Bryan O'Donoghue [Wed, 26 Jun 2019 10:27:31 +0000 (11:27 +0100)]
nvmem: imx-ocotp: Add i.MX8MM support
This patch adds support to burn the fuses on the i.MX8MM.
https://www.nxp.com/webapp/Download?colCode=IMX8MMRM
The i.MX8MM is similar to i.MX6 processors in terms of addressing and clock
setup.
The documentation specifies 60 discreet OTP registers but, the fusemap
address space encompasses up to 256 registers. We map the entire putative
256 OTP registers.
Bryan O'Donoghue [Wed, 26 Jun 2019 10:27:30 +0000 (11:27 +0100)]
nvmem: imx-ocotp: Change TIMING calculation to u-boot algorithm
The RELAX field of the OCOTP block is turning out as a zero on i.MX8MM.
This messes up the subsequent re-load of the fuse shadow registers.
After some discussion with people @ NXP its clear we have missed a trick
here in Linux.
The OCOTP fuse programming time has a physical minimum 'burn time' that is
not related to the ipg_clk.
We need to define the RELAX, STROBE_READ and STROBE_PROG fields in terms of
desired timings to allow for the burn-in to safely complete. Right now only
the RELAX field is calculated in terms of an absolute time and we are
ending up with a value of zero.
This patch inherits the u-boot timings for the OCOTP_TIMING calculation on
the i.MX6 and i.MX8. Those timings are known to work and critically specify
values such as STROBE_PROG as a minimum timing.
Bryan O'Donoghue [Wed, 26 Jun 2019 10:27:29 +0000 (11:27 +0100)]
nvmem: imx-ocotp: Ensure WAIT bits are preserved when setting timing
The i.MX6 and i.MX8 both have a bit-field spanning bits 27:22 called the
WAIT field.
The WAIT field according to the documentation for both parts "specifies
time interval between auto read and write access in one time program. It is
given in number of ipg_clk periods."
This patch ensures that the relevant field is read and written back to the
timing register.
Bryan O'Donoghue [Wed, 26 Jun 2019 10:27:28 +0000 (11:27 +0100)]
nvmem: imx-ocotp: Elongate OCOTP_CTRL ADDR field to eight bits
i.MX6 defines OCOTP_CTRLn:ADDR as seven bit address-field with a one bit
RSVD0 field, i.MX7 defines OCOTP_CTRLn:ADDR as a four bit address-field
with a four bit RSVD0 field.
i.MX8 defines the OCOTP_CTRLn:ADDR bit-field as a full range eight bits.
i.MX6 and i.MX7 should return zero for their respective RSVD0 bits and
ignore a write-back of zero where i.MX8 will make use of the full range.
This patch expands the bit-field definition for all users to eight bits,
which is safe due to RSVD0 being a no-op for the i.MX6 and i.MX7.
Kees Cook [Sat, 22 Jun 2019 20:18:23 +0000 (13:18 -0700)]
lkdtm: Check for SMEP clearing protections
This adds an x86-specific test for pinned cr4 bits. A successful test
will validate pinning and check the ROP-style call-middle-of-function
defense, if needed. For example, in the case of native_write_cr4()
looking like this:
The UNSET_SMEP test will jump to ffffffff8171bcea (the mov to cr4)
instead of ffffffff8171bce0 (native_write_cr4() entry) to simulate a
direct-call bypass attempt.
Expected successful results:
# echo UNSET_SMEP > /sys/kernel/debug/provoke-crash/DIRECT
# dmesg
[ 79.594433] lkdtm: Performing direct entry UNSET_SMEP
[ 79.596459] lkdtm: trying to clear SMEP normally
[ 79.598406] lkdtm: ok: SMEP did not get cleared
[ 79.599981] lkdtm: trying to clear SMEP with call gadget
[ 79.601810] ------------[ cut here ]------------
[ 79.603421] Attempt to unpin cr4 bits: 100000; bypass attack?!
...
[ 79.650170] ---[ end trace 2452ca0f6126242e ]---
[ 79.650937] lkdtm: ok: SMEP removal was reverted
Linus Torvalds [Sat, 22 Jun 2019 21:08:47 +0000 (14:08 -0700)]
Merge tag 'iommu-fix-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fix from Joerg Roedel:
"Revert a commit from the previous pile of fixes which causes new
lockdep splats. It is better to revert it for now and work on a better
and more well tested fix"
* tag 'iommu-fix-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
Revert "iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock"
With 5.2.0-rc5 I can easily trigger this with lockdep and iommu=pt:
======================================================
WARNING: possible circular locking dependency detected
5.2.0-rc5 #78 Not tainted
------------------------------------------------------
swapper/0/1 is trying to acquire lock: 00000000ea2b3beb (&(&iommu->lock)->rlock){+.+.}, at: domain_context_mapping_one+0xa5/0x4e0
but task is already holding lock: 00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (device_domain_lock){....}:
_raw_spin_lock_irqsave+0x3c/0x50
dmar_insert_one_dev_info+0xbb/0x510
domain_add_dev_info+0x50/0x90
dev_prepare_static_identity_mapping+0x30/0x68
intel_iommu_init+0xddd/0x1422
pci_iommu_init+0x16/0x3f
do_one_initcall+0x5d/0x2b4
kernel_init_freeable+0x218/0x2c1
kernel_init+0xa/0x100
ret_from_fork+0x3a/0x50
-> #0 (&(&iommu->lock)->rlock){+.+.}:
lock_acquire+0x9e/0x170
_raw_spin_lock+0x25/0x30
domain_context_mapping_one+0xa5/0x4e0
pci_for_each_dma_alias+0x30/0x140
dmar_insert_one_dev_info+0x3b2/0x510
domain_add_dev_info+0x50/0x90
dev_prepare_static_identity_mapping+0x30/0x68
intel_iommu_init+0xddd/0x1422
pci_iommu_init+0x16/0x3f
do_one_initcall+0x5d/0x2b4
kernel_init_freeable+0x218/0x2c1
kernel_init+0xa/0x100
ret_from_fork+0x3a/0x50
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(device_domain_lock);
lock(&(&iommu->lock)->rlock);
lock(device_domain_lock);
lock(&(&iommu->lock)->rlock);
*** DEADLOCK ***
2 locks held by swapper/0/1:
#0: 00000000033eb13d (dmar_global_lock){++++}, at: intel_iommu_init+0x1e0/0x1422
#1: 00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0
domain_context_mapping_one() is taking device_domain_lock first then
iommu lock, while dmar_insert_one_dev_info() is doing the reverse.
That should be introduced by commit:
7560cc3ca7d9 ("iommu/vt-d: Fix lock inversion between iommu->lock and
device_domain_lock", 2019-05-27)
So far I still cannot figure out how the previous deadlock was
triggered (I cannot find iommu lock taken before calling of
iommu_flush_dev_iotlb()), however I'm pretty sure that that change
should be incomplete at least because it does not fix all the places
so we're still taking the locks in different orders, while reverting
that commit is very clean to me so far that we should always take
device_domain_lock first then the iommu lock.
We can continue to try to find the real culprit mentioned in 7560cc3ca7d9, but for now I think we should revert it to fix current
breakage.
CC: Joerg Roedel <joro@8bytes.org> CC: Lu Baolu <baolu.lu@linux.intel.com> CC: dave.jiang@intel.com Signed-off-by: Peter Xu <peterx@redhat.com> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Joerg Roedel <jroedel@suse.de>
Linus Torvalds [Sat, 22 Jun 2019 16:42:29 +0000 (09:42 -0700)]
Merge tag 'pci-v5.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"If an IOMMU is present, ignore the P2PDMA whitelist we added for v5.2
because we don't yet know how to support P2PDMA in that case (Logan
Gunthorpe)"
* tag 'pci-v5.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/P2PDMA: Ignore root complex whitelist when an IOMMU is present
Linus Torvalds [Sat, 22 Jun 2019 16:39:03 +0000 (09:39 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three driver fixes (and one version number update): a suspend hang in
ufs, a qla hard lock on module removal and a qedi panic during
discovery"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix hardlockup in abort command during driver remove
scsi: ufs: Avoid runtime suspend possibly being blocked forever
scsi: qedi: update driver version to 8.37.0.20
scsi: qedi: Check targetname while finding boot target information
Linus Torvalds [Sat, 22 Jun 2019 16:09:42 +0000 (09:09 -0700)]
Merge tag 'powerpc-5.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"This is a frustratingly large batch at rc5. Some of these were sent
earlier but were missed by me due to being distracted by other things,
and some took a while to track down due to needing manual bisection on
old hardware. But still we clearly need to improve our testing of KVM,
and of 32-bit, so that we catch these earlier.
Summary: seven fixes, all for bugs introduced this cycle.
- The commit to add KASAN support broke booting on 32-bit SMP
machines, due to a refactoring that moved some setup out of the
secondary CPU path.
- A fix for another 32-bit SMP bug introduced by the fast syscall
entry implementation for 32-bit BOOKE. And a build fix for the same
commit.
- Our change to allow the DAWR to be force enabled on Power9
introduced a bug in KVM, where we clobber r3 leading to a host
crash.
- The same commit also exposed a previously unreachable bug in the
nested KVM handling of DAWR, which could lead to an oops in a
nested host.
- One of the DMA reworks broke the b43legacy WiFi driver on some
people's powermacs, fix it by enabling a 30-bit ZONE_DMA on 32-bit.
- A fix for TLB flushing in KVM introduced a new bug, as it neglected
to also flush the ERAT, this could lead to memory corruption in the
guest.
Thanks to: Aaro Koskinen, Christoph Hellwig, Christophe Leroy, Larry
Finger, Michael Neuling, Suraj Jitindar Singh"
* tag 'powerpc-5.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Invalidate ERAT when flushing guest TLB entries
powerpc: enable a 30-bit ZONE_DMA for 32-bit pmac
KVM: PPC: Book3S HV: Only write DAWR[X] when handling h_set_dawr in real mode
KVM: PPC: Book3S HV: Fix r3 corruption in h_set_dabr()
powerpc/32: fix build failure on book3e with KVM
powerpc/booke: fix fast syscall entry on SMP
powerpc/32s: fix initial setup of segment registers on secondary CPU
Marcel Holtmann [Sat, 22 Jun 2019 13:47:01 +0000 (15:47 +0200)]
Bluetooth: Fix regression with minimum encryption key size alignment
When trying to align the minimum encryption key size requirement for
Bluetooth connections, it turns out doing this in a central location in
the HCI connection handling code is not possible.
Original Bluetooth version up to 2.0 used a security model where the
L2CAP service would enforce authentication and encryption. Starting
with Bluetooth 2.1 and Secure Simple Pairing that model has changed into
that the connection initiator is responsible for providing an encrypted
ACL link before any L2CAP communication can happen.
Now connecting Bluetooth 2.1 or later devices with Bluetooth 2.0 and
before devices are causing a regression. The encryption key size check
needs to be moved out of the HCI connection handling into the L2CAP
channel setup.
To achieve this, the current check inside hci_conn_security() has been
moved into l2cap_check_enc_key_size() helper function and then called
from four decisions point inside L2CAP to cover all combinations of
Secure Simple Pairing enabled devices and device using legacy pairing
and legacy service security model.
Fixes: d5bb334a8e17 ("Bluetooth: Align minimum encryption key size for LE and BR/EDR connections")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203643 Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Todd Kjos [Fri, 21 Jun 2019 17:54:15 +0000 (10:54 -0700)]
binder: fix memory leak in error path
syzkallar found a 32-byte memory leak in a rarely executed error
case. The transaction complete work item was not freed if put_user()
failed when writing the BR_TRANSACTION_COMPLETE to the user command
buffer. Fixed by freeing it before put_user() is called.
1) Fix leak of unqueued fragments in ipv6 nf_defrag, from Guillaume
Nault.
2) Don't access the DDM interface unless the transceiver implements it
in bnx2x, from Mauro S. M. Rodrigues.
3) Don't double fetch 'len' from userspace in sock_getsockopt(), from
JingYi Hou.
4) Sign extension overflow in lio_core, from Colin Ian King.
5) Various netem bug fixes wrt. corrupted packets from Jakub Kicinski.
6) Fix epollout hang in hvsock, from Sunil Muthuswamy.
7) Fix regression in default fib6_type, from David Ahern.
8) Handle memory limits in tcp_fragment more appropriately, from Eric
Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (24 commits)
tcp: refine memory limit test in tcp_fragment()
inet: clear num_timeout reqsk_alloc()
net: mvpp2: debugfs: Add pmap to fs dump
ipv6: Default fib6_type to RTN_UNICAST when not set
net: hns3: Fix inconsistent indenting
net/af_iucv: always register net_device notifier
net/af_iucv: build proper skbs for HiperTransport
net/af_iucv: remove GFP_DMA restriction for HiperTransport
net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge()
hvsock: fix epollout hang from race condition
net/udp_gso: Allow TX timestamp with UDP GSO
net: netem: fix use after free and double free with packet corruption
net: netem: fix backlog accounting for corrupted GSO frames
net: lio_core: fix potential sign-extension overflow on large shift
tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skb
ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL
ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL
tun: wake up waitqueues after IFF_UP is set
net: remove duplicate fetch in sock_getsockopt
tipc: fix issues with early FAILOVER_MSG from peer
...
Eric Dumazet [Fri, 21 Jun 2019 13:09:55 +0000 (06:09 -0700)]
tcp: refine memory limit test in tcp_fragment()
tcp_fragment() might be called for skbs in the write queue.
Memory limits might have been exceeded because tcp_sendmsg() only
checks limits at full skb (64KB) boundaries.
Therefore, we need to make sure tcp_fragment() wont punish applications
that might have setup very low SO_SNDBUF values.
Fixes: f070ef2ac667 ("tcp: tcp_fragment() should apply sane memory limits") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Christoph Paasch <cpaasch@apple.com> Tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 21 Jun 2019 21:47:09 +0000 (14:47 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Doug Ledford:
"This is probably our last -rc pull request. We don't have anything
else outstanding at the moment anyway, and with the summer months on
us and people taking trips, I expect the next weeks leading up to the
merge window to be pretty calm and sedate.
This has two simple, no brainer fixes for the EFA driver.
Then it has ten not quite so simple fixes for the hfi1 driver. The
problem with them is that they aren't simply one liner typo fixes.
They're still fixes, but they're more complex issues like livelock
under heavy load where the answer was to change work queue usage and
spinlock usage to resolve the problem, or issues with orphaned
requests during certain types of failures like link down which
required some more complex work to fix too. They all look like
legitimate fixes to me, they just aren't small like I wish they were.
Summary:
- 2 minor EFA fixes
- 10 hfi1 fixes related to scaling issues"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/efa: Handle mmap insertions overflow
RDMA/efa: Fix success return value in case of error
IB/hfi1: Handle port down properly in pio
IB/hfi1: Handle wakeup of orphaned QPs for pio
IB/hfi1: Wakeup QPs orphaned on wait list after flush
IB/hfi1: Use aborts to trigger RC throttling
IB/hfi1: Create inline to get extended headers
IB/hfi1: Silence txreq allocation warnings
IB/hfi1: Avoid hardlockup with flushlist_lock
IB/hfi1: Correct tid qp rcd to match verbs context
IB/hfi1: Close PSM sdma_progress sleep window
IB/hfi1: Validate fault injection opcode user input
Linus Torvalds [Fri, 21 Jun 2019 20:45:41 +0000 (13:45 -0700)]
Merge tag 'nfs-for-5.2-3' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull more NFS client fixes from Anna Schumaker:
"These are mostly refcounting issues that people have found recently.
The revert fixes a suspend recovery performance issue.
- SUNRPC: Fix a credential refcount leak
- Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE"
- SUNRPC: Fix xps refcount imbalance on the error path
- NFS4: Only set creation opendata if O_CREAT"
* tag 'nfs-for-5.2-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: Fix a credential refcount leak
Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE"
net :sunrpc :clnt :Fix xps refcount imbalance on the error path
NFS4: Only set creation opendata if O_CREAT
Andy Lutomirski [Fri, 21 Jun 2019 15:43:04 +0000 (08:43 -0700)]
x86/vdso: Prevent segfaults due to hoisted vclock reads
GCC 5.5.0 sometimes cleverly hoists reads of the pvclock and/or hvclock
pages before the vclock mode checks. This creates a path through
vclock_gettime() in which no vclock is enabled at all (due to disabled
TSC on old CPUs, for example) but the pvclock or hvclock page
nevertheless read. This will segfault on bare metal.
This fixes commit 459e3a21535a ("gcc-9: properly declare the
{pv,hv}clock_page storage") in the sense that, before that commit, GCC
didn't seem to generate the offending code. There was nothing wrong
with that commit per se, and -stable maintainers should backport this to
all supported kernels regardless of whether the offending commit was
present, since the same crash could just as easily be triggered by the
phase of the moon.
On GCC 9.1.1, this doesn't seem to affect the generated code at all, so
I'm not too concerned about performance regressions from this fix.
Trond Myklebust [Thu, 20 Jun 2019 14:47:40 +0000 (10:47 -0400)]
SUNRPC: Fix a credential refcount leak
All callers of __rpc_clone_client() pass in a value for args->cred,
meaning that the credential gets assigned and referenced in
the call to rpc_new_client().
Reported-by: Ido Schimmel <idosch@idosch.org> Fixes: 79caa5fad47c ("SUNRPC: Cache cred of process creating the rpc_client") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Anna Schumaker [Tue, 18 Jun 2019 18:57:33 +0000 (14:57 -0400)]
Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE"
Jon Hunter reports:
"I have been noticing intermittent failures with a system suspend test on
some of our machines that have a NFS mounted root file-system. Bisecting
this issue points to your commit 431235818bc3 ("SUNRPC: Declare RPC
timers as TIMER_DEFERRABLE") and reverting this on top of v5.2-rc3 does
appear to resolve the problem.
The cause of the suspend failure appears to be a long delay observed
sometimes when resuming from suspend, and this is causing our test to
timeout."
We can end up in nfs4_opendata_alloc during task exit, in which case
current->fs has already been cleaned up. This leads to a crash in
current_umask().
Fix this by only setting creation opendata if we are actually doing an open
with O_CREAT. We can drop the check for NULL nfs4_open_createattrs, since
O_CREAT will never be set for the recovery path.
Suggested-by: Trond Myklebust <trondmy@hammerspace.com> Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Linus Torvalds [Fri, 21 Jun 2019 18:03:33 +0000 (11:03 -0700)]
Merge tag 'drm-fixes-2019-06-21' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Just catching up on the week since back from holidays, everything
seems quite sane.
core:
- copy_to_user fix for really legacy codepaths.
vmwgfx:
- two dma fixes
- one virt hw interaction fix
i915:
- modesetting fix
- gvt fix
panfrost:
- BO unmapping fix
imx:
- image converter fixes"
* tag 'drm-fixes-2019-06-21' of git://anongit.freedesktop.org/drm/drm:
drm/i915: Don't clobber M/N values during fastset check
drm: return -EFAULT if copy_to_user() fails
drm/panfrost: Make sure a BO is only unmapped when appropriate
drm/i915/gvt: ignore unexpected pvinfo write
gpu: ipu-v3: image-convert: Fix image downsize coefficients
gpu: ipu-v3: image-convert: Fix input bytesperline for packed formats
gpu: ipu-v3: image-convert: Fix input bytesperline width/height align
drm/vmwgfx: fix a warning due to missing dma_parms
drm/vmwgfx: Honor the sg list segment size limitation
drm/vmwgfx: Use the backdoor port if the HB port is not available
Linus Torvalds [Fri, 21 Jun 2019 17:20:19 +0000 (10:20 -0700)]
Merge tag 'staging-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO/counter fixes from Greg KH:
"Here are some small driver bugfixes for some staging/iio/counter
drivers.
Staging and IIO have been lumped together for a while, as those
subsystems cross the areas a log, and counter is used by IIO, so
that's why they are all in one pull request here.
These are small fixes for reported issues in some iio drivers, the
erofs filesystem, and a build issue for counter code.
All have been in linux-next with no reported issues"
* tag 'staging-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: erofs: add requirements field in superblock
counter/ftm-quaddec: Add missing dependencies in Kconfig
staging: iio: adt7316: Fix build errors when GPIOLIB is not set
iio: temperature: mlx90632 Relax the compatibility check
iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller
staging:iio:ad7150: fix threshold mode config bit
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
habanalabs: use u64_to_user_ptr() for reading user pointers
doc: fix documentation about UIO_MEM_LOGICAL using
MAINTAINERS / Documentation: Thorsten Scherer is the successor of Gavin Schenk
docs: fb: Add TER16x32 to the available font names
MAINTAINERS: fpga: hand off maintainership to Moritz
thunderbolt: Implement CIO reset correctly for Titan Ridge
binder: fix possible UAF when freeing buffer
thunderbolt: Make sure device runtime resume completes before taking domain lock
soundwire: intel: set dai min and max channels correctly
soundwire: stream: fix bad unlock balance
soundwire: stream: fix out of boundary access on port properties
Linus Torvalds [Fri, 21 Jun 2019 17:16:41 +0000 (10:16 -0700)]
Merge tag 'usb-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are four small USB fixes for 5.2-rc6.
They include two xhci bugfixes, a chipidea fix, and a small dwc2 fix.
Nothing major, just nice things to get resolved for reported issues.
All have been in linux-next with no reported issues"
* tag 'usb-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: detect USB 3.2 capable host controllers correctly
usb: xhci: Don't try to recover an endpoint if port is in error state.
usb: dwc2: Use generic PHY width in params setup
usb: chipidea: udc: workaround for endpoint conflict issue
Linus Torvalds [Fri, 21 Jun 2019 16:58:42 +0000 (09:58 -0700)]
Merge tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull still more SPDX updates from Greg KH:
"Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update
for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates
that were "easy" to determine by pattern matching. The ones after this
are going to be a bit more difficult and the people on the spdx list
will be discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud,
always nice to see in a diffstat"
* tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485
...
Linus Torvalds [Fri, 21 Jun 2019 16:51:44 +0000 (09:51 -0700)]
Merge tag '5.2-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Four small SMB3 fixes, all for stable"
* tag '5.2-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix GlobalMid_Lock bug in cifs_reconnect
SMB3: retry on STATUS_INSUFFICIENT_RESOURCES instead of failing write
cifs: add spinlock for the openFileList to cifsInodeInfo
cifs: fix panic in smb2_reconnect
Dragan Cvetic [Tue, 11 Jun 2019 17:29:37 +0000 (18:29 +0100)]
misc: xilinx_sdfec: Add CCF support
Add the support for Linux Clock Control Framework (CCF).
Registers and enables clocks with the Clock Control
Framework (CCF), to prevent shared clocks from been
disabled.
Dragan Cvetic [Tue, 11 Jun 2019 17:29:36 +0000 (18:29 +0100)]
misc: xilinx-sdfec: add core driver
Implement a platform driver that matches with xlnx,
sd-fec-1.1 device tree node and registers as a character
device, including:
- SD-FEC driver binds to sdfec DT node.
- creates and initialise an initial driver dev structure.
- add the driver in Linux build and Kconfig.
Vishnu DASA [Fri, 24 May 2019 15:13:10 +0000 (15:13 +0000)]
VMCI: Fix integer overflow in VMCI handle arrays
The VMCI handle array has an integer overflow in
vmci_handle_arr_append_entry when it tries to expand the array. This can be
triggered from a guest, since the doorbell link hypercall doesn't impose a
limit on the number of doorbell handles that a VM can create in the
hypervisor, and these handles are stored in a handle array.
In this change, we introduce a mandatory max capacity for handle
arrays/lists to avoid excessive memory usage.
Generic register bitfield-based multiplexer that controls the multiplexer
producer defined under a parent node.
The driver corresponding to parent node provides register read/write
capabilities.
Dave Airlie [Fri, 21 Jun 2019 01:44:20 +0000 (11:44 +1000)]
Merge tag 'imx-drm-fixes-2019-06-20' of git://git.pengutronix.de/git/pza/linux into drm-fixes
drm/imx: ipu-v3 image converter fixes
This series fixes input buffer alignment and downsizer configuration
to adhere to IPU mem2mem CSC/scaler hardware restrictions in certain
downscaling ratios.
Dave Airlie [Fri, 21 Jun 2019 01:26:59 +0000 (11:26 +1000)]
Merge branch 'vmwgfx-fixes-5.2' of git://people.freedesktop.org/~thomash/linux into drm-fixes
A couple of fixes for vmwgfx. Two fixes for a DMA sg-list debug warning
message. These are not cc'd stable since there is no evidence of actual
breakage.
On fix for the high-bandwidth backdoor port which is cc'd stable due to
upcoming hardware, on which the code would otherwise break.
ARM: 8867/1: vdso: pass --be8 to linker if necessary
The commit fe00e50b2db8 ("ARM: 8858/1: vdso: use $(LD) instead of $(CC)
to link VDSO") removed the passing of CFLAGS, since ld doesn't take
those directly. However, prior, big-endian ARM was relying on gcc to
translate its -mbe8 option into ld's --be8 option. Lacking this, ld
generated be32 code, making the VDSO generate SIGILL when called by
userspace.
This commit passes --be8 if CONFIG_CPU_ENDIAN_BE8 is enabled.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Linus Torvalds [Thu, 20 Jun 2019 21:19:34 +0000 (14:19 -0700)]
Merge tag 'ovl-fixes-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Fix two regressions in this cycle, and a couple of older bugs"
* tag 'ovl-fixes-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: make i_ino consistent with st_ino in more cases
ovl: fix typo in MODULE_PARM_DESC
ovl: fix bogus -Wmaybe-unitialized warning
ovl: don't fail with disconnected lower NFS
ovl: fix wrong flags check in FS_IOC_FS[SG]ETXATTR ioctls
Linus Torvalds [Thu, 20 Jun 2019 21:16:16 +0000 (14:16 -0700)]
Merge tag 'fuse-fixes-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fix from Miklos Szeredi:
"Just a single revert, fixing a regression in -rc1"
* tag 'fuse-fixes-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
Revert "fuse: require /dev/fuse reads to have enough buffer capacity"
Linus Torvalds [Thu, 20 Jun 2019 20:50:37 +0000 (13:50 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Fixes for ARM and x86, plus selftest patches and nicer structs for
nested state save/restore"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: nVMX: reorganize initial steps of vmx_set_nested_state
KVM: arm/arm64: Fix emulated ptimer irq injection
tests: kvm: Check for a kernel warning
kvm: tests: Sort tests in the Makefile alphabetically
KVM: x86/mmu: Allocate PAE root array when using SVM's 32-bit NPT
KVM: x86: Modify struct kvm_nested_state to have explicit fields for data
KVM: fix typo in documentation
KVM: nVMX: use correct clean fields when copying from eVMCS
KVM: arm/arm64: vgic: Fix kvm_device leak in vgic_its_destroy
KVM: arm64: Filter out invalid core register IDs in KVM_GET_REG_LIST
KVM: arm64: Implement vq_present() as a macro
Linus Torvalds [Thu, 20 Jun 2019 19:04:57 +0000 (12:04 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"This is mainly a couple of email address updates to MAINTAINERS, but
we've also fixed a UAPI build issue with musl libc and an accidental
double-initialisation of our pgd_cache due to a naming conflict with a
weak symbol.
There are a couple of outstanding issues that have been reported, but
it doesn't look like they're new and we're still a long way off from
fully debugging them.
Summary:
- Fix use of #include in UAPI headers for compatability with musl libc
- Update email addresses in MAINTAINERS
- Fix initialisation of pgd_cache due to name collision with weak symbol"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/mm: don't initialize pgd_cache twice
MAINTAINERS: Update my email address
arm64/sve: <uapi/asm/ptrace.h> should not depend on <uapi/linux/prctl.h>
arm64: ssbd: explicitly depend on <linux/prctl.h>
MAINTAINERS: Update my email address to use @kernel.org
Linus Torvalds [Thu, 20 Jun 2019 19:03:41 +0000 (12:03 -0700)]
Merge tag 's390-5.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Disable address-of-packed-member warning in s390 specific boot code
to get rid of a gcc9 warning which otherwise is already disabled for
the whole kernel.
- Fix yet another compiler error seen with CONFIG_OPTIMIZE_INLINING
enabled.
- Fix memory leak in vfio-ccw code on module exit.
* tag 's390-5.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
vfio-ccw: Destroy kmem cache region on module exit
s390/ctl_reg: mark __ctl_set_bit and __ctl_clear_bit as __always_inline
s390/boot: disable address-of-packed-member warning
Linus Torvalds [Thu, 20 Jun 2019 17:12:53 +0000 (10:12 -0700)]
Merge tag 'for_v5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull two misc vfs fixes from Jan Kara:
"One small quota fix fixing spurious EDQUOT errors and one fanotify fix
fixing a bug in the new fanotify FID reporting code"
* tag 'for_v5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: update connector fsid cache on add mark
quota: fix a problem about transfer quota
Linus Torvalds [Thu, 20 Jun 2019 17:08:38 +0000 (10:08 -0700)]
Merge tag 'mmc-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"Here's quite a few MMC fixes intended for v5.2-rc6. This time it also
contains fixes for a WiFi driver, which device is attached to the SDIO
interface. Patches for the WiFi driver have been acked by the
corresponding maintainers.
Summary:
MMC core:
- Make switch to eMMC HS400 more robust for some controllers
- Add two SDIO func API to manage re-tuning constraints
- Prevent processing SDIO IRQs when the card is suspended
MMC host:
- sdhi: Disallow broken HS400 for M3-W ES1.2, RZ/G2M and V3H
- mtk-sd: Fixup support for SDIO IRQs
- sdhci-pci-o2micro: Fixup support for tuning
Wireless BRCMFMAC (SDIO):
- Deal with expected transmission errors related to the idle states
(handled by the Always-On-Subsystem or AOS) on the SDIO-based WiFi
on rk3288-veyron-minnie, rk3288-veyron-speedy and
rk3288-veyron-mickey"
* tag 'mmc-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Prevent processing SDIO IRQs when the card is suspended
mmc: sdhci: sdhci-pci-o2micro: Correctly set bus width when tuning
brcmfmac: sdio: Don't tune while the card is off
mmc: core: Add sdio_retune_hold_now() and sdio_retune_release()
brcmfmac: sdio: Disable auto-tuning around commands expected to fail
mmc: core: API to temporarily disable retuning for SDIO CRC errors
Revert "brcmfmac: disable command decode in sdio_aos"
mmc: mediatek: fix SDIO IRQ detection issue
mmc: mediatek: fix SDIO IRQ interrupt handle flow
mmc: core: complete HS400 before checking status
mmc: sdhi: disallow HS400 for M3-W ES1.2, RZ/G2M, and V3H
Linus Torvalds [Thu, 20 Jun 2019 16:58:35 +0000 (09:58 -0700)]
Merge tag 'for-linus-20190620' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Three fixes that should go into this series.
One is a set of two patches from Christoph, fixing a page leak on same
page merges. Boiled down version of a bigger fix, but this one is more
appropriate for this late in the cycle (and easier to backport to
stable).
The last patch is for a divide error in MD, from Mariusz (via Song)"
* tag 'for-linus-20190620' of git://git.kernel.dk/linux-block:
md: fix for divide error in status_resync
block: fix page leak when merging to same page
block: return from __bio_try_merge_page if merging occured in the same page
Paolo Bonzini [Thu, 20 Jun 2019 16:24:18 +0000 (18:24 +0200)]
Merge tag 'kvmarm-fixes-for-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm fixes for 5.2, take #2
- SVE cleanup killing a warning with ancient GCC versions
- Don't report non-existent system registers to userspace
- Fix memory leak when freeing the vgic ITS
- Properly lower the interrupt on the emulated physical timer
Paolo Bonzini [Wed, 19 Jun 2019 14:52:27 +0000 (16:52 +0200)]
KVM: nVMX: reorganize initial steps of vmx_set_nested_state
Commit 332d079735f5 ("KVM: nVMX: KVM_SET_NESTED_STATE - Tear down old EVMCS
state before setting new state", 2019-05-02) broke evmcs_test because the
eVMCS setup must be performed even if there is no VMXON region defined,
as long as the eVMCS bit is set in the assist page.
While the simplest possible fix would be to add a check on
kvm_state->flags & KVM_STATE_NESTED_EVMCS in the initial "if" that
covers kvm_state->hdr.vmx.vmxon_pa == -1ull, that is quite ugly.
Instead, this patch moves checks earlier in the function and
conditionalizes them on kvm_state->hdr.vmx.vmxon_pa, so that
vmx_set_nested_state always goes through vmx_leave_nested
and nested_enable_evmcs.
Fixes: 332d079735f5 ("KVM: nVMX: KVM_SET_NESTED_STATE - Tear down old EVMCS state before setting new state") Cc: Aaron Lewis <aaronlewis@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: PPC: Book3S HV: Invalidate ERAT when flushing guest TLB entries
When a guest vcpu moves from one physical thread to another it is
necessary for the host to perform a tlb flush on the previous core if
another vcpu from the same guest is going to run there. This is because the
guest may use the local form of the tlb invalidation instruction meaning
stale tlb entries would persist where it previously ran. This is handled
on guest entry in kvmppc_check_need_tlb_flush() which calls
flush_guest_tlb() to perform the tlb flush.
Previously the generic radix__local_flush_tlb_lpid_guest() function was
used, however the functionality was reimplemented in flush_guest_tlb()
to avoid the trace_tlbie() call as the flushing may be done in real
mode. The reimplementation in flush_guest_tlb() was missing an erat
invalidation after flushing the tlb.
This lead to observable memory corruption in the guest due to the
caching of stale translations. Fix this by adding the erat invalidation.
Merge tag 'fixes-for-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
usb: fixes for v5.2-rc5
A single fix to take into account the PHY width during initialization of
dwc2 driver. This change allows deviceTree to pass PHY width if
necessary.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* tag 'fixes-for-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
usb: dwc2: Use generic PHY width in params setup
Arnd Bergmann [Mon, 17 Jun 2019 12:41:33 +0000 (14:41 +0200)]
habanalabs: use u64_to_user_ptr() for reading user pointers
We cannot cast a 64-bit integer to a pointer on 32-bit architectures
without a warning:
drivers/misc/habanalabs/habanalabs_ioctl.c: In function 'debug_coresight':
drivers/misc/habanalabs/habanalabs_ioctl.c:143:23: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
input = memdup_user((const void __user *) args->input_ptr,
Use the macro that was defined for this purpose.
Fixes: 315bc055ed56 ("habanalabs: add new IOCTL for debug, tracing and profiling") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Rely on MODULE_ALIAS() for automatic kernel module loading, rather than
basing it on the OF compatible. This ensures that drivers without
of_device_id table, such as wcd9335, will be automatically loaded.
Takashi Iwai [Tue, 18 Jun 2019 20:34:25 +0000 (22:34 +0200)]
fonts: Prefer a bigger font for high resolution screens
Although we may have multiple fonts in kernel, the small 8x16 font is
chosen as default usually unless user specify the boot option. This
is suboptimal for monitors with high resolutions.
This patch tries to assign a bigger font for such a high resolution by
calculating some penalty value. This won't change anything for a
standard monitor like Full HD (1920x1080), but for a high res monitor
like UHD 4K, a bigger font like TER16x32 will be chosen once when
enabled in Kconfig.
Suzuki K Poulose [Wed, 19 Jun 2019 19:53:06 +0000 (13:53 -0600)]
coresight: Support for ACPI bindings
Add support for parsing the ACPI platform description
for CoreSight. The connections are encoded in a DSD graph
property with CoreSight specific variation of the property.
The ETMs are listed as the children device of the respective
CPU.
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suzuki K Poulose [Wed, 19 Jun 2019 19:53:05 +0000 (13:53 -0600)]
coresight: stm: ACPI support for parsing stimulus base
The stimulus base for STM device must be listed as the second memory
resource, followed by the programming base address as described in
"Section 2.3 Resources" in ACPI for CoreSightTM 1.0 Platform Design
documen (DEN0067).
Add support for parsing the information for ACPI.
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suzuki K Poulose [Wed, 19 Jun 2019 19:53:04 +0000 (13:53 -0600)]
coresight: Use platform agnostic names
So far we have reused the name of the "platform" device for
the CoreSight device. But this is not very intuitive when
we move to ACPI. Also, the ACPI device names have ":" in them
(e.g, ARMHC97C:01), which the perf tool doesn't like very much.
This patch introduces a generic naming scheme, givin more intuitive
names for the devices that appear on the CoreSight bus.
The names follow the pattern "prefix" followed by "index" (e.g, etm5).
We maintain a list of allocated devices per "prefix" to make sure
we don't allocate a new name when it is reprobed (e.g, due to
unsatisifed device dependencies). So, we maintain the list
of "fwnodes" of the parent devices to allocate a consistent name.
All devices except the ETMs get an index allocated in the order
of probing. ETMs get an index based on the CPU they are attached to.
TMC devices are named using "tmc_etf", "tmc_etb", and "tmc_etr"
prefixes depending on the configuration of the device.
The replicators and funnels are not classified as dynamic/static
anymore. One could easily figure that out by checking the presence
of "mgmt" registers under sysfs.
Suzuki K Poulose [Wed, 19 Jun 2019 19:53:03 +0000 (13:53 -0600)]
coresight: Use fwnode handle instead of device names
We rely on the device names to find a CoreSight device on the
coresight bus. The device name however is obtained from the platform,
which is bound to the real platform/amba device. As we are about
to use different naming scheme for the coresight devices, we can't
rely on the platform device name to find the corresponding
coresight device. Instead we use the platform agnostic
"fwnode handle" of the parent device to find the devices.
We also reuse the same fwnode as the parent for the Coresight
device we create.
Suzuki K Poulose [Wed, 19 Jun 2019 19:53:01 +0000 (13:53 -0600)]
coresight: Add support for releasing platform specific data
Add a helper to clean up the platform specific data provided
by the firmware. This will be later used for dropping the necessary
references when we switch to the fwnode handles for tracking
connections.
Suzuki K Poulose [Wed, 19 Jun 2019 19:53:00 +0000 (13:53 -0600)]
coresight: Rearrange platform data probing
We are about to introduce methods to clean up the platform data
as we switch to tracking the device reference from "name" to "fwnode
handles" for device connections. This requires us to drop the fwnode
handle references when the data is no longer required - i.e, when
the device probe fails or the device gets unregistered.
In order to consolidate the invocation of the cleanup, we delay the
platform probing to the very last minute, possibly before invoking
the coresight_register. Then, we leave the coresight core code to
do the clean up. i.e, if the coresight_register fails, it takes
care of freeing the data. Otherwise, coresight_unregister will
do the necessary operations.
Suzuki K Poulose [Wed, 19 Jun 2019 19:52:59 +0000 (13:52 -0600)]
coresight: Reuse platform data structure for connection tracking
The platform specific information describes the connections and
the ports of a given coresigh device. This information is also
recorded in the coresight device as separate fields. Let us reuse
the original platform description to streamline the handling
of the data.
Suzuki K Poulose [Wed, 19 Jun 2019 19:52:58 +0000 (13:52 -0600)]
coresight: Cleanup coresight_remove_conns
When a device is unregistered, we remove all connection
references to it, by searching the connection records of
all devices in the coresight bus, via coresight_remove_conns.
We could avoid searching if this device doesn't have an input
port (e.g, a source). Also document the purpose of the function.
Suzuki K Poulose [Wed, 19 Jun 2019 19:52:57 +0000 (13:52 -0600)]
coresight: Remove name from platform description
We are about to use a name independent of the parent AMBA device
name. As such, there is no need to have it in the platform description.
Let us move this to coresight description instead.
Suzuki K Poulose [Wed, 19 Jun 2019 19:52:56 +0000 (13:52 -0600)]
coresight: Remove cpu field from platform data
CPU field is only used by ETMs and there is a separate API
for fetching the same. So, let us use that instead of using
the common platform probing helper. Also, remove it from the
platform_data.
Suzuki K Poulose [Wed, 19 Jun 2019 19:52:55 +0000 (13:52 -0600)]
coresight: Make device to CPU mapping generic
The CoreSight components ETM and CPU-Debug are always associated
with CPUs. Replace the of_coresight_get_cpu() with a platform
agnostic helper, in preparation to add ACPI support.
Suzuki K Poulose [Wed, 19 Jun 2019 19:52:54 +0000 (13:52 -0600)]
coresight: Introduce generic platform data helper
So far we have hard coded the DT platform parsing code in
every driver. Introduce generic helper to parse the information
provided by the firmware in a platform agnostic manner, in preparation
for the ACPI support.
Suzuki K Poulose [Wed, 19 Jun 2019 19:52:52 +0000 (13:52 -0600)]
coresight: platform: Make memory allocation helper generic
Rename the of_coresight_alloc_memory() => coresight_alloc_conns()
as it is independent of the underlying firmware type. This is in
preparation for the ACPI support.
Suzuki K Poulose [Wed, 19 Jun 2019 19:52:51 +0000 (13:52 -0600)]
coresight: Rename of_coresight to coresight-platform
Rename the firmware handling file to a more generic
name, in preparation for adding ACPI support. Right now
we only support DT and we have all the platform handling
code in of_coresight.c. Let us rename the file to
coresight-platform.c in order to keep the platform handling
in a single place for DT and the upcoming ACPI support.
J. Bruce Fields [Wed, 19 Jun 2019 21:06:24 +0000 (17:06 -0400)]
nfsd: replace Jeff by Chuck as nfsd co-maintainer
Jeff's picking up more responsibilities elsewhere, and Chuck's agreed to
take over.
For now, as before, nothing's changing day-to-day, but I want to have a
co-maintainer if only for bus factor.
Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Dumazet [Wed, 19 Jun 2019 16:38:38 +0000 (09:38 -0700)]
inet: clear num_timeout reqsk_alloc()
KMSAN caught uninit-value in tcp_create_openreq_child() [1]
This is caused by a recent change, combined by the fact
that TCP cleared num_timeout, num_retrans and sk fields only
when a request socket was about to be queued.
Under syncookie mode, a temporary request socket is used,
and req->num_timeout could contain garbage.
Lets clear these three fields sooner, there is really no
point trying to defer this and risk other bugs.
Logan Gunthorpe [Wed, 19 Jun 2019 18:56:26 +0000 (12:56 -0600)]
PCI/P2PDMA: Ignore root complex whitelist when an IOMMU is present
Presently, there is no path to DMA map P2PDMA memory, so if a TLP targeting
this memory hits the root complex and an IOMMU is present, the IOMMU will
reject the transaction, even if the RC would support P2PDMA.
So until the kernel knows to map these DMA addresses in the IOMMU, we
should not enable the whitelist when an IOMMU is present.
Link: https://lore.kernel.org/linux-pci/20190522201252.2997-1-logang@deltatee.com/ Fixes: 0f97da831026 ("PCI/P2PDMA: Allow P2P DMA between any devices under AMD ZEN Root Complex") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Christoph Hellwig <hch@lst.de>
There was an unused variable 'mvpp2_dbgfs_prs_pmap_fops'
Added a usage consistent with other fops to dump pmap
to userspace.
Cc: clang-built-linux@googlegroups.com Link: https://github.com/ClangBuiltLinux/linux/issues/529 Signed-off-by: Nathan Huckleberry <nhuck@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Wed, 19 Jun 2019 17:50:24 +0000 (10:50 -0700)]
ipv6: Default fib6_type to RTN_UNICAST when not set
A user reported that routes are getting installed with type 0 (RTN_UNSPEC)
where before the routes were RTN_UNICAST. One example is from accel-ppp
which apparently still uses the ioctl interface and does not set
rtmsg_type. Another is the netlink interface where ipv6 does not require
rtm_type to be set (v4 does). Prior to the commit in the Fixes tag the
ipv6 stack converted type 0 to RTN_UNICAST, so restore that behavior.
Fixes: e8478e80e5a7 ("net/ipv6: Save route type in rt6_info") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
I spent a few cycles on transmit problems for af_iucv over regular
netdevices - please apply the following fixes to -net.
The first patch allows for skb allocations outside of GFP_DMA, while the
second patch respects that drivers might use skb_cow_head() and/or want
additional dev->needed_headroom.
Patch 3 is for a separate issue, where we didn't setup some of the
netdevice-specific infrastructure when running as a z/VM guest.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Tue, 18 Jun 2019 18:43:01 +0000 (20:43 +0200)]
net/af_iucv: always register net_device notifier
Even when running as VM guest (ie pr_iucv != NULL), af_iucv can still
open HiperTransport-based connections. For robust operation these
connections require the af_iucv_netdev_notifier, so register it
unconditionally.
Also handle any error that register_netdevice_notifier() returns.
Fixes: 9fbd87d41392 ("af_iucv: handle netdev events") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Tue, 18 Jun 2019 18:43:00 +0000 (20:43 +0200)]
net/af_iucv: build proper skbs for HiperTransport
The HiperSockets-based transport path in af_iucv is still too closely
entangled with qeth.
With commit a647a02512ca ("s390/qeth: speed-up L3 IQD xmit"), the
relevant xmit code in qeth has begun to use skb_cow_head(). So to avoid
unnecessary skb head expansions, af_iucv must learn to
1) respect dev->needed_headroom when allocating skbs, and
2) drop the header reference before cloning the skb.
While at it, also stop hard-coding the LL-header creation stage and just
use the appropriate helper.
Fixes: a647a02512ca ("s390/qeth: speed-up L3 IQD xmit") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Tue, 18 Jun 2019 18:42:59 +0000 (20:42 +0200)]
net/af_iucv: remove GFP_DMA restriction for HiperTransport
af_iucv sockets over z/VM IUCV require that their skbs are allocated
in DMA memory. This restriction doesn't apply to connections over
HiperSockets. So only set this limit for z/VM IUCV sockets, thereby
increasing the likelihood that the large (and linear!) allocations for
HiperTransport messages succeed.
Fixes: 3881ac441f64 ("af_iucv: add HiperSockets transport") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 19 Jun 2019 18:44:04 +0000 (11:44 -0700)]
Merge tag 'pm-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Prevent PCI bridges in general (and PCIe ports in particular) from
being put into low-power states during system-wide suspend transitions
if there are any devices in D0 below them and refine the handling of
PCI devices in D0 during suspend-to-idle cycles"
* tag 'pm-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PCI: PM: Skip devices in D0 for suspend-to-idle