empty_child_inc/dec() use the ternary operator for conditional
operations. The conditions involve the post/pre in/decrement
operator and the operation is only performed when the condition
is *not* true. This is hard to parse for humans, use a regular
'if' construct instead and perform the in/decrement separately.
This also fixes two warnings that are emitted about the value
of the ternary expression being unused, when building the kernel
with clang + "kbuild: Remove unnecessary -Wno-unused-value"
(https://lore.kernel.org/patchwork/patch/1089869/):
CC net/ipv4/fib_trie.o
net/ipv4/fib_trie.c:351:2: error: expression result unused [-Werror,-Wunused-value]
++tn_info(n)->empty_children ? : ++tn_info(n)->full_children;
Fixes: 95f60ea3e99a ("fib_trie: Add collapse() and should_collapse() to resize") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
inet: fix defrag units dismantle races
This series add a new pre_exit() method to struct pernet_operations
to solve a race in defrag units dismantle, without adding extra
delays to netns dismantles.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 18 Jun 2019 18:09:00 +0000 (11:09 -0700)]
inet: fix various use-after-free in defrags units
syzbot reported another issue caused by my recent patches. [1]
The issue here is that fqdir_exit() is initiating a work queue
and immediately returns. A bit later cleanup_net() was able
to free the MIB (percpu data) and the whole struct net was freed,
but we had active frag timers that fired and triggered use-after-free.
We need to make sure that timers can catch fqdir->dead being set,
to bailout.
Since RCU is used for the reader side, this means
we want to respect an RCU grace period between these operations :
1) qfdir->dead = 1;
2) netns dismantle (freeing of various data structure)
This patch uses new new (struct pernet_operations)->pre_exit
infrastructure to ensures a full RCU grace period
happens between fqdir_pre_exit() and fqdir_exit()
This also means we can use a regular work queue, we no
longer need rcu_work.
Tested:
$ time for i in {1..1000}; do unshare -n /bin/false;done
real 0m2.585s
user 0m0.160s
sys 0m2.214s
[1]
BUG: KASAN: use-after-free in ip_expire+0x73e/0x800 net/ipv4/ip_fragment.c:152
Read of size 8 at addr ffff88808b9fe330 by task syz-executor.4/11860
Fixes: 3c8fc8782044 ("inet: frags: rework rhashtable dismantle") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
xdp: page_pool fixes and in-flight accounting
This patchset fix page_pool API and users, such that drivers can use it for
DMA-mapping. A number of places exist, where the DMA-mapping would not get
released/unmapped, all these are fixed. This occurs e.g. when an xdp_frame
gets converted to an SKB. As network stack doesn't have any callback for XDP
memory models.
The patchset also address a shutdown race-condition. Today removing a XDP
memory model, based on page_pool, is only delayed one RCU grace period. This
isn't enough as redirected xdp_frames can still be in-flight on different
queues (remote driver TX, cpumap or veth).
We stress that when drivers use page_pool for DMA-mapping, then they MUST
use one packet per page. This might change in the future, but more work lies
ahead, before we can lift this restriction.
This patchset change the page_pool API to be more strict, as in-flight page
accounting is added.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
For DMA mapping use-case the page_pool keeps a pointer
to the struct device, which is used in DMA map/unmap calls.
For our in-flight handling, we also need to make sure that
the struct device have not disappeared. This is assured
via using get_device/put_device API.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reported-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
page_pool: add tracepoints for page_pool with details need by XDP
The xdp tracepoints for mem id disconnect don't carry information about, why
it was not safe_to_remove. The tracepoint page_pool:page_pool_inflight in
this patch can be used for extract this info for further debugging.
This patchset also adds tracepoint for the pages_state_* release/hold
transitions, including a pointer to the page. This can be used for stats
about in-flight pages, or used to debug page leakage via keeping track of
page pointer and combining this with kprobe for __put_page().
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
These tracepoints make it easier to troubleshoot XDP mem id disconnect.
The xdp:mem_disconnect tracepoint cannot be replaced via kprobe. It is
placed at the last stable place for the pointer to struct xdp_mem_allocator,
just before it's scheduled for RCU removal. It also extract info on
'safe_to_remove' and 'force'.
Detailed info about in-flight pages is not available at this layer. The next
patch will added tracepoints needed at the page_pool layer for this.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
xdp: force mem allocator removal and periodic warning
If bugs exists or are introduced later e.g. by drivers misusing the API,
then we want to warn about the issue, such that developer notice. This patch
will generate a bit of noise in form of periodic pr_warn every 30 seconds.
It is not nice to have this stall warning running forever. Thus, this patch
will (after 120 attempts) force disconnect the mem id (from the rhashtable)
and free the page_pool object. This will cause fallback to the put_page() as
before, which only potentially leak DMA-mappings, if objects are really
stuck for this long. In that unlikely case, a WARN_ONCE should show us the
call stack.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
xdp: tracking page_pool resources and safe removal
This patch is needed before we can allow drivers to use page_pool for
DMA-mappings. Today with page_pool and XDP return API, it is possible to
remove the page_pool object (from rhashtable), while there are still
in-flight packet-pages. This is safely handled via RCU and failed lookups in
__xdp_return() fallback to call put_page(), when page_pool object is gone.
In-case page is still DMA mapped, this will result in page note getting
correctly DMA unmapped.
To solve this, the page_pool is extended with tracking in-flight pages. And
XDP disconnect system queries page_pool and waits, via workqueue, for all
in-flight pages to be returned.
To avoid killing performance when tracking in-flight pages, the implement
use two (unsigned) counters, that in placed on different cache-lines, and
can be used to deduct in-flight packets. This is done by mapping the
unsigned "sequence" counters onto signed Two's complement arithmetic
operations. This is e.g. used by kernel's time_after macros, described in
kernel commit 1ba3aab3033b and 5a581b367b5, and also explained in RFC1982.
The trick is these two incrementing counters only need to be read and
compared, when checking if it's safe to free the page_pool structure. Which
will only happen when driver have disconnected RX/alloc side. Thus, on a
non-fast-path.
It is chosen that page_pool tracking is also enabled for the non-DMA
use-case, as this can be used for statistics later.
After this patch, using page_pool requires more strict resource "release",
e.g. via page_pool_release_page() that was introduced in this patchset, and
previous patches implement/fix this more strict requirement.
Drivers no-longer call page_pool_destroy(). Drivers already call
xdp_rxq_info_unreg() which call xdp_rxq_info_unreg_mem_model(), which will
attempt to disconnect the mem id, and if attempt fails schedule the
disconnect for later via delayed workqueue.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
The mlx5 driver is using page_pool, but not for DMA-mapping (currently), and
is a little too relaxed about returning or releasing page resources, as it
is not strictly necessary, when not using DMA-mappings.
As this patchset is working towards tracking page_pool resources, to know
about in-flight frames on shutdown. Then fix places where mlx5 leak
page_pool resource.
In case of dma_mapping_error, then recycle into page_pool.
In mlx5e_free_rq() moved the page_pool_destroy() call to after the
mlx5e_page_release() calls, as it is more correct.
In mlx5e_page_release() when no recycle was requested, then release page
from the page_pool, via page_pool_release_page().
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
page_pool: introduce page_pool_free and use in mlx5
In case driver fails to register the page_pool with XDP return API (via
xdp_rxq_info_reg_mem_model()), then the driver can free the page_pool
resources more directly than calling page_pool_destroy(), which does a
unnecessarily RCU free procedure.
This patch is preparing for removing page_pool_destroy(), from driver
invocation.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When converting an xdp_frame into an SKB, and sending this into the network
stack, then the underlying XDP memory model need to release associated
resources, because the network stack don't have callbacks for XDP memory
models. The only memory model that needs this is page_pool, when a driver
use the DMA-mapping feature.
Introduce page_pool_release_page(), which basically does the same as
page_pool_unmap_page(). Add xdp_release_frame() as the XDP memory model
interface for calling it, if the memory model match MEM_TYPE_PAGE_POOL, to
save the function call overhead for others. Have cpumap call
xdp_release_frame() before xdp_scrub_frame().
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
xdp: fix leak of IDA cyclic id if rhashtable_insert_slow fails
Fix error handling case, where inserting ID with rhashtable_insert_slow
fails in xdp_rxq_info_reg_mem_model, which leads to never releasing the IDA
ID, as the lookup in xdp_rxq_info_unreg_mem_model fails and thus
ida_simple_remove() is never called.
Fix by releasing ID via ida_simple_remove(), and mark xdp_rxq->mem.id with
zero, which is already checked in xdp_rxq_info_unreg_mem_model().
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Ilias Apalodimas [Tue, 18 Jun 2019 13:05:17 +0000 (15:05 +0200)]
net: page_pool: add helper function to unmap dma addresses
On a previous patch dma addr was stored in 'struct page'.
Use that to unmap DMA addresses used by network drivers
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ilias Apalodimas [Tue, 18 Jun 2019 13:05:12 +0000 (15:05 +0200)]
net: page_pool: add helper function to retrieve dma addresses
On a previous patch dma addr was stored in 'struct page'.
Use that to retrieve DMA addresses used by network drivers
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ilias Apalodimas [Wed, 19 Jun 2019 10:04:01 +0000 (13:04 +0300)]
net: netsec: remove loops in napi Rx process
netsec_process_rx was running in a loop trying to process as many packets
as possible before re-enabling interrupts. With the recent DMA changes
this is not needed anymore as we manage to consume all the budget without
looping over the function.
Since it has no performance penalty let's remove that and simplify the Rx
path a bit
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Ilias Apalodimas [Wed, 19 Jun 2019 10:04:00 +0000 (13:04 +0300)]
net: netsec: initialize tx ring on ndo_open
Since we changed the Tx ring handling and now depends on bit31 to figure
out the owner of the descriptor, we should initialize this every time
the device goes down-up instead of doing it once on driver init. If the
value is not correctly initialized the device won't have any available
descriptors
Changes since v1:
- Typo fixes
Fixes: 35e07d234739 ("net: socionext: remove mmio reads on Tx") Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Rasmus Villemoes [Wed, 19 Jun 2019 10:02:38 +0000 (10:02 +0000)]
net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6250_g1_vtu_loadpurge()
The comment is correct, but the code ends up moving the bits four
places too far, into the VTUOp field.
Fixes: bec8e5725281 (net: dsa: mv88e6xxx: implement vtu_getnext and vtu_loadpurge for mv88e6250) Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
In case of using shared block, user might find it handy to be able to insert
filters to match on particular ingress device. This patchset exposes the
ingress ifindex through flow_dissector and flow_offload so mlxsw can use it to
push down to HW. See the selftests for examples of usage.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Wed, 19 Jun 2019 06:41:09 +0000 (09:41 +0300)]
selftests: tc: add ingress device matching support
Extend tc_flower to test plain ingress device matching and also
tc_shblock to test ingress device matching on shared block.
Add new tc_flower_router.sh where ingress device matching on egress
(after routing) is done.
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Wed, 19 Jun 2019 06:41:06 +0000 (09:41 +0300)]
mlxsw: spectrum_acl: Avoid size check for RX_ACL_SYSTEM_PORT element
RX_ACL_SYSTEM_PORT is 8 bit but SRC_SYS_PORT is 16 bits. Internally,
SRC_SYS_PORT is used to carry the value. Relax the checker in case of
RX_ACL_SYSTEM_PORT and allow different size.
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Wed, 19 Jun 2019 06:41:05 +0000 (09:41 +0300)]
mlxsw: spectrum_acl: Write RX_ACL_SYSTEM_PORT acl element correctly
RX_ACL_SYSTEM_PORT is equal to SRC_SYS_PORT - 1. So before write to
block we need to adjust the key value. Introduce new "EXT" helper to
implement this.
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Wed, 19 Jun 2019 06:41:02 +0000 (09:41 +0300)]
flow_dissector: add support for ingress ifindex dissection
Add new key meta that contains ingress ifindex value and add a function
to dissect this from skb. The key and function is prepared to cover
other potential skb metadata values dissection.
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Tue, 18 Jun 2019 15:15:10 +0000 (16:15 +0100)]
net/mlx5: add missing void argument to function mlx5_devlink_alloc
Function mlx5_devlink_alloc is missing a void argument, add it
to clean up the non-ANSI function declaration.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: mvpp2: cls: Allow steering based on vlan tag
The PPv2 classifier can perform flow steering based on keys extracted
from the VLAN tag. This series adds support for using the vlan id and
the vlan prio as keys, using the ethtool interface.
Patch 1 is a preparatory patch that prevent false-positive matches,
using a dedicated lookup id for the RSS C2 lookup.
Patch 2 allows to separate the flows based on the header fields they
contain. The main goal is to be able to separate tagged traffic from
untagged traffic for flow steering, just as we already do for RSS.
Patch 3 solves an issue we have when extracting fields that aren't full
bytes, such as the vlan tag which is 12 bits wide, or the priority which
is 3 bits wide.
Finally, patch 4 adds support for steering based on both vlan id and
priority, extracted from the outermost tag.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net: mvpp2: cls: Add steering based on vlan Id and priority.
This commit allows using the vlan Id and priority as parts of the key
for classification offload. These fields are extracted from the
outermost tag, if multiple tags are present.
Vlan Id and priority are considered as 2 different fields by the
classifier, however the fields are both appended in the Header Extracted
Key in the same layout as they are found in the tags. This means that
when steering only based on the prio, a 16-bit slot is still taken in
the HEK.
The classifier doesn't allow extracting the DEI bit from the tag, so we
explicitly prevent user from using this bit in the key.
This commit adds the vlan priotity as a compatible HEK field for
tagged traffic, meaning that we limit the possibility of extracting this
field only to the flows that contain tagged traffic.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The C2 TCAM used for classification uses a key (Header Extracted Key)
built by concatenating several fields extracted from the packet header.
After a lot of trial-and-error and some guess work, it seems the HEK is
right justified, with the first fields being stored in the MSB, then
concatenated up until the LSB.
Until now, this doesn't cause any issue since all HEK fields we use are
full bytes. However this is an issue for the upcoming VLAN id and pri
extraction, which aren't full bytes.
Rework the way we built that TCAM key, by changing the order in which we
append the fields.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: mvpp2: cls: Only select applicable flows of classification offload
The way we currently handle classification offload and RSS is by having
dedicated lookup sequences in the flow table, each being selected
depending on several fields being present in the packet header.
We need to make sure the classification operation we want to perform can
be done in each flow we want to insert it into. As an example,
classifying on VLAN tag can only be done on flows used for tagged
traffic.
This commit makes sure we don't insert rules in flows we aren't
compatible with.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: mvpp2: cls: Use a dedicated lu_type for the RSS lookup
When performing a TCAM lookup in the C2 engine, it's possible that
multiple entries match the packet. To make sure the correct entry match
when performing a lookup, the Flow Table can set a lookup type, which
will be used in the TCAM lookup, thus preventing such false-positives.
We need to make sure the RSS match doesn't interfere with other
classification lookups, hence we use a dedicated lookup_type for it.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 19 Jun 2019 02:02:27 +0000 (22:02 -0400)]
Merge branch 'macb-SiFive-FU540-C000'
Yash Shah says:
====================
Add macb support for SiFive FU540-C000
On FU540, the management IP block is tightly coupled with the Cadence
MACB IP block. It manages many of the boundary signals from the MACB IP
This patchset controls the tx_clk input signal to the MACB IP. It
switches between the local TX clock (125MHz) and PHY TX clocks. This
is necessary to toggle between 1Gb and 100/10Mb speeds.
Future patches may add support for monitoring or controlling other IP
boundary signals.
This patchset is mostly based on work done by
Wesley Terpstra <wesley@sifive.com>
This patchset is based on Linux v5.2-rc1 and tested on HiFive Unleashed
board with additional board related patches needed for testing can be
found at dev/yashs/ethernet_v3 branch of:
https://github.com/yashshah7/riscv-linux.git
Change History:
V3:
- Revert "MACB_SIFIVE_FU540" config changes in Kconfig and driver code.
The driver does not depend on SiFive GPIO driver.
V2:
- Change compatible string from "cdns,fu540-macb" to "sifive,fu540-macb"
- Add "MACB_SIFIVE_FU540" in Kconfig to support SiFive FU540 in macb
driver. This is needed because on FU540, the macb driver depends on
SiFive GPIO driver.
- Avoid writing the result of a comparison to a register.
- Fix the issue of probe fail on reloading the module reported by:
Andreas Schwab <schwab@suse.de>
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yash Shah [Tue, 18 Jun 2019 07:56:08 +0000 (13:26 +0530)]
macb: Add support for SiFive FU540-C000
The management IP block is tightly coupled with the Cadence MACB IP
block on the FU540, and manages many of the boundary signals from the
MACB IP. This patch only controls the tx_clk input signal to the MACB
IP. Future patches may add support for monitoring or controlling other
IP boundary signals.
Signed-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yash Shah [Tue, 18 Jun 2019 07:56:07 +0000 (13:26 +0530)]
macb: bindings doc: add sifive fu540-c000 binding
Add the compatibility string documentation for SiFive FU540-C0000
interface.
On the FU540, this driver also needs to read and write registers in a
management IP block that monitors or drives boundary signals for the
GEMGXL IP block that are not directly mapped to GEMGXL registers.
Therefore, add additional range to "reg" property for SiFive GEMGXL
management IP registers.
Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
hinic: add rss support and rss parameters configuration
This series add rss support for HINIC driver and implement the ethtool
interface related to rss parameter configuration. user can use ethtool
configure rss parameters or show rss parameters.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Xue Chaojing [Tue, 18 Jun 2019 06:20:53 +0000 (06:20 +0000)]
hinic: add support for rss parameters with ethtool
This patch adds support rss parameters with ethtool,
user can change hash key, hash indirection table, hash
function by ethtool -X, and show rss parameters by ethtool -x.
Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Mon, 17 Jun 2019 16:58:36 +0000 (17:58 +0100)]
net: stmmac: add sanity check to device_property_read_u32_array call
Currently the call to device_property_read_u32_array is not error checked
leading to potential garbage values in the delays array that are then used
in msleep delays. Add a sanity check to the property fetching.
Addresses-Coverity: ("Uninitialized scalar variable") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Mon, 17 Jun 2019 13:04:49 +0000 (15:04 +0200)]
qed: Fix -Wmaybe-uninitialized false positive
A previous attempt to shut up the uninitialized variable use
warning was apparently insufficient. When CONFIG_PROFILE_ANNOTATED_BRANCHES
is set, gcc-8 still warns, because the unlikely() check in DP_NOTICE()
causes it to no longer track the state of all variables correctly:
drivers/net/ethernet/qlogic/qed/qed_dev.c: In function 'qed_llh_set_ppfid_affinity':
drivers/net/ethernet/qlogic/qed/qed_dev.c:798:47: error: 'abs_ppfid' may be used uninitialized in this function [-Werror=maybe-uninitialized]
addr = NIG_REG_PPF_TO_ENGINE_SEL + abs_ppfid * 0x4;
~~~~~~~~~~^~~~~
This is not a nice workaround, but always initializing the output from
qed_llh_abs_ppfid() at least shuts up the false positive reliably.
Fixes: 79284adeb99e ("qed: Add llh ppfid interface and 100g support for offload protocols") Fixes: 8e2ea3ea9625 ("qed: Fix static checker warning") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis Kirjanov [Mon, 17 Jun 2019 08:53:41 +0000 (10:53 +0200)]
ipoib: show VF broadcast address
in IPoIB case we can't see a VF broadcast address for but
can see for PF
Before:
11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 256
link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 MAC 14:80:00:00:66:fe, spoof checking off, link-state disable,
trust off, query_rss off
...
After:
11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 256
link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof
checking off, link-state disable, trust off, query_rss off
v1->v2: add the IFLA_VF_BROADCAST constant
v2->v3: put IFLA_VF_BROADCAST at the end
to avoid KABI breakage and set NLA_REJECT
dev_setlink
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Acked-by: Doug Ledford <dledford@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis Kirjanov [Mon, 17 Jun 2019 08:53:40 +0000 (10:53 +0200)]
ipoib: correcly show a VF hardware address
in the case of IPoIB with SRIOV enabled hardware
ip link show command incorrecly prints
0 instead of a VF hardware address.
Before:
11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 256
link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 MAC 00:00:00:00:00:00, spoof checking off, link-state disable,
trust off, query_rss off
...
After:
11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 256
link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof
checking off, link-state disable, trust off, query_rss off
v1->v2: just copy an address without modifing ifla_vf_mac
v2->v3: update the changelog
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Acked-by: Doug Ledford <dledford@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Unlike IPv4, an IPv6 multipath route in the kernel is composed from
multiple sibling routes, each representing a single nexthop.
Therefore, an addition of a multipath route with N nexthops translates
to N in-kernel notifications. This is inefficient for device drivers
that need to program the route to the underlying device. Each time a new
nexthop is appended, a new nexthop group needs to be constructed and the
old one deleted.
This patchset improves the situation by sending a single notification
for a multipath route addition / deletion instead of one per-nexthop.
When adding thousands of multipath routes with 16 nexthops, I measured
an improvement of about x10 in the insertion rate.
Patches #1-#3 add a flag that indicates that in-kernel notifications
need to be suppressed and extend the IPv6 FIB notification info with
information about the number of sibling routes that are being notified.
Patches #4-#5 adjust the two current listeners to these notifications to
ignore notifications about IPv6 multipath routes.
Patch #15 finally removes the limitations added in patches #4-#5 and
stops the kernel from sending a notification for each added / deleted
nexthop.
Patch #16 adds test cases.
v2 (David Ahern):
* Remove patch adjusting netdevsim to consume resources for each
fib6_info. Instead, consume one resource for the entire multipath
route
* Remove 'multipath_rt' usage in patch #10
* Remove 'multipath_rt' from 'struct fib6_entry_notifier_info' in patch
#15. The member is only removed in this patch to prevent drivers from
processing multipath routes twice during the series
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 18 Jun 2019 15:12:57 +0000 (18:12 +0300)]
ipv6: Stop sending in-kernel notifications for each nexthop
Both listeners - mlxsw and netdevsim - of IPv6 FIB notifications are now
ready to handle IPv6 multipath notifications.
Therefore, stop ignoring such notifications in both drivers and stop
sending notification for each added / deleted nexthop.
v2:
* Remove 'multipath_rt' from 'struct fib6_entry_notifier_info'
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 18 Jun 2019 15:12:54 +0000 (18:12 +0300)]
mlxsw: spectrum_router: Pass array of routes to route handling functions
Prepare the driver to handle multiple routes in a single notification by
passing an array of routes to the functions that actually add / delete a
route.
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 18 Jun 2019 15:12:53 +0000 (18:12 +0300)]
mlxsw: spectrum_router: Adjust IPv6 replace logic to new notifications
Previously, IPv6 replace notifications were only sent from
fib6_add_rt2node(). The function only emitted such notifications if a
route actually replaced another route.
A previous patch added another call site in ip6_route_multipath_add()
from which such notification can be emitted even if a route was merely
added and did not replace another route.
Adjust the driver to take this into account and potentially set the
'replace' flag to 'false' if the notified route did not replace an
existing route.
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 18 Jun 2019 15:12:51 +0000 (18:12 +0300)]
mlxsw: spectrum_router: Prepare function to return errors
The function mlxsw_sp_router_fib6_event() takes care of preparing the
needed information for the work item that actually inserts the route
into the device.
When processing an IPv6 multipath route, the function will need to
allocate an array to store pointers to all the sibling routes.
Change the function's signature to return an error code and adjust the
single call site.
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 18 Jun 2019 15:12:49 +0000 (18:12 +0300)]
ipv6: Add IPv6 multipath notification for route delete
If all the nexthops of a multipath route are being deleted, send one
notification for the entire route, instead of one per-nexthop.
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 18 Jun 2019 15:12:48 +0000 (18:12 +0300)]
ipv6: Add IPv6 multipath notifications for add / replace
Emit a notification when a multipath routes is added or replace.
Note that unlike the replace notifications sent from fib6_add_rt2node(),
it is possible we are sending a 'FIB_EVENT_ENTRY_REPLACE' when a route
was merely added and not replaced.
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 18 Jun 2019 15:12:45 +0000 (18:12 +0300)]
ipv6: Extend notifier info for multipath routes
Extend the IPv6 FIB notifier info with number of sibling routes being
notified.
This will later allow listeners to process one notification for a
multipath routes instead of N, where N is the number of nexthops.
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 18 Jun 2019 15:12:44 +0000 (18:12 +0300)]
netlink: Add field to skip in-kernel notifications
The struct includes a 'skip_notify' flag that indicates if netlink
notifications to user space should be suppressed. As explained in commit 3b1137fe7482 ("net: ipv6: Change notifications for multipath add to
RTA_MULTIPATH"), this is useful to suppress per-nexthop RTM_NEWROUTE
notifications when an IPv6 multipath route is added / deleted. Instead,
one notification is sent for the entire multipath route.
This concept is also useful for in-kernel notifications. Sending one
in-kernel notification for the addition / deletion of an IPv6 multipath
route - instead of one per-nexthop - provides a significant increase in
the insertion / deletion rate to underlying devices.
Add a 'skip_notify_kernel' flag to suppress in-kernel notifications.
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 18 Jun 2019 15:12:43 +0000 (18:12 +0300)]
netlink: Document all fields of 'struct nl_info'
Some fields were not documented. Add documentation.
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 18 Jun 2019 16:33:15 +0000 (09:33 -0700)]
Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2019-06-17
This series contains updates to the iavf driver only.
Akeem updates the driver to change how VLAN tags are being populated and
programmed into the hardware by starting from the first member of the
list until the number of allowed VLAN tags is exhausted.
Mitch fixed the variable type since the variable counter starts out
negative and climbs to zero, so use a signed integer instead of
unsigned. Also increase the timeout to avoid erroneous errors. Fixed
the driver to be able to handle when the hardware hands us a null
receive descriptor with no data attached, yet is still valid.
Aleksandr fixes the driver to use GFP_ATOMIC when allocating memory in
atomic context.
Avinash updates the driver to fix a calculation error in virtchnl
regarding the valid length.
Jakub does some refactoring of the commands processing the watchdog
state machine to reduce the length and complexity of the function. Also
decalre watchdog task as delayed work and use a dedicated work queue to
service the driver tasks.
Paul updated the iavf_process_aq_command to call the necessary functions
to be able to clear cloud filter bits that need to be cleared.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Shalom Toledo [Tue, 18 Jun 2019 12:45:35 +0000 (12:45 +0000)]
mlxsw: spectrum_ptp: Fix compilation on 32-bit ARM
Compilation on 32-bit ARM fails after commit 992aa864dca0 ("mlxsw:
spectrum_ptp: Add implementation for physical hardware clock operations")
because of 64-bit division:
arm-linux-gnueabi-ld:
drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.o: in function
`mlxsw_sp1_ptp_phc_settime': spectrum_ptp.c:(.text+0x39c): undefined
reference to `__aeabi_uldivmod'
Fix by using div_u64().
Fixes: 992aa864dca0 ("mlxsw: spectrum_ptp: Add implementation for physical hardware clock operations") Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 17 Jun 2019 23:30:38 +0000 (16:30 -0700)]
Merge branch 'UDP-GSO-audit-tests'
Fred Klassen says:
====================
UDP GSO audit tests
Updates to UDP GSO selftests ot optionally stress test CMSG
subsytem, and report the reliability and performance of both
TX Timestamping and ZEROCOPY messages.
====================
Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Errors are thrown if CMSG count does not equal send count,
example:
Summary over 4.000 seconds...
sum tcp tx: 7451 MB/s 493706 calls (123426/s) 493706 msgs (123426/s)
./udpgso_bench_tx: Unexpected number of Zerocopy completions: 493706 expected 493704 received
Also reduce individual test time from 4 to 3 seconds so that
overall test time does not increase significantly.
v3: Enhancements as per Willem de Bruijn <willemb@google.com>
- document -P option for TCP audit
Signed-off-by: Fred Klassen <fklassen@appneta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fred Klassen [Mon, 17 Jun 2019 19:08:35 +0000 (12:08 -0700)]
net/udpgso_bench_tx: options to exercise TX CMSG
This enhancement adds options that facilitate load testing with
additional TX CMSG options, and to optionally print results of
various send CMSG operations.
These options are especially useful in isolating situations
where error-queue messages are lost when combined with other
CMSG operations (e.g. SO_ZEROCOPY).
New options:
-a - count all CMSG messages and match to sent messages
-T - add TX CMSG that requests TX software timestamps
-H - similar to -T except request TX hardware timestamps
-P - call poll() before reading error queue
-v - print detailed results
v2: Enhancements as per Willem de Bruijn <willemb@google.com>
- Updated control and buffer parameters for recvmsg
- poll() parameter cleanup
- fail on bad audit results
- remove TOS options
- improved reporting
v3: Enhancements as per Willem de Bruijn <willemb@google.com>
- add SOF_TIMESTAMPING_OPT_TSONLY to eliminate MSG_TRUNC
- general code cleanup
Signed-off-by: Fred Klassen <fklassen@appneta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 17 Jun 2019 23:28:28 +0000 (16:28 -0700)]
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"MS_MOVE regression fix + breakage in fsmount(2) (also introduced in
this cycle, along with fsmount(2) itself).
I'm still digging through the piles of mail, so there might be more
fixes to follow, but these two are obvious and self-contained, so
there's no point delaying those..."
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs/namespace: fix unprivileged mount propagation
vfs: fsmount: add missing mntget()
Florian Westphal [Mon, 17 Jun 2019 14:02:28 +0000 (16:02 +0200)]
selftests: rtnetlink: add addresses with fixed life time
This exercises kernel code path that deal with addresses that have
a limited lifetime.
Without previous fix, this triggers following crash on net-next:
BUG: KASAN: null-ptr-deref in check_lifetime+0x403/0x670
Read of size 8 at addr 0000000000000010 by task kworker [..]
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Mon, 17 Jun 2019 14:02:27 +0000 (16:02 +0200)]
net: ipv4: remove erroneous advancement of list pointer
Causes crash when lifetime expires on an adress as garbage is
dereferenced soon after.
This used to look like this:
for (ifap = &ifa->ifa_dev->ifa_list;
*ifap != NULL; ifap = &(*ifap)->ifa_next) {
if (*ifap == ifa) ...
but this was changed to:
struct in_ifaddr *tmp;
ifap = &ifa->ifa_dev->ifa_list;
tmp = rtnl_dereference(*ifap);
while (tmp) {
tmp = rtnl_dereference(tmp->ifa_next); // Bogus
if (rtnl_dereference(*ifap) == ifa) {
...
ifap = &tmp->ifa_next; // Can be NULL
tmp = rtnl_dereference(*ifap); // Dereference
}
}
Remove the bogus assigment/list entry skip.
Fixes: 2638eb8b50cf ("net: ipv4: provide __rcu annotation for ifa_list") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Mon, 17 Jun 2019 13:14:10 +0000 (15:14 +0200)]
net: dsa: sja1105: fix ptp link error
Due to a reversed dependency, it is possible to build
the lower ptp driver as a loadable module and the actual
driver using it as built-in, causing a link error:
drivers/net/dsa/sja1105/sja1105_spi.o: In function `sja1105_static_config_upload':
sja1105_spi.c:(.text+0x6f0): undefined reference to `sja1105_ptp_reset'
drivers/net/dsa/sja1105/sja1105_spi.o:(.data+0x2d4): undefined reference to `sja1105et_ptp_cmd'
drivers/net/dsa/sja1105/sja1105_spi.o:(.data+0x604): undefined reference to `sja1105pqrs_ptp_cmd'
drivers/net/dsa/sja1105/sja1105_main.o: In function `sja1105_remove':
sja1105_main.c:(.text+0x8d4): undefined reference to `sja1105_ptp_clock_unregister'
drivers/net/dsa/sja1105/sja1105_main.o: In function `sja1105_rxtstamp_work':
sja1105_main.c:(.text+0x964): undefined reference to `sja1105_tstamp_reconstruct'
drivers/net/dsa/sja1105/sja1105_main.o: In function `sja1105_setup':
sja1105_main.c:(.text+0xb7c): undefined reference to `sja1105_ptp_clock_register'
drivers/net/dsa/sja1105/sja1105_main.o: In function `sja1105_port_deferred_xmit':
sja1105_main.c:(.text+0x1fa0): undefined reference to `sja1105_ptpegr_ts_poll'
sja1105_main.c:(.text+0x1fc4): undefined reference to `sja1105_tstamp_reconstruct'
drivers/net/dsa/sja1105/sja1105_main.o:(.rodata+0x5b0): undefined reference to `sja1105_get_ts_info'
Change the Makefile logic to always build the ptp module
the same way as the rest. Another option would be to
just add it to the same module and remove the exports,
but I don't know if there was a good reason to keep them
separate.
Fixes: bb77f36ac21d ("net: dsa: sja1105: Add support for the PTP clock") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Mon, 17 Jun 2019 13:13:03 +0000 (15:13 +0200)]
net: stmmac: fix unused-variable warning
When building without CONFIG_OF, we get a harmless build warning:
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c: In function 'stmmac_phy_setup':
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:973:22: error: unused variable 'node' [-Werror=unused-variable]
struct device_node *node = priv->plat->phy_node;
Reword it so we always use the local variable, by making it the
fwnode pointer instead of the device_node.
Fixes: 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
"Lots of bug fixes here:
1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer.
2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John
Crispin.
3) Use after free in psock backlog workqueue, from John Fastabend.
4) Fix source port matching in fdb peer flow rule of mlx5, from Raed
Salem.
5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet.
6) Network header needs to be set for packet redirect in nfp, from
John Hurley.
7) Fix udp zerocopy refcnt, from Willem de Bruijn.
8) Don't assume linear buffers in vxlan and geneve error handlers,
from Stefano Brivio.
9) Fix TOS matching in mlxsw, from Jiri Pirko.
10) More SCTP cookie memory leak fixes, from Neil Horman.
11) Fix VLAN filtering in rtl8366, from Linus Walluij.
12) Various TCP SACK payload size and fragmentation memory limit fixes
from Eric Dumazet.
13) Use after free in pneigh_get_next(), also from Eric Dumazet.
14) LAPB control block leak fix from Jeremy Sowden"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits)
lapb: fixed leak of control-blocks.
tipc: purge deferredq list for each grp member in tipc_group_delete
ax25: fix inconsistent lock state in ax25_destroy_timer
neigh: fix use-after-free read in pneigh_get_next
tcp: fix compile error if !CONFIG_SYSCTL
hv_sock: Suppress bogus "may be used uninitialized" warnings
be2net: Fix number of Rx queues used for flow hashing
net: handle 802.1P vlan 0 packets properly
tcp: enforce tcp_min_snd_mss in tcp_mtu_probing()
tcp: add tcp_min_snd_mss sysctl
tcp: tcp_fragment() should apply sane memory limits
tcp: limit payload size of sacked skbs
Revert "net: phylink: set the autoneg state in phylink_phy_change"
bpf: fix nested bpf tracepoints with per-cpu data
bpf: Fix out of bounds memory access in bpf_sk_storage
vsock/virtio: set SOCK_DONE on peer shutdown
net: dsa: rtl8366: Fix up VLAN filtering
net: phylink: set the autoneg state in phylink_phy_change
net: add high_order_alloc_disable sysctl/static key
tcp: add tcp_tx_skb_cache sysctl
...
Mitch Williams [Tue, 14 May 2019 17:37:09 +0000 (10:37 -0700)]
iavf: allow null RX descriptors
In some circumstances, the hardware can hand us a null receive
descriptor, with no data attached but otherwise valid. Unfortunately,
the driver was ill-equipped to handle such an event, and would stop
processing packets at that point.
To fix this, use the Descriptor Done bit instead of the size to
determine whether or not a descriptor is ready to be processed. Add some
checks to allow for unused buffers.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Paul Greenwalt [Tue, 14 May 2019 17:37:08 +0000 (10:37 -0700)]
iavf: add call to iavf_[add|del]_cloud_filter
Add call to iavf_add_cloud_filter and iavf_del_cloud_filter from
iavf_process_aq_command to clear aq_required
IAVF_FLAG_AQ_ADD_CLOUD_FILTER and IAVF_FLAG_AQ_DEL_CLOUD_FILTER bits.
aq_required IAVF_FLAG_AQ_DEL_CLOUD_FILTER bit is being set in
iavf_down and iavf_delete_clsflower, and are never cleared.
aq_required IAVF_FLAG_AQ_ADD_CLOUD_FILTER bit is being set in
iavf_handle_reset and iavf_configure_clsflower, and are never
cleared.
Since the aq_required is not zero, iavf_watchdog_task is setting the
queue_delayed_work to 20 msec instead of the longer delay.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jakub Pawlak [Tue, 14 May 2019 17:37:07 +0000 (10:37 -0700)]
iavf: Refactor init state machine
Cleanup of init state machine, move state specific
code to separate functions and rewrite the
iavf_init_task() function.
Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jan Sokolowski [Tue, 14 May 2019 17:37:06 +0000 (10:37 -0700)]
iavf: Refactor the watchdog state machine
Refactor the watchdog state machine implementation.
Add the additional state __IAVF_COMM_FAILED to process
the PF communication fails. Prepare the watchdog state machine
to integrate with init state machine.
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jakub Pawlak [Tue, 14 May 2019 17:37:05 +0000 (10:37 -0700)]
iavf: Remove timer for work triggering, use delaying work instead
Remove the watchdog timer, instead declare watchdog task
as delayed work and use dedicated workqueue to service driver
tasks. The dedicated driver workqueue iavf_wq is common
for all driver instances.
Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jakub Pawlak [Tue, 14 May 2019 17:37:04 +0000 (10:37 -0700)]
iavf: Move commands processing to the separate function
Move the commands processing outside the watchdog_task()
function. This reduce length and complexity of the function
which is mainly designed to process the watchdog state machine.
Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Avinash Dayanand [Tue, 14 May 2019 17:37:03 +0000 (10:37 -0700)]
iavf: Fix the math for valid length for ADq enable
There was a calculation error in virtchnl regarding the valid
length which was fixed recently and a corresponding change needs
to go into the code while we enable ADq.
Signed-off-by: Avinash Dayanand <avinash.dayanand@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
iavf: Change GFP_KERNEL to GFP_ATOMIC in kzalloc()
iavf_add_vlan() is being called in atomic context
so kzalloc() needs GFP_ATOMIC. This patch fixes it.
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Mitch Williams [Tue, 14 May 2019 17:37:01 +0000 (10:37 -0700)]
iavf: wait longer for close to complete
On some hardware/driver/architecture combinations, it may take longer
than 200msec for all close operations to be completed, causing a
spurious error message to be logged.
Increase the timeout value to 500msec to avoid this erroneous error.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Mitch Williams [Tue, 14 May 2019 17:37:00 +0000 (10:37 -0700)]
iavf: use signed variable
The counter variable in iavf_clean_tx_irq starts out negative and climbs
to 0. So allocating it as u16 is actually a really bad idea that just
happens to work because the value underflows and overflows consistently
on most architectures.
Replace the u16 with an int so signed math works as expected.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
iavf: Create VLAN tag elements starting from the first element
This patch changes how VLAN tag are being populated and programmed into
the HW - Instead of start adding VF VLAN tag from the last member of the
element list, start from the first member of the list, until number of
allowed VLAN tags is exhausted in the HW.
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When propagating mounts across mount namespaces owned by different user
namespaces it is not possible anymore to move or umount the mount in the
less privileged mount namespace.
Here is a reproducer:
sudo mount -t tmpfs tmpfs /mnt
sudo --make-rshared /mnt
# create unprivileged user + mount namespace and preserve propagation
unshare -U -m --map-root --propagation=unchanged
# now change back to the original mount namespace in another terminal:
sudo mkdir /mnt/aaa
sudo mount -t tmpfs tmpfs /mnt/aaa
# now in the unprivileged user + mount namespace
mount --move /mnt/aaa /opt
Unfortunately, this is a pretty big deal for userspace since this is
e.g. used to inject mounts into running unprivileged containers.
So this regression really needs to go away rather quickly.
The problem is that a recent change falsely locked the root of the newly
added mounts by setting MNT_LOCKED. Fix this by only locking the mounts
on copy_mnt_ns() and not when adding a new mount.
Fixes: 3bd045cc9c4b ("separate copying and locking mount tree on cross-userns copies") Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Tested-by: Christian Brauner <christian@brauner.io> Acked-by: Christian Brauner <christian@brauner.io> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Christian Brauner <christian@brauner.io> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Eric Biggers [Wed, 12 Jun 2019 18:43:13 +0000 (11:43 -0700)]
vfs: fsmount: add missing mntget()
sys_fsmount() needs to take a reference to the new mount when adding it
to the anonymous mount namespace. Otherwise the filesystem can be
unmounted while it's still in use, as found by syzkaller.
Reported-by: Mark Rutland <mark.rutland@arm.com> Reported-by: syzbot+99de05d099a170867f22@syzkaller.appspotmail.com Reported-by: syzbot+7008b8b8ba7df475fdc8@syzkaller.appspotmail.com Fixes: 93766fbd2696 ("vfs: syscall: Add fsmount() to create a mount for a superblock") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Jiri Pirko [Mon, 17 Jun 2019 16:02:32 +0000 (18:02 +0200)]
net: sched: cls_matchall: allow to delete filter
Currently user is unable to delete the filter. See following example:
$ tc filter add dev ens16np1 ingress pref 1 handle 1 matchall action drop
$ tc filter show dev ens16np1 ingress
filter protocol all pref 1 matchall chain 0
filter protocol all pref 1 matchall chain 0 handle 0x1
in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 1 bind 1
$ tc filter del dev ens16np1 ingress pref 1 handle 1 matchall action drop
RTNETLINK answers: Operation not supported
Implement tcf_proto_ops->delete() op and allow user to delete the filter.
Reported-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Mon, 17 Jun 2019 11:42:14 +0000 (12:42 +0100)]
net: hns3: fix dereference of ae_dev before it is null checked
Pointer ae_dev is null checked however, prior to that it is dereferenced
when assigned pointer ops. Fix this by assigning pointer ops after ae_dev
has been null checked.
Addresses-Coverity: ("Dereference before null check") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This is first attempt at sending a small series. Order is important
because one bug (policy validation) prevents us from encountering the
more important 'OOPS' generating bug in action creation. Fix the OOPS
first.
Confession time: Until very recently, development of this module has
been done on 'net-next' tree to 'clean compile' level with run-time
testing on backports to 4.14 & 4.19 kernels under openwrt. It turns out
that sched: action: based code has been under more active change than I
realised.
During the back & forward porting during development & testing, the
critical ACT_P_CREATED return code got missed despite being in the 4.14
& 4.19 backports. I have now gone through the init functions, using
act_csum as reference with a fine toothed comb and am happy they do the
same things.
This issue hadn't been caught till now due to another issue caused by
new strict nla_parse_nested function failing parsing validation before
action creation.
Thanks to Marcelo Leitner <marcelo.leitner@gmail.com> for flagging
extack deficiency (fixed in 733f0766c3de sched: act_ctinfo: use extack
error reporting) which led to b424e432e770 ("netlink: add validation of
NLA_F_NESTED flag") and 8cb081746c03 ("netlink: make validation more
configurable for future strictness”) which led to the policy validation
fix, which then led to the action creation fix both contained in this
series.
If I ever get to a developer conference please feel free to
tar/feather/apply cone of shame.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix nla_policy definition by specifying an exact length type attribute
to CTINFO action paraneter block structure. Without this change,
netlink parsing will fail validation and the action will not be
instantiated.
8cb081746c03 ("netlink: make validation more configurable for future")
introduced much stricter checking to attributes being passed via
netlink. Existing actions were updated to use less restrictive
deprecated versions of nla_parse_nested.
As a new module, act_ctinfo should be designed to use the strict
checking model otherwise, well, what was the point of implementing it.
Confession time: Until very recently, development of this module has
been done on 'net-next' tree to 'clean compile' level with run-time
testing on backports to 4.14 & 4.19 kernels under openwrt. This is how
I managed to miss the run-time impacts of the new strict
nla_parse_nested function. I hopefully have learned something from this
(glances toward laptop running a net-next kernel)
There is however a still outstanding implication on iproute2 user space
in that it needs to be told to pass nested netlink messages with the
nested attribute actually set. So even with this kernel fix to do
things correctly you still cannot instantiate a new 'strict'
nla_parse_nested based action such as act_ctinfo with iproute2's tc.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Use correct return value on action creation: ACT_P_CREATED.
The use of incorrect return value could result in a situation where the
system thought a ctinfo module was listening but actually wasn't
instantiated correctly leading to an OOPS in tcf_generic_walker().
Confession time: Until very recently, development of this module has
been done on 'net-next' tree to 'clean compile' level with run-time
testing on backports to 4.14 & 4.19 kernels under openwrt. During the
back & forward porting during development & testing, the critical
ACT_P_CREATED return code got missed despite being in the 4.14 & 4.19
backports. I have now gone through the init functions, using act_csum
as reference with a fine toothed comb. Bonus, no more OOPSes. I
managed to also miss this issue till now due to the new strict
nla_parse_nested function failing validation before action creation.
As an inexperienced developer I've learned that
copy/pasting/backporting/forward porting code correctly is hard. If I
ever get to a developer conference I shall don the cone of shame.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Mon, 17 Jun 2019 09:20:54 +0000 (05:20 -0400)]
vhost_net: disable zerocopy by default
Vhost_net was known to suffer from HOL[1] issues which is not easy to
fix. Several downstream disable the feature by default. What's more,
the datapath was split and datacopy path got the support of batching
and XDP support recently which makes it faster than zerocopy part for
small packets transmission.
It looks to me that disable zerocopy by default is more
appropriate. It cold be enabled by default again in the future if we
fix the above issues.