balletbo@collabora.com
zain wang [Mon, 23 Apr 2018 10:49:52 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Fix incorrect operations with register ANALOGIX_DP_FUNC_EN_1
Register ANALOGIX_DP_FUNC_EN_1(offset 0x18), Rockchip is different to
Exynos:
on Exynos edp phy,
BIT 7 MASTER_VID_FUNC_EN_N
BIT 6 reserved
BIT 5 SLAVE_VID_FUNC_EN_N
on Rockchip edp phy,
BIT 7 reserved
BIT 6 RK_VID_CAP_FUNC_EN_N
BIT 5 RK_VID_FIFO_FUNC_EN_N
So, we should do some private operations to Rockchip.
Cc: Tomasz Figa <tfiga@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-17-enric.balletbo@collabora.com
zain wang [Mon, 23 Apr 2018 10:49:51 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Fix timeout of video streamclk config
The STRM_VALID bit in register ANALOGIX_DP_SYS_CTL_3 may be unstable,
so we may hit the error log "Timeout of video streamclk ok" since
checked this unstable bit.
In fact, we can go continue and the streamclk is ok if we wait enough time,
it does no effect on display.
Let's change this error to warn.
Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-16-enric.balletbo@collabora.com
zain wang [Mon, 23 Apr 2018 10:49:50 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Don't use ANALOGIX_DP_PLL_CTL to control pll
There is no register named ANALOGIX_DP_PLL_CTL in Rockchip edp phy reg
list. We should use BIT_4 in ANALOGIX_DP_PD to control the pll power
instead of ANALOGIX_DP_PLL_CTL.
Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-15-enric.balletbo@collabora.com
zain wang [Mon, 23 Apr 2018 10:49:49 +0000 (12:49 +0200)]
drm/rockchip: Restore psr->state when enable/disable psr failed
If we failed disable psr, it would hang the display until next psr
cycle coming. So we should restore psr->state when it failed.
Cc: Tomasz Figa <tfiga@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-14-enric.balletbo@collabora.com
Lin Huang [Mon, 23 Apr 2018 10:49:48 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Reset aux channel if an error occurred
AUX errors are caused by many different reasons. We may not know what
happened in aux channel on failure, so let's reset aux channel if some
errors occurred.
Cc: 征增 王 <wzz@rock-chips.com> Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-13-enric.balletbo@collabora.com
zain wang [Mon, 23 Apr 2018 10:49:47 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Fix AUX_PD bit for Rockchip
There are some different bits between Rockchip and Exynos in register
"AUX_PD". This patch fixes the incorrect operations about it.
Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-12-enric.balletbo@collabora.com
Lin Huang [Mon, 23 Apr 2018 10:49:46 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Check dpcd write/read status
We need to check the dpcd write/read return value to see whether the
write/read was successful
Cc: Kristian H. Kristensen <hoegsberg@chromium.org> Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-11-enric.balletbo@collabora.com
zain wang [Mon, 23 Apr 2018 10:49:45 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Fix incorrect usage of enhanced mode
Enhanced mode is required by the eDP 1.2 specification, and not doing it
early could result in a period of time where we have a link transmitting
idle packets without it. Since there is no reason to disable it, we just
enable it at the beginning of link training and then keep it on all the
time.
Cc: Tomasz Figa <tfiga@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-10-enric.balletbo@collabora.com
zain wang [Mon, 23 Apr 2018 10:49:41 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Wait for HPD signal before configuring link
According to DP spec v1.3 chap 3.5.1.2 Link Training, Link Policy Maker
must first detect that the HPD signal is asserted high by the Downstream
Device before establishing a link with it.
Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-6-enric.balletbo@collabora.com
zain wang [Mon, 23 Apr 2018 10:49:39 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Don't use fast link training when panel just powered up
Panel would reset its setting when it powers down. It would forget the last
succeeded link training setting. So we can't use the last successful link
training setting to do fast link training. Let's reset fast_train_enable in
analogix_dp_bridge_disable();
Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-4-enric.balletbo@collabora.com
Lin Huang [Mon, 23 Apr 2018 10:49:37 +0000 (12:49 +0200)]
drm/bridge: analogix_dp: Move enable video into config_video()
We need to enable video before analogix_dp_is_video_stream_on(), so
we can get the right video stream status.
We needed to increase the delay in the timeout loop because there is
random "Timeout of video streamclk ok" message happen when debug edp
panel, this time do not define in the spec.
Cc: 征增 王 <wzz@rock-chips.com> Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-2-enric.balletbo@collabora.com
Stefan Schake [Fri, 20 Apr 2018 12:25:44 +0000 (05:25 -0700)]
drm/vc4: Add CTM support
The hardware has a single block for applying a CTM prior to gamma lut.
It can be fed with pixels from one of our CRTC at a time and uses a
matrix with S0.9 scalars. Use private atomic state to reject attempts
from userland to apply CTM for more than one CRTC at a time and reject
matrices with scalars that we can't approximate without integer bits.
Signed-off-by: Stefan Schake <stschake@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/218067/
Stefan Schake [Sat, 21 Apr 2018 00:09:54 +0000 (17:09 -0700)]
drm/vc4: Add support for plane alpha
The HVS supports mixing fixed alpha with per-pixel alpha or
setting a fixed plane alpha in case there is no per-pixel information.
This allows us to support the generic DRM plane alpha property.
Boris Brezillon [Sat, 21 Apr 2018 07:08:45 +0000 (09:08 +0200)]
drm/bridge: Add Cadence DSI driver
Add a driver for Cadence DPI -> DSI bridge.
This driver only support a subset of Cadence DSI bridge capabilities.
This driver has been tested/debugged in a simulated environment which
explains why some of the features are missing. Here is a
non-exhaustive list of missing features:
* burst mode
* DPHY init/configuration steps
* support for additional input interfaces (SDI input)
DSI commands and non-burst video mode have been tested.
Philippe CORNU [Tue, 10 Apr 2018 13:53:12 +0000 (15:53 +0200)]
drm/stm: ltdc: fix warning in ltdc_crtc_update_clut()
Fix the warning
"warn: variable dereferenced before check 'crtc' (see line 390)"
by removing unnecessary checks as ltdc_crtc_update_clut() is
only called from ltdc_crtc_atomic_flush() where crtc and
crtc->state are not NULL.
Many thanks to Dan Carpenter for the bug report
https://lists.freedesktop.org/archives/dri-devel/2018-February/166918.html
drm: gem_cma_helper.c: Allow importing of contiguous scatterlists with nents > 1
Without this the following pipeline didn't work:
domU:
1. xen-front allocates a non-contig buffer
2. creates grants out of it
dom0:
3. converts the grants into a dma-buf. Since they're non-contig, the
scatter-list is huge.
4. imports it into rcar-du, which requires dma-contig memory for
scanout.
-> On this given platform there's an IOMMU, so in theory this should
work. But in practice this failed, because of the huge number of sg
entries, even though the IOMMU driver mapped it all into a dma-contig
range.
With a guest-contig buffer allocated in step 1, this problem doesn't
exist. But there's technically no reason to require guest-contig
memory for xen buffer sharing using grants.
Given all that, the xen-front cma support is not needed and should be
removed.
Gustavo Padovan [Fri, 30 Mar 2018 08:54:45 +0000 (10:54 +0200)]
drm/vc4: update cursors asynchronously through atomic
Add support for async updates of cursors by using the new atomic
interface for that. Basically what this commit does is do what
vc4_update_plane() did but through atomic.
v7: Place the drm_atomic_set_fb_for_plane() call after the new
FB has been applied to the HW to avoid possible use-after-free
issues
v6: add missing drm_atomic_set_fb_for_plane() in
vc4_plane_atomic_async_update() (Boris Brezillon)
v5: add missing call to vc4_plane_atomic_check() (Eric Anholt)
v4: add drm_atomic_helper_async() commit (Eric Anholt)
v3: move size checks back to drivers (Ville Syrjälä)
v2: move fb setting to core and use new state (Eric Anholt)
Stefan Schake [Wed, 11 Apr 2018 20:49:13 +0000 (22:49 +0200)]
drm/vc4: Expose gamma as atomic property
We are an atomic driver so the gamma LUT should also be exposed as a
CRTC property through the DRM atomic color management. This will also
take care of the legacy path for us.
Eric Anholt [Wed, 11 Apr 2018 20:49:12 +0000 (22:49 +0200)]
drm/vc4: Add some missing HVS register definitions.
At least the RGBA expand field we should have been setting, because we
aren't expanding correctly for 565 -> 8888. Other registers are ones
that may be interesting for various projects that have been discussed.
Maxime Ripard [Wed, 11 Apr 2018 07:39:29 +0000 (09:39 +0200)]
drm/docs: Remove the rcar alpha from the csv file
Now that we moved the rcar-du DRM driver has been switched to the generic
alpha property, remove the former property documentation from the
deprecated CSV file.
projects / linux.git / log