This patch updates wcd9335 bindings with recommended properties.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: add helper to change platform name for all dailinks
To reuse the same machine drivers with Atom/SST, Skylake and SOF, we
need to change the default platform_name (or platforms->name in the
"modern" representation).
So far, this override was done with an automatic override, which was
broken by a set of changes for DT platforms related to deferred probe
handling.
This automatic override is actually not really needed, the machine
driver can already receive the platform name as a platform_data
parameter. This is used e.g. for HDaudio support where we have
different PCI aliases used for different platforms. We can reuse the
same mechanism and modify the machine drivers to override the dailinks
prior to registrating the card.
This will require additional work for SOF, but with this helper it'll
be just two lines of additional code per machine driver which is
reused, not the end of the world.
This helper can be simplified when all drivers have transitioned to
the "modern" representation of dailinks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Yizhuo [Fri, 25 Jan 2019 18:45:37 +0000 (10:45 -0800)]
ASoC: rt5651: Variable "ret" in function rt5651_i2c_probe() could be uninitialized
In function rt5651_i2c_probe(), local variable "ret" could
be uninitialized if function regmap_read() returns -EINVAL.
However, this value is used in if statement. This is
potentially unsafe.
Signed-off-by: Yizhuo <yzhai003@ucr.edu> Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: pcm512x: Fix clocking calculations when not using the PLL
The rationale behind the current calculation is somewhat obscure [1]
and can yield slightly wrong dividers in certain cases, which the
machine drivers for some boards (like the HiFiBerry DAC+ Pro)
seemingly try to circumvent, by updating the rate fraction so as to
suit this calculation.
The updated calculation should correctly yield the smallest bit clock
rate that would fit the frame.
ASoC: pcm512x: Implement the set_bclk_ratio interface
Some boards, such as the HiFiBerry DAC+ Pro, use a pair of external
oscillators, to generate 44.1 or 48kHz multiples and are forced to
resort to hacks [1] in order to support 24-bit data without ending up
with fractional dividers. This patch allows the machine driver to use
32-bit frames for 24-bit data to avoid such issues.
Although the datasheet (p. 15) seems to suggest that only a handful
of ratios are supported, it's not very explicit about it, so we allow
the full range of values supported by the underlying register in the
callback, to avoid needlessly rejecting potentially usable
configurations.
Colin Ian King [Thu, 24 Jan 2019 17:37:35 +0000 (17:37 +0000)]
ASoC: Intel: make const arrays static, reduces object code size
Don't populate the const arrays on the stack but instead make
it static. Makes the object code smaller, for example:
Before:
text data bss dec hex filename
14107 8832 224 23163 5a7b bytcht_es8316.o
After:
text data bss dec hex filename
14015 8896 224 23135 5a5f bytcht_es8316.o
(gcc version 8.2.0 x86_64)
Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Tue, 22 Jan 2019 17:36:11 +0000 (17:36 +0000)]
ASoC: core: Fix multi-CODEC setups
Revert 10dff9b0d (ASoC: soc-core: use for_each_link_codecs() for
dai_link codecs) for now as Sylwester Nawrocki reports that it causes
oopses on at least Odroid boards.
Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: simple-card: rename to asoc_simple_card_canonicalize_platform()
Current simple-card is using asoc_simple_card_canonicalize_dailink().
Its naming is "dailink", but is for "platform".
We already have asoc_simple_card_canonicalize_cpu() for "cpu",
let's follow same naming rule.
It never return error, so, void function is better idea.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
We need to cleanup component when soc_probe_component() was
failed, or when soc_remove_component() was called.
But they are cleanuping component on each way.
(And soc_probe_component() doesn't call snd_soc_dapm_free(),
but it should).
Same code in many places makes code un-understandable.
This patch adds new soc_cleanup_component() and call it from
snd_probe_component() and snd_remove_component().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
We need to cleanup card resources when snd_soc_instantiate_card() was
failed, or when snd_soc_unbind_card() was called.
But they are cleanuping card resources on each way.
Same code in many places makes code un-understandable.
This patch reuses soc_cleanup_card_resources() for cleanuping code
resource. Then, it makes avoiding cleanup order.
It will be called from snd_soc_instantiate_card() and
snd_soc_unbind_card().
Then, original soc_cleanup_card_resources() included
snd_soc_flush_all_delayed_work(), but it is now separated.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: soc-core: add new snd_soc_flush_all_delayed_work()
soc-core is calling flush_delayed_work() many times for same purpose.
Same code in many places makes code un-understandable.
This patch adds new snd_soc_flush_all_delayed_work() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Current snd_soc_dai_link is starting to use snd_soc_dai_link_component
(= modern) style for Platform, but it is still assuming single Platform
so far. We will need to have multi Platform support in the not far
future.
Currently only simple card is using it as sound card driver,
and other drivers are converted to it from legacy style by
snd_soc_init_platform().
To avoid future problem of multi Platform support, let's add
num_platforms before it is too late.
In the same time, to make it same naming mothed, "platform" should
be "platforms". This patch fixup it too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: soc.h: add explanation of legacy/modern style of dai_link
Current ALSA SoC is assuming 1 CPU 1 Platform (= DMA) style system.
Because of this background, it is directly using
xxx_name / xxx_of_node / xxx_dai_name on dai_link.
Let's call it as legacy style here.
More complex style system like multi CPU multi Platform (= DMA) will
coming. To supporting it, we can use snd_soc_dai_link_component on
dai_link. Let's call it as modern style here.
But current ALSA SoC can't support it so far. Thus, we need to have
multi CPU / multi Codec / multi Platform style in the future on ALSA SoC.
Currently we already have multi Codec support. Platform is starting to
use modern style on dai_link, but still style only. Multi Platform is
not yet implemented. And we still don't have multi CPU support on ALSA
SoC, and not have modern style either.
Currently, if driver is using legacy style Codec/Platform, it will be
converted to modern style on soc-core. This means, we are using glue code
for legacy vs modern style so far on ALSA SoC.
We can fully switch to modern style on all drivers if ALSA SoC supported
modern style for CPU, and then, legacy style code will be removed from
ALSA SoC.
Untile then, we need to keep both legacy/modern style and its glue code.
This patch adds such future plan and background on soc.h
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Fri, 18 Jan 2019 19:14:36 +0000 (19:14 +0000)]
Merge tag 'asoc-fix-v5.0-rc2' into asoc-5.1
ASoC: Fixes for v5.0
Quite a big batch of fixes here. There's a couple of things going on,
the main one is that we found some issues with not deferring probe when
we should, causing us to skip some driver initialization. The fixes for
this then in turn exposed some issues with how we were searching for
components which had previously gone unnoticed due to the original
issue.
There's also been the normal driver specific stuff and there's been what
looks like several batches of automated scanning for issues which have
generated quite a large set of smaller fixes for potential crashes and
missed error handling.
Shengjiu Wang [Fri, 18 Jan 2019 14:26:46 +0000 (14:26 +0000)]
ASoC: fsl_sai: Remove expensive print in irq handler
When stopping audio, ASoC will first stop DMA then CPU DAI.
Sometimes there is a delay between DMA stop and CPU DAI stop, which
triggers an underrun error. Now, because of the delay introduced
by dev_err another underrun error will occur causing a vicious circle
making impossible to stop CPU DAI.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Stefan Agner [Fri, 18 Jan 2019 09:06:56 +0000 (10:06 +0100)]
ASoC: imx-spdif: don't print EPROBE_DEFER as error
Probe deferral is to be expected during normal operation, so avoid
printing an error when it is encountered.
Removing the goto would not be strictly necessary. However, if
code gets added later, the cleanup in the EPROBE_DEFER case likely
would get missed.
Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Stefan Agner [Fri, 18 Jan 2019 09:06:55 +0000 (10:06 +0100)]
ASoC: fsl_spdif: don't print EPROBE_DEFER as error
Probe deferral is to be expected during normal operation, so avoid
printing an error when it is encountered.
Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Stefan Agner [Fri, 18 Jan 2019 09:06:54 +0000 (10:06 +0100)]
ASoC: imx-sgtl5000: don't print EPROBE_DEFER as error
Probe deferral is to be expected during normal operation, so avoid
printing an error when it is encountered.
Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Stefan Agner [Fri, 18 Jan 2019 09:06:53 +0000 (10:06 +0100)]
ASoC: imx-sgtl5000: lower log level for potential probe deferral cases
Not finding the codec/SSI instance can be due to probe deferral.
Do not print error messages in those cases.
Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Stefan Agner [Fri, 18 Jan 2019 09:06:52 +0000 (10:06 +0100)]
ASoC: imx-sgtl5000: put of nodes if finding codec fails
Make sure to properly put the of node in case finding the codec
fails.
Fixes: 81e8e4926167 ("ASoC: fsl: add sgtl5000 clock support for imx-sgtl5000") Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Check return value from call to devm_kzalloc() in order to prevent a
potential NULL pointer dereference.
Also, notice that it makes no sense to allocate any resources if
res = platform_get_resource(pdev, IORESOURCE_MEM, 0); fails,
so move the call to devm_kzalloc() below the mentioned code.
Lastly, improve the use of sizeof in the call to devm_kzalloc() by
changing it from sizeof(struct i2s_dev_data) to sizeof(*adata)
This issue was detected with the help of Coccinelle.
Fixes: ac289c7ec0bc ("ASoC: amd: add ACP3x PCM platform driver") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Silvio Cesare [Tue, 15 Jan 2019 03:27:27 +0000 (04:27 +0100)]
ASoC: imx-audmux: change snprintf to scnprintf for possible overflow
Change snprintf to scnprintf. There are generally two cases where using
snprintf causes problems.
1) Uses of size += snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the
buffer size (SIZE) is, then size will end up larger than SIZE. In later
uses of snprintf, SIZE - size will result in a negative number, leading
to problems. Note that size might already be too large by using
size = snprintf before the code reaches a case of size += snprintf.
2) If size is ultimately used as a length parameter for a copy back to user
space, then it will potentially allow for a buffer overflow and information
disclosure when size is greater than SIZE. When the size is used to index
the buffer directly, we can have memory corruption. This also means when
size = snprintf... is used, it may also cause problems since size may become
large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel
configuration.
The solution to these issues is to use scnprintf which returns the number of
characters actually written to the buffer, so the size variable will never
exceed SIZE.
Signed-off-by: Silvio Cesare <silvio.cesare@gmail.com> Cc: Timur Tabi <timur@kernel.org> Cc: Nicolin Chen <nicoleotsuka@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Xiubo Li <Xiubo.Lee@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Kees Cook <keescook@chromium.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
There is a potential NULL pointer dereference in case devm_kzalloc()
fails and returns NULL.
Fix this by adding a NULL check on rt5514_dsp.
This issue was detected with the help of Coccinelle.
Fixes: 6eebf35b0e4a ("ASoC: rt5514: add rt5514 SPI driver") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Silvio Cesare [Sat, 12 Jan 2019 15:28:43 +0000 (16:28 +0100)]
ASoC: dapm: change snprintf to scnprintf for possible overflow
Change snprintf to scnprintf. There are generally two cases where using
snprintf causes problems.
1) Uses of size += snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the
buffer size (SIZE) is, then size will end up larger than SIZE. In later
uses of snprintf, SIZE - size will result in a negative number, leading
to problems. Note that size might already be too large by using
size = snprintf before the code reaches a case of size += snprintf.
2) If size is ultimately used as a length parameter for a copy back to user
space, then it will potentially allow for a buffer overflow and information
disclosure when size is greater than SIZE. When the size is used to index
the buffer directly, we can have memory corruption. This also means when
size = snprintf... is used, it may also cause problems since size may become
large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel
configuration.
The solution to these issues is to use scnprintf which returns the number of
characters actually written to the buffer, so the size variable will never
exceed SIZE.
Signed-off-by: Silvio Cesare <silvio.cesare@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Kees Cook <keescook@chromium.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Mark Brown <broonie@kernel.org>
Matthias Reichl [Tue, 15 Jan 2019 16:51:07 +0000 (17:51 +0100)]
ASoC: core: Don't defer probe on optional, NULL components
cpu and platform are optional components in DAI links. For example
codec-codec links usually have no platform set.
Call snd_soc_find_component only if the name or of_node of
a cpu or platform is set. Otherwise it will return NULL and
soc_init_dai_link bails out immediately with -EPROBE_DEFER,
meaning registering a card with NULL cpu or platform in DAI links
can never succeed.
Fixes: 8780cf1142a5 ("ASoC: soc-core: defer card probe until all component is added to list") Signed-off-by: Matthias Reichl <hias@horus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Mon, 14 Jan 2019 23:29:36 +0000 (23:29 +0000)]
ASoC: core: Make snd_soc_find_component() more robust
There are some use cases where you're checking for a lot of things on a
card and it makes sense that you might end up trying to call
snd_soc_find_component() without either a name or an of_node. Currently
in that case we try to dereference the name and crash but it's more
useful to allow the caller to just treat that as a case where we don't
find anything, that error handling will already exist.
Inspired by a patch from Ajit Pandey fixing some callers.
Fixes: 8780cf1142a5 ("ASoC: soc-core: defer card probe until all component is added to list") Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Curtis Malainey [Fri, 11 Jan 2019 00:21:04 +0000 (16:21 -0800)]
ASoC: soc-core: fix init platform memory handling
snd_soc_init_platform initializes pointers to snd_soc_dai_link which is
statically allocated and it does this by devm_kzalloc. In the event of
an EPROBE_DEFER the memory will be freed and the pointers are left
dangling. snd_soc_init_platform sees the dangling pointers and assumes
they are pointing to initialized memory and does not reallocate them on
the second probe attempt which results in a use after free bug since
devm has freed the memory from the first probe attempt.
Since the intention for snd_soc_dai_link->platform is that it can be set
statically by the machine driver we need to respect the pointer in the
event we did not set it but still catch dangling pointers. The solution
is to add a flag to track whether the pointer was dynamically allocated
or not.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
AES channel status carries various audio parameters. If channel status is
detected, current patch extracts sample rate and bit depth parameters of
the incoming stream during capture.
Signed-off-by: Maruthi Srinivas Bayyavarapu <maruthi.srinivas.bayyavarapu@xilinx.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: msm8916-wcd-digital: remove few unused variables
This patch removes unused variables which also fixes below warnings:
msm8916-wcd-digital.c:245:30: warning: 'rx2_mix2_inp1_chain_enum'
defined but not used [-Wunused-const-variable=]
static const struct soc_enum rx2_mix2_inp1_chain_enum = SOC_ENUM_SINGLE(
^~~~~~~~~~~~~~~~~~~~~~~~
msm8916-wcd-digital.c:234:30: warning: 'rx_mix2_inp1_chain_enum'
defined but not used [-Wunused-const-variable=]
static const struct soc_enum rx_mix2_inp1_chain_enum = SOC_ENUM_SINGLE(
^~~~~~~~~~~~~~~~~~~~~~~
msm8916-wcd-digital.c:224:26: warning: 'adc2_mux_text'
defined but not used [-Wunused-const-variable=]
static const char *const adc2_mux_text[] = { "ZERO", "INP2", "INP3" };
^~~~~~~~~~~~~
msm8916-wcd-digital.c:223:26: warning: 'rx_mix2_text'
defined but not used [-Wunused-const-variable=]
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
Anders Roxell [Mon, 14 Jan 2019 09:55:40 +0000 (10:55 +0100)]
ASoC: cs4341: fix waring unused-function
The driver cs4341 can be built with SPI and/or I2C, but it has to be one
of them at least. When I2C is set as a module we see the warning below:
sound/soc/codecs/cs4341.c:213:12: warning: ‘cs4341_probe’
defined but not used [-Wunused-function]
static int cs4341_probe(struct device *dev)
^~~~~~~~~~~~
Rework so that we use IS_ENABLED instead of defined. Also change so
SND_SOC_CS4341 depends on SND_SOC_I2C_AND_SPI to we dont' get a link
error when SND_SOC_CS4341=y, I2C=m and REGMAP_I2C=m is set.
Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
Rohit kumar [Thu, 10 Jan 2019 09:02:41 +0000 (14:32 +0530)]
ASoC: soc-core: Hold client_mutex around soc_init_dai_link()
soc_init_dai_link() calls soc_find_component() which needs
to be within client_mutex lock. Add client_mutex lock around
soc_init_dai_link() in snd_soc_register_card() to avoid
lockdep warning.
Fixes: 8780cf1142a5 ("ASoC: soc-core: defer card probe until all component is added to list") Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> Signed-off-by: Ajit Pandey <ajitp@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
Wei Yongjun [Thu, 10 Jan 2019 01:43:09 +0000 (01:43 +0000)]
ASoC: Intel: bytcht_es8316: use correct drvdata in snd_byt_cht_es8316_mc_remove()
The snd_byt_cht_es8316_mc_remove() use the platform drvdata as a type
of 'struct byt_cht_es8316_private', but snd_byt_cht_es8316_mc_probe()
set it to 'struct snd_soc_card', as suggested by Dan Carpenter, fix
the usage in snd_byt_cht_es8316_mc_remove().
Fixes: 0d3e91da0750 ("ASoC: Intel: bytcht_es8316: Add external speaker mux support") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Mac Chiang [Wed, 5 Dec 2018 10:11:19 +0000 (18:11 +0800)]
ASoC: Intel: Boards: move the codec PLL configuration to _init
move the codec PLL to rt5682_codec_init, because codec only need to config the clock source/PLL once.
As the result, remove the platform_clock_controls since no need to control clock anymore.
Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mac Chiang <mac.chiang@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Adam Thomson [Tue, 8 Jan 2019 09:13:28 +0000 (09:13 +0000)]
ASoC: da7219: Add recalc_rate function to return DAI clock rate
By making MCLK parent of DAI clocks, when querying the rate of the
clock the rate returned is now given from the parent clock so
gives the MCLK rate rather than 0 as previously returned. This is
a bit misleading, and actually there's no major reason why we can't
at least return the DAI WCLK rate, as set in HW, so that's what we
now do.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Adam Thomson [Mon, 7 Jan 2019 16:11:46 +0000 (16:11 +0000)]
ASoC: da7219: MCLK should be enabled before DAI clocks
For platforms using the Common Clock Framework to control the
codec's DAI clocks, MCLK should be enabled prior to DAI clocks
being turned on. For some platforms the codec is already
provided with an MCLK reference and can therefore control MCLK
itself as it needs to.
To improve functionality MCLK is now added as a parent to the
DAI clocks, if MCLK was provided, so that if they are enabled MCLK
will automatically be enabled as a prerequisite by the CCF.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Ajit Pandey [Wed, 9 Jan 2019 08:47:07 +0000 (14:17 +0530)]
ASoC: soc-core: defer card probe until all component is added to list
DAI component probe is not called if it is not present
in component list during sound card registration.
Check if component is available in component list for
platform and cpu dai before soundcard registration.
Signed-off-by: Ajit Pandey <ajitp@codeaurora.org> Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
Yizhuo [Mon, 7 Jan 2019 20:12:32 +0000 (12:12 -0800)]
ASoC: rt274: Variable "buf" in function rt274_jack_detect() could be uninitialized
In function rt274_jack_detect(), local variable "buf" could
be uninitialized if function regmap_read() returns -EINVAL.
However, it will be used to calculate "hp" and "mic" and
make their value unpredictable while those value are used
in the caller. This is potentially unsafe.
Signed-off-by: Yizhuo <yzhai003@ucr.edu> Signed-off-by: Mark Brown <broonie@kernel.org>
Agrawal, Akshu [Tue, 8 Jan 2019 10:24:40 +0000 (10:24 +0000)]
ASoC: ADAU7002: Add optional delay before start of capture
On capture through some of dmic we observe a glitch at the
start of record. This is because we start capturing even before
dmic is ready to send out data.
The optional delay will be applied after enabling the mic.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Hans de Goede [Sat, 29 Dec 2018 23:00:25 +0000 (00:00 +0100)]
ASoC: Intel: bytcr_rt5651: Add quirk for PoV TAB-P1006W-232 (v1.0) tablet
Add a DMI quirk for the Point of View TAB-P1006W-232 (v1.0) tablet, this
tablet is special in a number of ways:
1) It uses the 2nd GPIO resource in the ACPI tables for jack-detect rather
then using the rt5651 codec's builtin jack-detect functionality
2) It uses the 3th GPIO resource in the ACPI tables to control the
external amplifier rather then the usual first non GpioInt resource and
the GPIO is active-low.
3) It is a BYTCR device, without a CHAN package and it uses SSP0-AIF1
rather then the default SSP0-AIF2.
4) Its internal mic is a digital mic (the first x86 rt5651 device that
I'm aware of which does this), combined with having its headset-mic
connected to IN2.
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Hans de Goede [Sat, 29 Dec 2018 23:00:24 +0000 (00:00 +0100)]
ASoC: Intel: bytcr_rt5651: Add support for jack-detect using an external GPIO
Some board designs hook the jack-detect up to an external GPIO, rather
then to one of the codec pins, add support for this.
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Add quirks module parameter to allow manually specifying quirks
from the kernel commandline (or modprobe.conf).
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 37c7401e8c1f ("ASoC: Intel: bytcr_rt5651: Fix DMIC map
headsetmic mapping"), changed the headsetmic mapping from IN3P to IN2P,
this was based on the observation that all bytcr_rt5651 devices I have
access to (7 devices) where all using IN3P for the headsetmic. This was
an attempt to unifify / simplify the mapping, but it was wrong.
None of those devices was actually using a digital internal mic. Now I've
access to a Point of View TAB-P1006W-232 (v1.0) tabler, which does use a
DMIC and it does have its headsetmic connected to IN2P, showing that the
original mapping was correct, so this commit reverts the change changing
the mapping back to IN2P.
Fixes: 37c7401e8c1f ("ASoC: Intel: bytcr_rt5651: Fix DMIC map ... mapping") Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Hans de Goede [Sat, 29 Dec 2018 23:00:21 +0000 (00:00 +0100)]
ASoC: rt5651: Add support for jack detect using an external GPIO
Some board designs hook the jack-detect up to an external GPIO,
rather then to one of the codec pins, add support for this.
Figuring out which GPIO to use is pretty much board specific so I've
chosen to let the machine driver pass the gpio_desc as data argument to
snd_soc_component_set_jack() rather then add support for getting the
GPIO to the codec driver. This keeps the codec code nice and clean.
Note that using an external GPIO for this conflicts with button-press
support, so this commit disables button-press support when an
external GPIO is used.
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Some BYT platforms have a RT5651 codec while using an ACPI node with
a HID of 10EC5640 to describe the coded. Add the 10EC5640 HID to the
acpi_device_id list, so that the rt5651 will bind to the codec on these
devices.
Like the rt5645 and rt5670 drivers which also have the 10EC5640 ACPI HID
in their acpi_device_id list for similar reasons, the rt5651 driver checks
the codecs device-id register so that it will only bind if the codec
actually is a rt5651 and it will ignore actual rt5640 codecs.
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Hans de Goede [Sat, 29 Dec 2018 23:00:19 +0000 (00:00 +0100)]
ASoC: Intel: common: Add quirk for PoV P1006W tablet
The Point of View TAB-P1006W-232 (v1.0) tablet uses 10EC5640 as
ACPI HID, but it has a rt5651 codec add a quirk for this.
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Current BSDSR/BSDISR are using temporary/generic settings, but it can't
handle all SRCx/SoC. It needs to handle correctry.
Otherwise, sampling rate converted sound channel will be broken if it
was TDM. One note is that it needs to overwrite settings on E3 case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: chaoliang qin <chaoliang.qin.jg@renesas.com> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Alison Wang [Wed, 26 Dec 2018 00:59:53 +0000 (08:59 +0800)]
ASoC: sgtl5000: Allow SCLK pad drive strength to be changed
This patch introduces "sclk-strength" property to allow SCLK pad drive
strength to be changed via device tree.
When running playback test on LS1028ARDB, Tx Frame sync error interrupt
will occur sometimes. Some noises also exist. After changing SCLK pad
drive strength to the maximum value, the issues are gone.
Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Kangjie Lu [Wed, 26 Dec 2018 02:29:48 +0000 (20:29 -0600)]
ASoC: atom: fix a missing check of snd_pcm_lib_malloc_pages
snd_pcm_lib_malloc_pages() may fail, so let's check its status and
return its error code upstream.
Signed-off-by: Kangjie Lu <kjlu@umn.edu> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
b-ak [Mon, 7 Jan 2019 17:00:22 +0000 (22:30 +0530)]
ASoC: tlv320aic32x4: Kernel OOPS while entering DAPM standby mode
During the bootup of the kernel, the DAPM bias level is in the OFF
state. As soon as the DAPM framework kicks in it pushes the codec
into STANDBY state.
The probe function doesn't prepare the clock, and STANDBY state
does a clk_disable_unprepare() without checking the previous state.
This leads to an OOPS.
Not transitioning from an OFF state to the STANDBY state fixes the
problem.
Signed-off-by: b-ak <anur.bhargav@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
Cosmin Samoila [Fri, 4 Jan 2019 09:17:38 +0000 (09:17 +0000)]
ASoC: Add MICFIL SoC Digital Audio Interface driver.
Add Digital Audio Interface driver that convers PDM bitstream to PCM
format.
Features:
- Fixed filtering characteristics for audio application.
- Full or partial set of channels operation with individual enable control.
- Programmable PDM clock generator.
- Programmable decimation rate.
- 16-bit signed output result.
- Overall stopband attenuation more than 80dB.
- Overall passband ripple less than 0.2dB.
Signed-off-by: Cosmin-Gabriel Samoila <cosmin.samoila@nxp.com> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Daniel Mack [Fri, 4 Jan 2019 18:55:30 +0000 (19:55 +0100)]
ASoC: eliminate left-over from Raumfeld machine driver removal
Commit f84a6273dd9107c ("ASoC: pxa: remove raumfeld machine driver")
removed the Raumfeld ASoC machine driver but forgot to kill one line
in the Makefile.
Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/rt298.c:992:6-8: WARNING: Comparison to bool
sound/soc/codecs/rt298.c:995:6-9: WARNING: Comparison to bool
sound/soc/codecs/rt298.c:317:5-7: WARNING: Comparison to bool
sound/soc/codecs/rt298.c:320:5-8: WARNING: Comparison to bool
sound/soc/codecs/rt298.c:348:5-7: WARNING: Comparison to bool
sound/soc/codecs/rt298.c:351:5-8: WARNING: Comparison to bool
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Bard liao [Sat, 5 Jan 2019 02:02:48 +0000 (20:02 -0600)]
ASoC: rt5645: store eq kcontrol byte in __be
The eq parameters binary is stored in __be. However, it is unsigned short
in rt5645_eq_param_s{} which will cause incorrect type assignment. So add
struct rt5645_eq_param_s_be16{} to store the eq binary and convert it to
unsigned short in rt5645->eq_param.
Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Reported by Sparse:
da7219.c:841:57: warning: dubious: x & !y
Cc: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
da7219.c:440:44: warning: cast to restricted __le16
da7219.c:461:13: warning: incorrect type in assignment (different base types)
da7219.c:461:13: expected unsigned short [unsigned] [usertype] val
da7219.c:461:13: got restricted __le16 [usertype] <noident>
da7219.c:1451:16: warning: incorrect type in assignment (different base types)
da7219.c:1451:16: expected unsigned short [unsigned] [usertype] offset
da7219.c:1451:16: got restricted __le16 [usertype] <noident>
da7219-aad.c:150:37: warning: incorrect type in assignment (different base types)
da7219-aad.c:150:37: expected unsigned short [unsigned] [usertype] tonegen_freq_hptest
da7219-aad.c:150:37: got restricted __le16 [usertype] <noident>
da7219-aad.c:157:37: warning: incorrect type in assignment (different base types)
da7219-aad.c:157:37: expected unsigned short [unsigned] [usertype] tonegen_freq_hptest
da7219-aad.c:157:37: got restricted __le16 [usertype] <noident>
Cc: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Reported by Coccinelle:
sound/soc/codecs/rt5651.c:750:2-17: WARNING: Assignment of bool to 0/1
sound/soc/codecs/rt5651.c:754:2-17: WARNING: Assignment of bool to 0/1
sound/soc/codecs/rt5651.c:2192:1-16: WARNING: Assignment of bool to 0/1
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Reported by Coccinelle:
sound/soc/codecs/max98927.c:508:2-20: WARNING: Assignment of bool to 0/1
sound/soc/codecs/max98927.c:889:3-28: WARNING: Assignment of bool to 0/1
sound/soc/codecs/max98927.c:891:3-28: WARNING: Assignment of bool to 0/1
sound/soc/codecs/max98927.c:893:2-27: WARNING: Assignment of bool to 0/1
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Reported by Coccinelle:
sound/soc/codecs/rt5640.c:980:2-17: WARNING: Assignment of bool to 0/1
sound/soc/codecs/rt5640.c:984:2-17: WARNING: Assignment of bool to 0/1
sound/soc/codecs/rt5640.c:2825:1-16: WARNING: Assignment of bool to 0/1
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Reported by Coccinelle:
sound/soc/codecs/rt286.c:927:5-7: WARNING: Comparison to bool
sound/soc/codecs/rt286.c:930:5-8: WARNING: Comparison to bool
sound/soc/codecs/rt286.c:299:5-7: WARNING: Comparison to bool
sound/soc/codecs/rt286.c:302:5-8: WARNING: Comparison to bool
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/rt274.c:958:6-8: WARNING: Comparison to bool
sound/soc/codecs/rt274.c:961:6-9: WARNING: Comparison to bool
sound/soc/codecs/rt274.c:384:5-7: WARNING: Comparison to bool
sound/soc/codecs/rt274.c:387:5-8: WARNING: Comparison to bool
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Reported by Coccinelle:
sound/soc/codecs/cs4271.c:226:2-16: WARNING: Assignment of bool to 0/1
sound/soc/codecs/cs4271.c:229:2-16: WARNING: Assignment of bool to 0/1
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: max98383: fix boolean assignments to true/false
Reported by Coccinelle:
sound/soc/codecs/max98373.c:411:2-20: WARNING: Assignment of bool to 0/1
sound/soc/codecs/max98373.c:922:2-27: WARNING: Assignment of bool to 0/1
sound/soc/codecs/max98373.c:924:2-27: WARNING: Assignment of bool to 0/1
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
projects / linux.git / log