Ben Skeggs [Tue, 11 Dec 2018 04:50:02 +0000 (14:50 +1000)]
drm/nouveau/fault/tu104: initial support
New registers.
Currently uncertain how exactly to mask fault buffer interrupts. This will
likely be corrected at around the same time as the new MC interrupt stuff
has been properly figured out and implemented.
Ben Skeggs [Tue, 11 Dec 2018 04:50:02 +0000 (14:50 +1000)]
drm/nouveau/fifo/gv100: allocate method buffer
The GPU saves off some stuff to the address specified in this part of RAMFC
when the channel faults, so we should probably point it at a valid address.
Ben Skeggs [Tue, 11 Dec 2018 04:50:02 +0000 (14:50 +1000)]
drm/nouveau/fault: add explicit control over fault buffer interrupts
The GPU will continually fire interrupts while a fault buffer GET != PUT,
and to stop the spurious interrupts while the handler does its thing, we
were disabling the fault buffer temporarily.
This is not actually a great idea to begin with, and made worse by Volta
resetting GET/PUT when it's reactivated. So, let's not do that.
Lyude Paul [Thu, 15 Nov 2018 01:39:51 +0000 (20:39 -0500)]
drm/nouveau/drm/nouveau: Check rc from drm_dp_mst_topology_mgr_resume()
We need to actually make sure we check this on resume since otherwise we
won't know whether or not the topology is still there once we've
resumed, which will cause us to still think the topology is connected
even after it's been removed if the removal happens mid-suspend.
Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Dave Airlie [Fri, 7 Dec 2018 00:46:29 +0000 (10:46 +1000)]
Merge tag 'drm-misc-next-2018-12-06' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Final changes to drm-misc-next for v4.21:
UAPI Changes:
Core Changes:
- Add dma_fence_get_stub to dma-buf, and use it in drm/syncobj.
- Add and use DRM_MODESET_LOCK_BEGIN/END helpers.
- Small fixes to drm_atomic_helper_resume(), drm_mode_setcrtc() and
drm_atomic_helper_commit_duplicated_state()
- Fix drm_atomic_state_helper.[c] extraction.
Driver Changes:
- Small fixes to tinydrm, vkms, meson, rcar-du, virtio, vkms,
v3d, and pl111.
- vc4: Allow scaling and YUV formats on cursor planes.
- v3d: Enable use of the Texture Formatting Unit, and fix
prime imports of buffers from other drivers.
- Add support for the AUO G101EVN010 panel.
- sun4i: Enable support for the H6 display engine.
Dave Airlie [Thu, 6 Dec 2018 03:29:34 +0000 (13:29 +1000)]
Merge tag 'exynos-drm-next-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
- Refactoring of DMA and IOMMU code
. This patch series simplifies DMA mapping creation by avoiding looping
all components to get dma device object, reduces code size by merging
IOMMU and DMA code.
- Enhance plane alpha and blend mode support
. This patch series adds configurable plane and pixel blend mode support
for Exynos5433 DECON device.
- Fix color format setting of Mixer driver
. This patch series fixes color format and range setting by splitting
range and format.
Dave Airlie [Thu, 6 Dec 2018 03:28:19 +0000 (13:28 +1000)]
Merge branch 'drm-next-4.21' of git://people.freedesktop.org/~agd5f/linux into drm-next
amdgpu and amdkfd:
- Freesync support
- ABM support in DC
- KFD support for vega12 and polaris12
- Add sdma paging queue support for vega
- Use ACPI to query backlight range on supported platforms
- Clean up doorbell handling
- KFD fix for pasid handling under non-HWS
- Misc cleanups and fixes
The whole interface isn't thought through. Since this function can't
fail we actually can't allocate an object to store the sync point.
Sorry, I should have taken the lead on this from the very beginning and
reviewed it more thoughtfully. Going to propose a new interface as a
follow up change.
YueHaibing [Fri, 5 Oct 2018 11:36:58 +0000 (11:36 +0000)]
drm/vmwgfx: Remove set but not used variable 'file_priv'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/vmwgfx/vmwgfx_fence.c: In function 'vmw_event_fence_action_seq_passed':
drivers/gpu/drm/vmwgfx/vmwgfx_fence.c:909:19: warning:
variable 'file_priv' set but not used [-Wunused-but-set-variable]
struct drm_file *file_priv;
It not used any more since
commit fb740cf2492c ("drm: Create drm_send_event helpers")
Colin Ian King [Thu, 4 Oct 2018 17:49:53 +0000 (18:49 +0100)]
drm/vmwgfx: remove redundant return ret statement
The return statement is redundant as there is a return statement
immediately before it so we have dead code that can be removed.
Also remove the unused declaration of ret.
Detected by CoverityScan, CID#1473793 ("Structurally dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Thomas Hellstrom [Mon, 12 Nov 2018 14:46:39 +0000 (15:46 +0100)]
drm/vmwgfx: Fix a layout race condition
This fixes a layout update race condition. We make sure
the crtc mutex is locked before we dereference crtc->state. Otherwise the
state might change under us.
Since now we're already holding the crtc mutexes when reading the gui
coordinates, protect them with the crtc mutexes rather than with the
requested_layout mutex.
With kernel commit "drm/modes: Kill off the oddball DRM_MODE_TYPE_CRTC_C
vs. DRM_MODE_TYPE_BUILTIN handling", no need to clear mode::type for
user-space bug.
Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
drm/vmwgfx: Use atomic helper function for dirty fb IOCTL
USe new atomic helper for dirty fb IOCTL which make use of damage
interface. Note that this is only done for STDU and SOU, for legacy
display unit still using old interface.
Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
drm/vmwgfx: Add a new interface for plane update on a display unit
Add a new struct vmw_du_update_plane similar to vmw_kms_dirty which
represent the flow of operations needed to update a display unit from
surface or bo (blit a new framebuffer).
v2:
- Kernel doc correction.
- Rebase.
v3: Rebase to new resource validation.
Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Rob Clark [Thu, 31 May 2018 00:46:20 +0000 (17:46 -0700)]
drm: Add helper to implement legacy dirtyfb
Add an atomic helper to implement dirtyfb support. This is needed to
support DSI command-mode panels with x11 userspace (ie. when we can't
rely on pageflips to trigger a flush to the panel).
v2: Modified the helper to use plane fb_damage_clips property and
removed plane_state::dirty flag.
v3:
- Use uapi drm_mode_rect.
- Support annotate flags.
v4: Correct kernel doc.
Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Deepak Rawat [Wed, 30 May 2018 21:42:52 +0000 (14:42 -0700)]
drm: Add helper iterator functions for plane fb_damage_clips blob
With fb_damage_clips blob property in drm_plane_state, this patch adds
helper iterator to traverse the damage clips that lie inside plane src.
Iterator will return full plane src as damage in case need full plane
update or damage is not specified.
v2:
- Plane src clipping correction
- Handle no plane update case in iter_next
Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Lukasz Spintzyk [Thu, 24 May 2018 02:04:08 +0000 (19:04 -0700)]
drm: Add a new plane property to send damage during plane update
FB_DAMAGE_CLIPS is an optional plane property to mark damaged regions
on the plane in framebuffer coordinates of the framebuffer attached to
the plane.
The layout of blob data is simply an array of "struct drm_mode_rect".
Unlike plane src coordinates, damage clips are not in 16.16 fixed point.
As plane src in framebuffer cannot be negative so are damage clips. In
damage clip, x1/y1 are inclusive and x2/y2 are exclusive.
This patch also exports the kernel internal drm_rect to userspace as
drm_mode_rect. This is because "struct drm_clip_rect" is not sufficient
to represent damage for current plane size.
Driver which are interested in enabling FB_DAMAGE_CLIPS property for a
plane should enable this property using drm_plane_enable_damage_clips.
v2:
- Input validation on damage clips against framebuffer size.
- Doc update, other minor changes.
Signed-off-by: Lukasz Spintzyk <lukasz.spintzyk@displaylink.com> Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Color format and color range was set based on resolution. Change that,
by splitting range and format. Leave color format setting as it is,
set color range based on drm_display_mode using
drm_default_quant_range helper function.
Tested on Odroid-U3 with Exynos 4412 CPU, kernel next-20181128
using modetest.
Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Fix color format decision based on height(pixels).
According to CEA-861-E:
"High Definition (HD) - A CE video format that, inclusively, has between
720 to 1080 active vertical lines (Vactive) lines per video frame."
Tested on Odroid-U3 with Exynos 4412 CPU, kernel next-20181128
using modetest.
Signed-off-by: Christoph Manszewski <c.manszewski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
Dave Airlie [Wed, 5 Dec 2018 05:00:09 +0000 (15:00 +1000)]
Merge tag 'imx-drm-next-2018-12-03' of git://git.pengutronix.de/git/pza/linux into drm-next
drm/imx: update image-convert with fixes for multi-tiled scaling
Update the ipu-v3 mem2mem image-convert code, with some fixes for race
conditions, alignment issues, and visual artifacts due to tile alignment
and scaling factor issues when scaling images larger than hardware
limitations in multiple tiles. This will allow the V4L2 mem2mem scaler
driver to write output images larger than 1024x1024 pixels.
Also switch drm/imx source files to SPDX license identifiers, constify
struct clk_ops in imx-tve, and add a timeout warning to the busy wait in
ipu_plane_disable().
Jani Nikula [Tue, 4 Dec 2018 10:19:26 +0000 (12:19 +0200)]
drm/i915/icl: fix transcoder state readout
Commit 2ca711caeca2 ("drm/i915/icl: Consider DSI for getting transcoder
state") clobbers the previously read TRANS_DDI_FUNC_CTL_EDP register
contents with TRANS_DDI_FUNC_CTL_DSI0 contents. Fix the state readout,
and handle DSI 1 while at it.
Use a bitmask for iterating and logging transcoders, because the allowed
combinations are a bit funky.
Fixes: 2ca711caeca2 ("drm/i915/icl: Consider DSI for getting transcoder state")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108928 Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Madhav Chauhan <madhav.chauhan@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181204101926.17174-1-jani.nikula@intel.com
Chris Wilson [Tue, 4 Dec 2018 14:15:16 +0000 (14:15 +0000)]
drm/i915: Allocate a common scratch page
Currently we allocate a scratch page for each engine, but since we only
ever write into it for post-sync operations, it is not exposed to
userspace nor do we care for coherency. As we then do not care about its
contents, we can use one page for all, reducing our allocations and
avoid complications by not assuming per-engine isolation.
For later use, it simplifies engine initialisation (by removing the
allocation that required struct_mutex!) and means that we can always rely
on there being a scratch page.
v2: Check that we allocated a large enough scratch for I830 w/a
Fixes: 06e562e7f515 ("drm/i915/ringbuffer: Delay after EMIT_INVALIDATE for gen4/gen5") # v4.18.20
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108850 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181204141522.13640-1-chris@chris-wilson.co.uk Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.18.20+
Tvrtko Ursulin [Mon, 3 Dec 2018 12:50:14 +0000 (12:50 +0000)]
drm/i915: Trim unused workaround list entries
The new workaround list allocator grows the list in chunks so will end up
with some unused space. Trim it when the initialization phase is done to
free up a tiny bit of slab.
Tvrtko Ursulin [Mon, 3 Dec 2018 13:33:57 +0000 (13:33 +0000)]
drm/i915: Fuse per-context workaround handling with the common framework
Convert the per context workaround handling code to run against the newly
introduced common workaround framework and fuse the two to use the
existing smarter list add helper, the one which does the sorted insert and
merges registers where possible.
This completes migration of all four classes of workarounds onto the
common framework.
Existing macros are kept untouched for smaller code churn.
v2:
* Rename to list name ctx_wa_list and move from dev_priv to engine.
v3:
* API rename and parameters tweaking. (Chris Wilson)
projects / linux.git / log