Add functions to the atomic core to retrieve the old and new connectors
associated with an encoder in a drm_atomic_state. This is useful for
encoders and bridges that need to access the connector, for instance for
the drm_display_info.
The CRTC associated with the encoder can also be retrieved through the
connector state, and from it, the old and new CRTC states.
Changed in v4:
- Added to the set
Changed in v5:
- Fix up docbook (Daniel & Laurent)
Changed in v6:
- Updated commit subject (Sam)
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-3-sean@poorly.run
Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-3-sean@poorly.run
Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[seanpaul removed WARNs from helpers and added docs to explain why
returning NULL might be valid] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190611205147.181298-1-sean@poorly.run
Sean Paul [Tue, 11 Jun 2019 20:49:53 +0000 (16:49 -0400)]
drm: Add atomic variants of enable/disable to encoder helper funcs
This patch adds atomic_enable and atomic_disable callbacks to the
encoder helpers. This will allow encoders to make informed decisions in
their start-up/shutdown based on the committed state.
Aside from the new hooks, this patch also introduces the new signature
for .atomic_* functions going forward. Instead of passing object state
(well, encoders don't have atomic state, but let's ignore that), we pass
the entire atomic state so the driver can inspect more than what's
happening locally.
This is particularly important for the upcoming self refresh helpers.
Changes in v3:
- Added patch to the set
Changes in v4:
- Move atomic_disable above prepare (Daniel)
- Add breadcrumb to .enable() docbook (Daniel)
Changes in v5:
- None
Changes in v6:
- Tweak kerneldoc some more (Sam)
Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-2-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-2-sean@poorly.run
Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-2-sean@poorly.run
Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190611204959.180855-1-sean@poorly.run
sti: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190613114618.GD13119@kroah.com
drm: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Because there is no need to check these functions, a number of local
functions can be made to return void to simplify things as nothing can
fail.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190613133439.GA6715@kroah.com
Linus Walleij [Sun, 9 Jun 2019 23:13:39 +0000 (01:13 +0200)]
drm/bridge: analogix_dp: Convert to GPIO descriptors
This converts the Analogix display port to use GPIO descriptors
instead of DT-extracted numbers.
Cc: Douglas Anderson <dianders@chromium.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190609231339.22136-1-linus.walleij@linaro.org
Linus Walleij [Sun, 9 Jun 2019 22:32:54 +0000 (00:32 +0200)]
drm/bridge: analogix-anx78xx: Drop of_gpio.h include
This include is only used for some gpio drivers and consumers
that look up GPIO numbers directly from the device tree.
This driver does not use it and only needs <linux/gpio/consumer.h>.
Delete the unused include.
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190609223254.8523-1-linus.walleij@linaro.org
panel: rocktech: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
vga_switcheroo: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Also, because there is no need to save the file dentry, remove the local
variable and just recursively delete the whole directory when shutting
down.
Cc: Lukas Wunner <lukas@wunner.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190613114455.GA13119@kroah.com
The cursor handling in mgag200 is complicated to understand. It touches a
number of different BOs, but doesn't really use all of them.
Rewriting the cursor update reduces the amount of cursor state. There are
two BOs for double-buffered HW updates. The source BO updates the one that
is currently not displayed and then switches buffers. Explicit BO locking
has been removed from the code. BOs are simply pinned and unpinned in video
RAM.
drm/mgag200: Pin framebuffer BO during dirty update
Another explicit lock operation of a GEM VRAM BO is located in mgag200's
framebuffer update code. Instead of locking the BO, we pin it to wherever
it is.
drm/ast: Pin and map cursor source BO during update
The ast driver used to lock the cursor source BO during updates. Locking
should be done internally by the BO's implementation, so we pin it instead
to system memory. The mapping information is also stored in the BO. No
need to have an extra argument to the kmap function.
The ast driver's data structures store unused or uncecessary cursor
state. Most of the cursor state is already stored elsewhere and can
be retrieved when necessary. Remove the obsolete fields and adapt
users accordingly.
drm/gem-vram: Support pinning buffers to current location
Pinning a buffer prevents it from being moved to a different memory
location. For some operations, such as buffer updates, it is not
important where the buffer is located. Setting the pin function's
pl_flag argument to 0 will pin the buffer to whereever it is stored.
I copied the kerneldoc for encoder_funcs.atomic_enable from encoder_funcs.enable
in a recent patch [1]. Sam rightly pointed out in the review that "for symmetry
with" text is awkward [2]. So here's a patch to fix up the source of the awkward
language.
Yannick Fertré [Mon, 27 May 2019 10:21:39 +0000 (12:21 +0200)]
drm/stm: dsi: add power on/off phy ops
These new physical operations are helpful to power_on/off the dsi
wrapper. If the dsi wrapper is powered in video mode, the display
controller (ltdc) register access will hang when DSI fifos are full.
On Rockchip rk3288-based Chromebooks when you do a suspend/resume
cycle:
1. You lose the ability to detect an HDMI device being plugged in.
2. If you're using the i2c bus built in to dw_hdmi then it stops
working.
Let's call the core dw-hdmi's suspend/resume functions to restore
things.
NOTE: in downstream Chrome OS (based on kernel 3.14) we used the
"late/early" versions of suspend/resume because we found that the VOP
was sometimes resuming before dw_hdmi and then calling into us before
we were fully resumed. For now I have gone back to the normal
suspend/resume because I can't reproduce the problems.
On Rockchip rk3288-based Chromebooks when you do a suspend/resume
cycle:
1. You lose the ability to detect an HDMI device being plugged in.
2. If you're using the i2c bus built in to dw_hdmi then it stops
working.
Let's add a hook to the core dw-hdmi driver so that we can call it in
dw_hdmi-rockchip in the next commit.
NOTE: the exact set of steps I've done here in resume come from
looking at the normal dw_hdmi init sequence in upstream Linux plus the
sequence that we did in downstream Chrome OS 3.14. Testing show that
it seems to work, but if an extra step is needed or something here is
not needed we could improve it.
As part of this change we'll refactor the hardware init bits of
dw-hdmi to happen all in one function and all at the same time. Since
we need to init the interrupt mutes before we request the IRQ, this
means moving the hardware init earlier in the function, but there
should be no problems with that. Also as part of this we now
unconditionally init the "i2c" parts of dw-hdmi, but again that ought
to be fine.
Daniel Vetter [Tue, 11 Jun 2019 11:28:59 +0000 (13:28 +0200)]
drm/fb: document dirty helper better
Apparently little known fact that there's no need to hand-roll your own
anymore. Cc'ing a bunch of driver people who might want to know this
too.
v2: s/none/known/ (Chris Wilson)
Cc: Rob Clark <robdclark@gmail.com> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: David Lechner <david@lechnology.com> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190611112859.16375-1-daniel.vetter@ffwll.ch
Noralf Trønnes [Sat, 8 Jun 2019 15:26:53 +0000 (17:26 +0200)]
drm/fb-helper: Remove drm_fb_helper_connector
All drivers add all their connectors so there's no need to keep around an
array of available connectors. Instead we just put the useable (not
writeback) connectors in a temporary array using
drm_client_for_each_connector_iter() everytime we probe the outputs.
Other places where it's necessary to look at the connectors, we just
iterate over them using the same iterator function.
Rename functions which signature is changed since they will be moved to
drm_client in a later patch.
David Riley [Mon, 10 Jun 2019 21:18:10 +0000 (14:18 -0700)]
drm/virtio: Add memory barriers for capset cache.
After data is copied to the cache entry, atomic_set is used indicate
that the data is the entry is valid without appropriate memory barriers.
Similarly the read side was missing the corresponding memory barriers.
Sam Ravnborg [Sun, 9 Jun 2019 22:07:48 +0000 (00:07 +0200)]
drm: fix build errors with drm_print.h
drm_print.h requires <drm/drm.h> to fix build when macros are used.
Pull in the header file in drm_print.h so users do not have to do it.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-2-sam@ravnborg.org
Sam Ravnborg [Sat, 8 Jun 2019 08:02:39 +0000 (10:02 +0200)]
drm/radeon: prepare header files for drmP.h removal
While removing drmP.h from all .c files the list of
header files are also sorted alphabetically.
To allow this adjust the header files to pull in
the dependencies they needed to allow this.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190608080241.4958-6-sam@ravnborg.org
Sam Ravnborg [Sat, 8 Jun 2019 08:02:37 +0000 (10:02 +0200)]
drm/radeon: drop dependency on drm_os_linux.h
The drm_os_linux.h header file is deprecated.
Drop all uses of symbols from this file.
All macros are just opencoded.
A few adjustments to include files was required as the obsolete
drm_os_linux.h included these headers.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190608080241.4958-4-sam@ravnborg.org
Sam Ravnborg [Sat, 8 Jun 2019 08:02:36 +0000 (10:02 +0200)]
drm: drm_debugfs.h self-contained
While removing drmP.h from drm/radeon a few files ended
up including drm_debugfs.h as the first file.
This failed build due to missing dependencies in drm_debugfs.h.
Add the missing include files.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190608080241.4958-3-sam@ravnborg.org
Sam Ravnborg [Sat, 8 Jun 2019 08:02:35 +0000 (10:02 +0200)]
drm: drm_crtc.h self-contained
While removing drmP.h from drm/radeon a few files ended
up including drm_crtc.h as the first file.
This failed build due to a missing dependency in drm_crtc.h.
Add the missing include file.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190608080241.4958-2-sam@ravnborg.org
Douglas Anderson [Mon, 10 Jun 2019 17:52:34 +0000 (10:52 -0700)]
drm/bridge/synopsys: dw-hdmi: Fix unwedge crash when no pinctrl entries
In commit 50f9495efe30 ("drm/bridge/synopsys: dw-hdmi: Add "unwedge"
for ddc bus") I stupidly used IS_ERR() to check for whether we have an
"unwedge" pinctrl state even though on most flows through the driver
the unwedge state will just be NULL.
Fix it so that we consistently use NULL for no unwedge state.
Fixes: 50f9495efe30 ("drm/bridge/synopsys: dw-hdmi: Add "unwedge" for ddc bus") Cc: Douglas Anderson <dianders@chromium.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: Sam Ravnborg <sam@ravnborg.org> Reported-by: Erico Nunes <nunes.erico@gmail.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190610175234.196844-1-dianders@chromium.org
Chris Wilson [Sun, 9 Jun 2019 11:00:02 +0000 (12:00 +0100)]
dma-fence: Signal all callbacks from dma_fence_release()
This is an illegal scenario, to free the fence whilst there are pending
callbacks. Currently, we emit a WARN and then cast aside the callbacks
leaving them dangling. Alternatively, we could set an error on the fence
and then signal fence so that any dependency chains from the fence can
be tidied up, and if they care they can check for the error.
Prepare for moving drm_fb_helper modesetting code to drm_client.
drm_client will be linked to drm.ko, so move
__drm_atomic_helper_disable_plane() and __drm_atomic_helper_set_config()
out of drm_kms_helper.ko.
While at it, fix two checkpatch complaints:
- WARNING: Block comments use a trailing */ on a separate line
- CHECK: Alignment should match open parenthesis
Colin Ian King [Mon, 3 Jun 2019 14:21:02 +0000 (15:21 +0100)]
drm/bridge: sii902x: fix comparision of u32 with less than zero
The less than check for the variable num_lanes is always going to be
false because the variable is a u32. Fix this by making num_lanes an
int and also make loop index i an int too.
Addresses-Coverity: ("Unsigned compared against 0") Fixes: ff5781634c41 ("drm/bridge: sii902x: Implement HDMI audio support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190603142102.27191-1-colin.king@canonical.com
Yannick Fertré [Mon, 3 Jun 2019 08:32:02 +0000 (10:32 +0200)]
drm/stm: support runtime power management
This patch enables runtime power management (runtime PM) support for
the display controller. pm_runtime_enable() and pm_runtime_disable()
are added during ltdc load and unload respectively.
pm_runtime_get_sync() and pm_runtime_put_sync() are added for ltdc
register access.
we fixed the vblank counter to give accurate results outside of
drm_crtc_handle_vblank, which fixed bugs around vblank timestamps
being off-by-one and causing the vblank counter to jump when it
shouldn't.
The trouble is that this completely broke crc generation. Shayenne and
Rodrigo tracked this down to the vblank timestamp going backwards in
time somehow. Which then resulted in an underflow in drm_vblank.c
code, which resulted in all kinds of things breaking really badly.
The reason for this is that once we've called drm_crtc_handle_vblank
and the hrtimer isn't forwarded yet, we're returning a vblank
timestamp in the past. This race is really hard to hit since it's
small, except when you enable crc generation: In that case there's a
call to drm_crtc_accurate_vblank right in-betwen, so we're guaranteed
to hit the bug.
The fix is to roll the hrtimer forward _before_ we do the vblank
processing (which has a side-effect of incrementing the vblank
counter), and we always subtract one frame from the hrtimer - since
now it's always one frame in the future.
To make sure we don't hit this again also add a WARN_ON checking for
whether our timestamp is somehow moving into the past, which is never
should.
This also aligns more with how real hw works:
1. first all registers are updated with the new timestamp/vblank
counter values.
2. then an interrupt is generated
3. kernel interrupt handler eventually fires.
So doing this aligns vkms closer with what drm_vblank.c expects.
Document this also in a comment.
Rodrigo Siqueira [Fri, 15 Mar 2019 16:11:42 +0000 (13:11 -0300)]
drm/vkms: Remove useless call to drm_connector_register/unregister()
The function vkms_output_init() is invoked during the module
initialization, and it handles the creation/configuration of the vkms
essential elements (e.g., connectors, encoder, etc). Among the
initializations, this function tries to initialize a connector and
register it by calling drm_connector_register(). However, inside the
drm_connector_register(), at the beginning of this function there is the
following validation:
if (!connector->dev->registered)
return 0;
In this sense, invoke drm_connector_register() after initializing the
connector has no effect because the register field is false. The
connector register happens when drm_dev_register() is invoked; the same
issue exists with drm_connector_unregister(). Therefore, this commit
removes the unnecessary call to drm_connector_register() and
drm_connector_unregister().
Changes since v2:
* Remove unnecessary call to drm_connector_unregister()
* Remove unused label
Sam Ravnborg [Wed, 5 Jun 2019 13:48:35 +0000 (15:48 +0200)]
drm/sti: drop use of drmP.h
Stop using the deprecated drmP.h header file.
Replaced with relevant forwards or headers files.
Header files sorted in all files touched.
Build tested with allyesconfig, allmodconfig for a number of
architectures.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190605134835.25112-2-sam@ravnborg.org
Ville Syrjälä [Wed, 29 May 2019 11:02:04 +0000 (14:02 +0300)]
drm/edid: Ignore "DFP 1.x" bit for EDID 1.2 and earlier
From VESA EDID implementation guide v1.0:
"For EDID version 1 revision 2 or earlier data structures when offset 14h
bit 7 is set to one, the value of bits 6-0 are undefined, and therefore
cannot be interpreted to mean anything."
And since EDID 1.4 redefines that bit let's consult it only for
EDID 1.3.
Hans de Goede [Fri, 24 May 2019 12:57:59 +0000 (14:57 +0200)]
drm: panel-orientation-quirks: Add quirk for GPD MicroPC
GPD has done it again, make a nice device (good), use way too generic
DMI strings (bad) and use a portrait screen rotated 90 degrees (ugly).
Because of the too generic DMI strings this entry is also doing bios-date
matching, so the gpd_micropc data struct may very well need to be updated
with some extra bios-dates in the future.
Hans de Goede [Fri, 24 May 2019 12:57:58 +0000 (14:57 +0200)]
drm: panel-orientation-quirks: Add quirk for GPD pocket2
GPD has done it again, make a nice device (good), use way too generic
DMI strings (bad) and use a portrait screen rotated 90 degrees (ugly).
Because of the too generic DMI strings this entry is also doing bios-date
matching, so the gpd_pocket2 data struct may very well need to be updated
with some extra bios-dates in the future.
Changes in v2:
-Add one more known BIOS date to the list of BIOS dates
drm: Ignore drm_gem_vram_mm_funcs in generated documentation
The documentation tools interpret drm_gem_vram_mm_funcs as function and
there appears to be no way of inline-documenting constants. This results
in a warning by 'make htmldocs'. For now, removing drm_gem_vram_mm_funcs
from generated documentation works around the issue.
David Riley [Wed, 5 Jun 2019 23:44:22 +0000 (16:44 -0700)]
drm/virtio: Fix cache entry creation race.
virtio_gpu_cmd_get_capset would check for the existence of an entry
under lock. If it was not found, it would unlock and call
virtio_gpu_cmd_get_capset to create a new entry. The new entry would
be added it to the list without checking if it was added by another
task during the period where the lock was not held resulting in
duplicate entries.
Compounding this issue, virtio_gpu_cmd_capset_cb would stop iterating
after find the first matching entry. Multiple callbacks would modify
the first entry, but any subsequent entries and their associated waiters
would eventually timeout since they don't become valid, also wasting
memory along the way.
David Riley [Wed, 5 Jun 2019 23:44:20 +0000 (16:44 -0700)]
drm/virtio: Ensure cached capset entries are valid before copying.
virtio_gpu_get_caps_ioctl could return success with invalid data if a
second caller to the function occurred after the entry was created in
virtio_gpu_cmd_get_capset but prior to the virtio_gpu_cmd_capset_cb
callback being called. This could leak contents of memory as well
since the caps_cache allocation is done without zeroing.
drm/bridge/synopsys: dw-hdmi: Add "unwedge" for ddc bus
See the PhD thesis in the comments in this patch for details, but to
summarize this adds a hacky "unwedge" feature to the dw_hdmi i2c bus to
workaround what appears to be a hardware errata. This relies on a
pinctrl entry to help change around muxing to perform the unwedge.
NOTE that the specific TV this was tested on was the "Samsung
UN40HU6950FXZA" and the specific port was the "STB" port.
dt-bindings: drm/bridge/synopsys: dw-hdmi: Add "unwedge" for ddc bus
In certain situations it was seen that we could wedge up the DDC bus
on the HDMI adapter on rk3288. The only way to unwedge was to mux one
of the pins over to GPIO output-driven-low temporarily and then
quickly mux back. Full details can be found in the patch
("drm/bridge/synopsys: dw-hdmi: Add "unwedge" for ddc bus").
Since unwedge requires remuxing the pins, we first need to add to the
bindings so that we can specify what state the pins should be in for
unwedging.
Chris Wilson [Tue, 4 Jun 2019 12:53:23 +0000 (13:53 +0100)]
dma-buf: Discard old fence_excl on retrying get_fences_rcu for realloc
If we have to drop the seqcount & rcu lock to perform a krealloc, we
have to restart the loop. In doing so, be careful not to lose track of
the already acquired exclusive fence.
Fixes: fedf54132d24 ("dma-buf: Restart reservation_object_get_fences_rcu() after writes") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: stable@vger.kernel.org #v4.10 Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190604125323.21396-1-chris@chris-wilson.co.uk
drm: atmel-hlcdc: avoid initializing cfg with zero
Remove cfg initialization with zero and read state with
drm_crtc_state_to_atmel_hlcdc_crtc_state() so that cfg to be initialized
with state's output_mode.
drm: atmel-hlcdc: add config option for clock selection
SAM9x60 LCD Controller has no option to select clock source as previous
controllers have. To be able to use the same driver even for this LCD
controller add a config option to know if controller supports this.
Chris Wilson [Mon, 3 Jun 2019 13:58:57 +0000 (14:58 +0100)]
drm: Flush output polling on shutdown
We need to mark the output polling as disabled to prevent concurrent
irqs from queuing new work as shutdown the probe -- causing that work to
execute after we have freed the structs:
Uma Shankar [Tue, 4 Jun 2019 11:17:02 +0000 (16:47 +0530)]
drm: Fix docbook warnings in hdr metadata helper structures
Fixes the following warnings:
./include/drm/drm_mode_config.h:841: warning: Incorrect use of
kernel-doc format: * hdr_output_metadata_property: Connector
property containing hdr
./include/drm/drm_mode_config.h:918: warning: Function parameter or member 'hdr_output_metadata_property' not described in 'drm_mode_config'
./include/drm/drm_connector.h:1251: warning: Function parameter or member 'hdr_output_metadata' not described in 'drm_connector'
./include/drm/drm_connector.h:1251: warning: Function parameter or member 'hdr_sink_metadata' not described in 'drm_connector'
Also adds some property documentation for HDR Metadata Connector
Property in connector property create function.
v2: Fixed Sean Paul's review comments.
v3: Fixed Daniel Vetter's review comments, added the UAPI structure
definition section in kernel docs.
v4: Fixed Daniel Vetter's review comments.
v5: Added structure member references as per Daniel's suggestion.
Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Ville Syrjä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: "Ville Syrjä" <ville.syrjala@linux.intel.com> Cc: Hans Verkuil <hansverk@cisco.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Reviewed-by: Sean Paul <sean@poorly.run> (v1) Signed-off-by: Uma Shankar <uma.shankar@intel.com>
[danvet: Fix up markup: () for functions, & for structs. Style guide
also recommends to prepend struct for structures.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1559647022-7336-1-git-send-email-uma.shankar@intel.com
Noralf Trønnes [Fri, 31 May 2019 14:01:11 +0000 (16:01 +0200)]
drm/fb-helper: Remove drm_fb_helper_crtc
struct drm_fb_helper_crtc is now just a wrapper around drm_mode_set so
use that directly instead and attach it as a modeset array onto
drm_client_dev. drm_fb_helper will use this array to store its modesets
which means it will always initialize a drm_client, but it will not
register the client (callbacks) unless it's the generic fbdev emulation.
Code will later be moved to drm_client, so add code there in a new file
drm_client_modeset.c with MIT license to match drm_fb_helper.c.
The modeset connector array size is hardcoded for the cloned case to avoid
having to pass in a value from the driver. A value of 8 is chosen to err
on the safe side. This means that the max connector argument for
drm_fb_helper_init() and drm_fb_helper_fbdev_setup() isn't used anymore,
a todo entry for this is added.
In pan_display_atomic() restore_fbdev_mode_force() is used instead of
restore_fbdev_mode_atomic() because that one will later become internal
to drm_client_modeset.
v3:
- Use full drm_client_init/release for the modesets (Daniel Vetter)
- drm_client_for_each_modeset: use lockdep_assert_held (Daniel Vetter)
- Hook up to Documentation/gpu/drm-client.rst (Daniel Vetter)
v2:
- Add modesets array to drm_client (Daniel Vetter)
- Use a new file for the modeset code (Daniel Vetter)
- File has to be MIT licensed (Emmanuel Vadot)
- Add copyrights from drm_fb_helper.c
Daniel Vetter [Mon, 3 Jun 2019 14:28:48 +0000 (16:28 +0200)]
drm/docs: More links for implicit/explicit fencing.
drm_atomic_set_fence_for_plane() contains the main discussion from a
driver pov, link to that from more places.
Cc: Pekka Paalanen <pekka.paalanen@collabora.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190603142848.26487-1-daniel.vetter@ffwll.ch
drm/amd/display: Only force modesets when toggling HDR
[Why]
We can issue HDR static metadata as part of stream updates for
non-modesets as long as we force a modeset when entering or exiting HDR.
This avoids unnecessary blanking for simple metadata updates.
[How]
When changing scaling and abm for the stream also check if HDR has
changed and send the stream update. This will only happen in non-modeset
cases.
drm/amd/display: Expose HDR output metadata for supported connectors
[Why]
For userspace to send static HDR metadata to the display we need to
attach the property on the connector and send it to DC.
[How]
The property is attached to HDMI and DP connectors. Since the metadata
isn't actually available when creating the connector this isn't a
property we can dynamically support based on the extension block
being available or not.
When the HDR metadata is changed a modeset will be forced for now.
We need to switch from 8bpc to 10bpc in most cases anyway, and we want
to fully exit HDR mode when userspace gives us a NULL metadata, so this
isn't completely unnecessary.
The requirement can later be reduced to just entering and exiting HDR
or switching max bpc.
projects / linux.git / log